Green synthesis of Fe3O4/ZnO magnetic core-shell nanoparticles by Petasites hybridus rhizome water extract and their application for the synthesis of pyran derivatives: Investigation of antioxidant and antimicrobial activity

In this research, Fe₃O₄/ZnO magnetic core-shell nanoparticles (Fe₃O₄/ZnO MCNPs) were synthesized through a green method using Petasites hybridus rhizome water extract as a reducing and stabilizing agent. The morphology and size of the Fe₃O₄/ZnO MCNPs was identified by X-ray diffraction, scanning electron microscopy, and Energy-dispersive X-ray spectroscopy (EDX) analysis. The catalytic activity of the Fe₃O₄/ZnO MCNPs was evaluated in the efficient and green preparation of pyran derivatives in excellent yield using three-component reactions of dimedone, aldehydes, and malononitrile in ethanol at room temperature. The ability of some synthesized compounds to scavenge the 2,2-diphenyl-1-picrylhydrazyl radical was measured and the results proved this observation. Moreover, the antimicrobial activity of some synthesized compounds was proved by employing the disk diffusion test on Gram-positive and Gram-negative bacteria. The results for the disk diffusion test showed that compounds ( 4c, 4d, 4f and 4g ) prevented bacterial growth.     

Recent developments of metallic nanoparticles and their catalytic activity in organic reactions

During the last two decades, with the development of nanotechnology, various nanomaterials have been designed and generated. Among them, hybrid organic–inorganic nanoparticles as a particular immobilizing carrier of the catalyst active sites have shown an important contribution in the current research studies. This is due to the large area and loads of active sites. This prominent review is focused on the novel various exa about the immobilization of nanoparticles with organic compounds as versatile and efficient catalysts in organic syntheses.     

Facile Tailoring of Structures for Controlled Release of Paracetamol from Sustainable Lignin Derived Platforms

Nowadays, sustainable materials are receiving significant attention due to the fact that they will be crucial for the development of the next generation of products and devices. In the present work, hydrogels have been successfully synthesized using lignin which is non-valorized biopolymer from the paper industry. Hydrogels were prepared via crosslinking with Poly(ethylene) glycol diglycidyl ether (PEGDGE). Different crosslinker ratios were used to determine their influence on the structural and chemical properties of the resulting hydrogels. It has been found that pore size was reduced by increasing crosslinker amount. The greater crosslinking density increased the swelling capacity of the hydrogels due to the presence of more hydrophilic groups in the hydrogel network. Paracetamol release test showed higher drug diffusion for hydrogels produced with a ratio lignin:PEGDGE 1:1. The obtained results demonstrate that the proposed approach is a promising route to utilize lignocellulose waste for producing porous materials for advanced biomedical applications in the pharmacy industry.     

Determination of trace amounts of nystatin in water and vaccine samples using sodium dodecyl sulfate-coated iron oxide magnetic nanoparticles followed by high-performance liquid chromatography–ultraviolet detection

In this work, magnetic solid-phase extraction based on sodium dodecyl sulfate-coated Fe₃O₄ nanoparticles has been successfully applied for extraction and preconcentration of trace amounts of nystatin from water and vaccine samples prior to high-performance liquid chromatography–ultraviolet detection. Various experimental parameters affecting extraction and recovery of the analyte, such as the amount of sodium dodecyl sulfate, pH of the sample solution, salt concentration, extraction time, sample volume and desorption conditions, were systematically studied and optimized. Under optimized conditions, nystatin was quantitatively extracted. Proper linear range with good coefficient of determination, (R ² > 0.99) and limit of detection and quantification (based on signal-to-noise ratios of 3 and 10) of 2.0 and 5.0 µg L^?1, over the investigated concentration range (5–700 µg L^?1), were obtained, respectively. The intra-day and inter-day relative standard deviations at 50 µg L^?1 level of NYS were 1.4 and 4.5% based on six replicate determinations. The accuracy of the method was evaluated by recovery measurements on spiked samples. Suitable recoveries of 96–102 and 26–44% were achieved (at spiked levels of 50, 300 and 500 µg L^?1) for water and vaccine samples, respectively.     

Developing Eco-Friendly and Cost-Effective Porous Adsorbent for Carbon Dioxide Capture

To address the issue of global warming and climate change issues, recent research efforts have highlighted opportunities for capturing and electrochemically converting carbon dioxide (CO₂). Despite metal doped polymers receiving widespread attention in this respect, the structures hitherto reported lack in ease of synthesis with scale up feasibility. In this study, a series of mesoporous metal-doped polymers (MRFs) with tunable metal functionality and hierarchical porosity were successfully synthesized using a one-step copolymerization of resorcinol and formaldehyde with Polyethyleneimine (PEI) under solvothermal conditions. The effect of PEI and metal doping concentrations were observed on physical properties and adsorption results. The results confirmed the role of PEI on the mesoporosity of the polymer networks and high surface area in addition to enhanced CO₂ capture capacity. The resulting Cobalt doped material shows excellent thermal stability and promising CO₂ capture performance, with equilibrium adsorption of 2.3 mmol CO₂/g at 0 °C and 1 bar for at a surface area 675.62 m²/g. This mesoporous polymer, with its ease of synthesis is a promising candidate for promising for CO₂ capture and possible subsequent electrochemical conversion.     

Doped Nano‐Sized Copper(I) Oxide (Cu2O) on Melamine?Formaldehyde Resin: a Highly Efficient Heterogeneous Nano Catalyst for ‘Click’ Synthesis of Some Novel 1H‐1,2,3‐Triazole Derivatives Having Antibacterial Activity

A facile and simple protocol for the 1,3‐dipolar cycloaddition of organic azides with terminal alkynes catalyzed by doped nano‐sized Cu₂O on melamine? formaldehyde resin (nano‐Cu₂O? MFR) as a new and convenient heterogeneous catalyst is described. In this method, ‘click’ cycloaddition of various structurally diverse β‐azido alcohols and alkynes in the presence of nano‐Cu₂O? MFR in H₂O/THF 1 : 2 furnished the corresponding 1,4‐disubstituted 1H‐1,2,3‐triazole adducts 1a – 1o in good to excellent yields at room temperature (Scheme and Table 3). The nano‐Cu₂O? MFR was characterized by scanning electron microscopy (SEM), X‐ray diffraction (XRD), inductively coupled plasma (ICP) analysis, and FT‐IR. The nano‐Cu₂O? MFR could be easily recovered and recycled from the reaction mixture and reused for many consecutive trials without significant decrease in activity (Table 4). The in vitro antibacterial activities of all synthesized compounds were tested on several Gram‐positive and/or Gram‐negative bacteria (Table 5). The results demonstrate the promising antibacterial activity for some of the synthesized compounds.