Water-assisted mechanical testing of polymeric thin-films

Thin films with a nanometer-scale thickness are of great interest to both scientific and industrial communities due to their numerous applications and unique behaviors different from the bulk. However, the understanding of thin-film mechanics is still greatly hampered due to their intrinsic fragility and the lack of commercially available experimental instruments. In this review, we first discuss the progression of thin-film mechanical testing methods based on the supporting substrate: film-on-solid substrate method, film-on-water tensile tests, and water-assisted free-standing tensile tests. By comparing past studies on a model polymer, polystyrene, the effect of different substrates and confinement effect on the thin-film mechanics is evaluated. These techniques have generated fruitful scientific knowledge in the field of organic semiconductors for the understanding of structure–mechanical property relationships. We end this review by providing our perspective for their bright prospects in much broader applications and materials of interest.     

A molecular fluorophore in citric acid/ethylenediamine carbon dots identified and quantified by multinuclear solid-state nuclear magnetic resonance

The composition of fluorescent polymer nanoparticles, commonly referred to as carbon dots, synthesized by microwave-assisted reaction of citric acid and ethylenediamine was investigated by ¹³C, ¹³C{¹H}, ¹H─¹³C, ¹³C{¹⁴N}, and ¹⁵N solid-state nuclear magnetic resonance (NMR) experiments. ¹³C NMR with spectral editing provided no evidence for significant condensed aromatic or diamondoid carbon phases. ¹⁵N NMR showed that the nanoparticle matrix has been polymerized by amide and some imide formation. Five small, resolved ¹³C NMR peaks, including an unusual ═CH signal at 84 ppm (¹H chemical shift of 5.8 ppm) and ═CN₂ at 155 ppm, and two distinctive ¹⁵N NMR resonances near 80 and 160 ppm proved the presence of 5-oxo-1,2,3,5-tetrahydroimidazo[1,2-a]pyridine-7-carboxylic acid (IPCA) or its derivatives. This molecular fluorophore with conjugated double bonds, formed by a double cyclization reaction of citric acid and ethylenediamine as first shown by Y. Song, B. Yang, and coworkers in 2015, accounts for the fluorescence of the carbon dots. Cross-peaks in a ¹H─¹³C HETCOR spectrum with brief ¹H spin diffusion proved that IPCA is finely dispersed in the polyamide matrix. From quantitative ¹³C and ¹⁵N NMR spectra, a high concentration (18 ± 2 wt%) of IPCA in the carbon dots was determined. A pronounced gradient in ¹³C chemical-shift perturbations and peak widths, with the broadest lines near the COO group of IPCA, indicated at least partial transformation of the carboxylic acid of IPCA by amide or ester formation.     

The largest strongly consecutive repeat-free code

Answering a question of Körner and Simonyi, this paper gives a strongly consecutive repeat-free code of maximal size in [b]ⁿ.     

Magnetism in electron-doped copper oxides

We report muon spin relaxation/rotation measurements on sintered powder samples of Nd_2−x Ce _x CuO_4−y and a large single crystal of Nd₂CuO_4−y . We find an electronic phase diagram which is quite similar to that of hole-doped superconductors such as La_2−x Sr _x CuO_4−y , although the doping of electrons into the system is less efficient in destroying the static moments on the copper spins. Static magnetic order in Nd₂CuO_4−y appears below about 250 K, and two spin reorientations are seen atT=75 K andT=35 K. Measurements of the magnetic field penetration depth have been unsuccessful due to the rare-earth paramagnetism of these materials.     

μSR studies of heavy fermion systems

We have performed both zero field and high transverse field measurements at dilution refrigerator temperatures on a number of heavy electron systems, examining the superconducting and magnetic properties of these interesting materials. Among the materials studied to date are UBe₁₃, URu₂Si₂ and U₆Fe. The magnetic field penetration depth in the superconducting state of UBe₁₃ is greater than 10000 Å, as no increase in the transverse field relaxation rate is observed belowT _c . A sharp increase in the precession frequency is seen, starting atT _c . This frequency shift shows little temperature dependence at low temperature; we found no clear evidence for unconventional superconductivity in this material. Zero field measurements in URu₂Si₂ show the weak antiferromagnetic transition at 17.5 K. Finally, we we found no clear evidence for unconventional superconductivity in this material. Zero field measurements in URu₂Si₂ show the weak antiferromagnetic transition at 17.5 K. Finally, we have observed relaxation in high transverse field due to the formation of a flux lattice in U₆Fe, a material where the electron effective mass is rather lighter than in other heavy fermion systems. The relaxation exhibits a sharp onset atT _c=3.9 K, and is flat at low temperatures as expected for a conventional superconductor.     

Quantum diffusion of muonium in GaAs

The diffusion rate of muonium in the III–V compound semiconductor GaAs has been determined from measurements of muon spinT ₁ relaxation induced by motion in the presence of nuclear hyperfine interactions. It is shown for the first time in a semiconductor that (a) there is a crossover of the transport mechanism at about 90 K from stochastic to zero-phonon hopping, as evidenced by a steep rise in the hop rate at lower temperatures, and that (b) the muonium diffuses at the hop rate of 10¹⁰ s⁻¹ (corresponding diffusion constantD≈10⁻⁶ cm²s⁻¹) at lower temperatures as well as at room temperature.     

Silver and palladium complexes of some aromatic azo and azoxy compounds

The complexing ability of derivatives of azobenzene (I) is well known (I) and responsible for the production of a wide variety of dyestuffs and analytical chemicals. While the azo group generally participates in the coordination, the determination of the degree of its interaction is complicated by other functional groups which are also coordinated with the transition metal. In a previous publication (2), we reported the preparation of the silver and palladium complexes of benzo[c]cinnoline (II) and proposed that these results might be used to explain the electron donor properties of azobenzene. We are now reporting the preparation of some additional complexes with ligands containing the azo group.     

Determination of trace elements in inorganic and organic materials by x-ray fluorescence spectroscopy

A new, almost universally applicable method for the trace analysis of inorganic and organic materials is described. The trace element (or elements) together with a suitable coprecipitating element is isolated from interfering elements by precipitation with a suitable organic or inorganic precipitant. The precipitate is then filtered on a paper disk and the collected trace element (or elements) is determined by X-ray analysis.     

Analysis of insecticidal proteins from Bacillus thuringiensis and recombinant Escherichia coli by capillary electrokinetic chromatography

Bacillus thuringiensis and recombinant Escherichia coli proteinaceous protoxins were subject to proteolysis and analyzed by capillary electrokinetic chromatography. Three resulting toxins (65 kDa) were baseline-resolved within 22 min using a 10 mM borate, pH 11 separation buffer consisting of 25 mM sodium dodecyl sulfate (SDS) and 30 mM phytic acid. The toxins displayed differential interactions with the SDS and phytic acid phases to effect their separation. The ion-pairing interaction between the analyte and phytic acid was also useful in preventing adsorption to the capillary walls and thus enhanced separation resolution and efficiency. The use of electrokinetic chromatography allows achievement of the separation in a significantly shorter time than conventional high-performance liquid chromatography (HPLC) using a diethylaminoethyl (DEAE) weak-anion exchanger.