基于错位格雷码的动态三维形貌测量方法

格雷码辅助相移技术可以实现具有较强鲁棒性与抗噪能力的三维（3D）形貌测量。为解决由待测物体不均匀的表面反射率、噪声和物体运动等因素造成的级次边沿误码问题，提出了一种基于错位格雷码的动态3D形貌测量方法。将传统格雷码图案在投影前预先移动半个条纹周期得到错位格雷码图案，再采用传统格雷码解码方法对二值化后的错位格雷码图案解码，可得到与截断相位完全错开的解码结果。对该解码结果进行修正后即可利用得到的正确的相位级次辅助截断相位成功展开。同时，为了提高测量精度，引入了一个虚拟相位平面以进一步拓展投影条纹周期数。实验结果表明，所提方法在使用N帧格雷码图案的情况下，可以编码周期数为2^N+1的投影条纹进行3D测量，其无需任何附加图案即可避免级次边沿误码问题，并有效提升了测量精度。复杂动态场景的3D重建结果证明，所提方法能够以2381 frame/s的速率实现高精度、高效率和高速的3D形貌测量。     

A control volume finite element method for three-dimensional three-phase flows

A novel control volume finite element method with adaptive anisotropic unstructured meshes is presented for three-dimensional three-phase flows with interfacial tension. The numerical framework consists of a mixed control volume and finite element formulation with a new P₁DG-P₂ elements (linear discontinuous velocity between elements and quadratic continuous pressure between elements). A “volume of fluid” type method is used for the interface capturing, which is based on compressive control volume advection and second-order finite element methods. A force-balanced continuum surface force model is employed for the interfacial tension on unstructured meshes. The interfacial tension coefficient decomposition method is also used to deal with interfacial tension pairings between different phases. Numerical examples of benchmark tests and the dynamics of three-dimensional three-phase rising bubble, and droplet impact are presented. The results are compared with the analytical solutions and previously published experimental data, demonstrating the capability of the present method.     

Surface‐Functionalized Nanoparticles by Olefin Metathesis: A Chemoselective Approach for In Vivo Characterization of Atherosclerosis Plaque

The use of click chemistry reactions for the functionalization of nanoparticles is particularly useful to modify the surface in a well‐defined manner and to enhance the targeting properties, thus facilitating clinical translation. Here it is demonstrated that olefin metathesis can be used for the chemoselective functionalization of iron oxide nanoparticles with three different examples. This approach enables, in one step, the synthesis and functionalization of different water‐stable magnetite‐based particles from oleic acid‐coated counterparts. The surface of the nanoparticles was completely characterized showing how the metathesis approach introduces a large number of hydrophilic molecules on their coating layer. As an example of the possible applications of these new nanocomposites, a focus was taken on atherosclerosis plaques. It is also demonstrated how the in vitro properties of one of the probes, particularly its Ca²⁺‐binding properties, mediate their final in vivo use; that is, the selective accumulation in atherosclerotic plaques. This opens promising new applications to detect possible microcalcifications associated with plaque vulnerability. The accumulation of the new imaging tracers is demonstrated by in vivo magnetic resonance imaging of carotids and aorta in the ApoE^?/? mouse model and the results were confirmed by histology.     

Application of Atmospheric Solids Analysis Probe Mass Spectrometry (ASAP-MS) in Petroleomics: Analysis of Condensed Aromatics Standards,Crude Oil,and Paraffinic Fraction

Atmospheric solids analysis probe mass spectrometry (ASAP-MS) is a powerful tool for analysis of solid and liquid samples. It is an excellent alternative for crude oil analysis without any sample preparation step. Here, ASAP-MS in positive ion mode, ASAP(+)-MS, has been optimized for analysis of condensed aromatics (CA) standards, crude oil, and paraffinic fraction samples using a Synapt G2-S HDMS. Initially, two methodologies were used to access the chemical composition of samples: (1) using a temperature gradient varying from 150 to 600 °C at a heating rate of 150 °C min^–1, and (2) with constant temperature of 300 and 400 °C. ASAP(+)-MS ionized many compounds with a typical petroleum profile, showing a greater signals range of m/z 250–1300 and 200–1400 for crude oil and paraffin samples, respectively. Such performance, mainly related to the detection of high molecular weight compounds (>1000 Da), is superior to that of other traditional ionization sources, such as ESI, APCI, DART, and DESI. Additionally, the CA standards were identified in both forms: radicals, [M]^+?, and protonated cations, [M + H]⁺, with minimum fragmentation. Therefore, ASAP was more efficient in accessing the chemical composition of nonpolar and polar compounds. It is promising in its application with ultrahigh resolution MS instruments, such as FT-ICR MS and Orbitrap, since molecular formulas with greater resolution and mass accuracy (<1 ppm) would be assigned.

Open image in new window

Graphical Abstract ?

     

Cooperative Chemotaxis of Magnesium Microswimmers for Corrosion Spotting

Numerous artificial micro- and nanomotors, as well as various swimmers have been inspired by living organisms that are able to move in a coordinated manner. Their cooperation has also gained a lot of attention because the resulting clusters are able to adapt to changes in their environment and to perform complex tasks. However, mimicking such a collective behavior remains a challenge. In the present work, magnesium microparticles are used as chemotactic swimmers with pronounced collective features, allowing the gradual formation of macroscopic agglomerates. The formed clusters act like a single swimmer able to follow pH gradients. This dynamic behavior can be used to spot localized corrosion events in a straightforward way. The autonomous docking of the swimmers to the corrosion site leads to the formation of a local protection layer, thus increasing corrosion resistance and triggering partial self-healing.     

Brominated Trihalomethylenones as Versatile Precursors to 3‐Ethoxy, ‐Formyl, ‐Azidomethyl, ‐Triazolyl,and 3‐Aminomethyl Pyrazoles

5‐Bromo[5,5‐dibromo]‐1,1,1‐trihalo‐4‐methoxy‐3‐penten[hexen]‐2‐ones are explored as precursors to the synthesis of 3‐ethoxymethyl‐5‐trifluoromethyl‐1H‐pyrazoles from a cyclocondensation reaction with hydrazine monohydrate in ethanol. 3‐Ethoxymethyl‐carboxyethyl ester pyrazoles were formed as a result of a substitution reaction of bromine and chlorine by ethanol. The dibrominated precursor furnished 3‐acetal‐pyrazole that was easily hydrolyzed to formyl group. In addition, brominated precursors were used in a nucleophilic substitution reaction with sodium azide to synthesize the 3‐azidomethyl‐5‐ethoxycarbonyl‐1H‐pyrazole from the reaction with hydrazine monohydrate. These products were submitted to a cycloaddition reaction with phenyl acetylene furnishing the 3‐[4(5)‐phenyl‐1,2,3‐triazolyl]5‐ ethoxycarbonyl‐1H‐pyrazoles and to reduction conditions resulting in 3‐aminomethyl‐1H‐pyrazole‐5‐carboxyethyl ester. The products were obtained by a simple methodology and in moderate to good yields.     

Non‐intrusive reduced‐order modeling for multiphase porous media flows using Smolyak sparse grids

In this article, we describe a non‐intrusive reduction method for porous media multiphase flows using Smolyak sparse grids. This is the first attempt at applying such an non‐intrusive reduced‐order modelling (NIROM) based on Smolyak sparse grids to porous media multiphase flows. The advantage of this NIROM for porous media multiphase flows resides in that its non‐intrusiveness, which means it does not require modifications to the source code of full model. Another novelty is that it uses Smolyak sparse grids to construct a set of hypersurfaces representing the reduced‐porous media multiphase problem. This NIROM is implemented under the framework of an unstructured mesh control volume finite element multiphase model. Numerical examples show that the NIROM accuracy relative to the high‐fidelity model is maintained, whilst the computational cost is reduced by several orders of magnitude. Copyright © 2016 John Wiley & Sons, Ltd.