基于LIBS技术的水泥粉末在线成分分析

在工业现场生产水泥的过程中，各种成分的含量直接影响着水泥的质量，因此如何快速准确地监测水泥中各个成分的含量意义重大。采用的实验方式为，将不经过任何预处理的水泥粉末直接放入位于二维移动平台上的物料盒中，通过激光诱导击穿光谱(LIBS)直接对水泥粉末表面的不同位置进行激发检测，对得到的光谱数据首先进行归一化和主成分分析等预处理操作，然后针对水泥中Ca, Si, Al, Fe, Mg五种元素，分别建立偏最小二乘(PLS)和支持向量回归(SVR)两种定量分析模型进行方法比较。此外，对比了粉末状水泥与压片式水泥两种测量方式的结果。实验结果表明，采用粉末状水泥直接测量的方式下，针对水泥样品元素浓度与所得到的光谱中特征线强度的关系，SVR方法比PLS方法更具优势，粉末状水泥直接测量的精度接近压片式测量的精度，说明LIBS技术对水泥粉末状样品直接在线测量具有可行性。     

卫星运动预测及规避的建模与求解

近年来,随着各国侦查卫星系统的不断完善,有效根据观测数据预测卫星的轨迹,同时建立适当的规避防范措施变得尤为重要·通过研究地面监测站监测的卫星数据及地理信息,提出了一种基于三维坐标系变换的卫星轨迹求解模型,具体建立模型的方法为:建立4种不同的坐标系,通过卫星坐标在4种坐标系中的变换,将地面检测站检测到的卫星数据进行处理,拟合出卫星的六个运动参数,得出卫星运动轨迹方程,并较为精准的预测卫星被观测站观测到的情况,以及任意时刻星下点的经纬度坐标.针对卫星的运动情况,为满足我方军事目标的运动需求,根据新疆地图建立军队行军路线的有向图,然后,在考虑卫星规避的情况下对每条路线进行模拟分析,最终,通过每条路线模拟分析的结果进行比对,得出最优的行军路线.     

灰色GM(1,1)模型研究综述

GM(1,1)是灰色预测理论的核心模型和基础模型.从累加生成方法、初值优化、背景值优化、参数估计方法、模型性质和模型拓展的视角,梳理了GM(1,1)模型的研究进展.明确了有待进一步研究的问题,对GM(1,1)模型的未来研究方向提出了建议.     

六聚吡咯/丝组缀合物结构的NMR和 ESI-MS/MS表征

利用片断合成法合成了具有DNA切割能力的六聚吡咯/丝组缀合物, 检测了该化合物的¹H、¹³C NMR 和ESI-MS/ MS 图谱, 确证了该化合物的结构, 通过¹H-¹H COSY, HSQC,HMBC等2D NMR 技术对其¹H 和¹³C NMR 数据进行了归属和解析, 并探讨了其ESI-MS/ MS 质谱裂解规律.     

Characterization of moisture mobility and diffusion in fresh tobacco leaves during drying by the TG–NMR analysis

This paper presents the stabilization effects of inorganic filler, cerium-doped lead zirconate titanate on high-density polyethylene. The filler was loaded in two concentrations (1 and 3 wt%). The dopant contents in PbZrO₃ were 0, 0.05, 0.075, 0.1 and 0.125 mol%. The degradation of hybrid samples was accomplished by γ-irradiation at various doses up to 200 kGy. The isothermal and nonisothermal chemiluminescence (CL) and thermal analysis (TG-DSC) were applied for the thermal stability characterization of modified HDPE samples. The mechanistic considerations and radiochemical consequences caused by the variation of filler concentration and doping level are discussed. The results demonstrate that the filler acts efficiently as stabilizer at low concentration of additive when the lower filler amount is present. The start of degradation precedes melting by four processes through which the chain scission and radical oxidation represent the essential degradation stage. The filler concentration influences the degradation due to the intimate interaction between solid-state defects and free radicals. The polymer protection against oxidation is based on the scavenging of radicals by the doping elements, that is, they trap and block radicals delaying material aging. The present results open a new perspective in the quality amelioration of organic products toward high durability.

     

抛体运动极值问题的几何解法

对于抛射体在给定方向上的最大射程问题,给出了简洁的几何解法,对速度、加速度、平均速度构成的矢量三角形,应用简单的数学方法,得到了极值条件和包络抛物线方程,并用于解决投掷铅球最佳角度问题.     

高温超导悬浮系统的振动属性研究

本文研究了YBCO高温超导磁悬浮系统在竖直方向上不同的悬浮高度,不同的振动频率扰动下的振动属性．研究表明在一般的小的扰动下,悬浮系统类似于一个弹簧系统,该系统可以恢复到初始的悬浮高度．而当系统受到一个共振频率的扰动时,系统会发生剧烈的振动,会引起能量的损失,悬浮高度的降低．系统的共振频率会随着系统初始悬浮高度的降低而增...     

A Simple X-ray Spectrometer and PC-based Data Acquisition System for Newly Developed X-ray Source Based on Laser Compton Scattering

A simple X-ray spectrometer and a PC-Based Data Acquisition System(DAS) have been developed newly in Shanghai Institute of Applied Physics(SINAP),Chinese Academy of Sciences (CAS) for the measurement of the X-ray source generated using laser Compton scattering.The system consists of liquid nitrogen cooled high resolution Si(Li) detector,electronics and a DAQ.The Si(Li) detector was designed and made by Center of Advanced Instruments in SINAP,CAS,it allows us to measure X-rays with the energy up to 60 keV and the energy resolution(FWHM) of 184 eV at 5.9 keV.We measured the system uncertainty was 0.2 eV and time drifting of detector was 0.05% both at 5.9 keV.The DAQ was based on Object-Oriented software LabVIEW 7.1,it has data on-line analysis and original data saved functions.     

4-氨基-7-硝基苯并-2-氧杂-1,3-二唑类衍生物的合成及其对汞离子的识别研究

以4-氯-7-硝基苯并-2-氧杂-1,3-二唑、乙二胺和溴乙酸乙酯等为原料,合成4-氨基-7-硝基苯并-2-氧杂-1,3-二唑类衍生物(NBD-OEt),通过IR、NMR和MS对其进行结构表征。研究NBD-OEt的吸收光谱和荧光光谱性质,探讨其在H2O/EtOH(60/40, V/V) pH 7.40的HEPES缓冲体系中对Hg₂ 的响应,以及NBD-OEt与Hg₂ 的结合模式。结果表明, 随Hg₂ 的不断加入可诱使NBD-OEt在476nm的吸收峰红移至514nm,并有两个等吸收点(347nm、482nm);其荧光发射峰由536nm红移至559nm,且在525nm出现等发射点;通过Job plot法测定NBD-OEt与Hg₂ 以1:1的计量比结合。     

Improving the properties of HDPE based separators for lithium ion batteries by blending block with copolymer PE-b-PEG

To improve the performances of HDPE-based separators, polyether chains were incorporated into HDPE membranes by blending with poly(ethylene-block-ethylene glycol) (PE-b-PEG) via thermally induced phase separation (TIPS) process. By measuring the composition, morphology, crystallinity, ion conductivity, etc, the influence of PE-b-PEG on structures and properties of the blend separator were investigated. It was found that the incorporated PEG chains yielded higher surface energy for HDPE separator and improved affinity to liquid electrolyte. Thus, the stability of liquid electrolyte trapped in separator was increased while the interfacial resistance between separator and electrode was reduced effectively. The ionic conductivity of liquid electrolyte soaked separator could reach 1.28 × 10-3 S.cm-1 at 25℃, and the electrochemical stability window was up to 4.5 V (versus Li + /Li). These results revealed that blending PE-b-PEG into porous HDPE membranes could efficiently improve the performances of PE separators for lithium batteries.