Phytochemical profiling and evaluation of modified resazurin microtiter plate assay of the roots of Trillium govanianum

Abstract

Trillium govanianum Wall. ex D. Don (Melanthiaceae alt. Trilliaceae), is native to the Himalayas. The present study, for the first time, was undertaken to explore the antimicrobial potential, to determine the minimum inhibitory concentration (MIC) values of the methanol extract of the roots of Trillium govanianum and its solid phase extraction (SPE) fractions by using resazurin microtiter assay (REMA) against Gram positive and Gram negative bacterial registered strains and to carry out phytochemical analysis. The remarkable amount of gallic acid equivalent phenolic and quercetin equivalent flavonoid content was manifested by MeOH extract (20.27?±?3.03?mg GAE/g DW and 9.25?±?0.50?mg QE/g DW respectively). The GC/MS analysis revealed the presence saturated and unsaturated components. Considerable level of antibacterial potential against Gram-positive bacteria (MIC: 2.5-0.009?mg/mL) than against Gram-negative bacteria (MIC: 2.5-0.165?mg/mL) were observed. The use of microtiter plates has the advantage of lower cost, fast and quantitative results.     

The potential use of electrospun polylactic acid nanofibers as alternative reinforcements in an epoxy composite system

This pilot study elaborates the development of novel epoxy/electrospun polylactic acid (PLA) nanofiber composites at the fiber contents of 3, 5, and 10 wt % to evaluate their mechanical and thermal properties using flexural tests and differential scanning calorimetry (DSC). The flexural moduli of composites increase remarkably by 50.8 and 24.0% for 5 and 10 wt % fiber contents, respectively, relative to that of neat epoxy. Furthermore, a similar trend is also shown for corresponding flexural strengths being enhanced by 31.6 and 4.8%. Fractured surface morphology with scanning electron microscopy (SEM) confirms a full permeation of cured epoxy matrix into nanofiber structures and existence of nondestructive fibrous networks inside large void cavities. The glass transition temperature (T_g) of composites increases up to 54–60 °C due to embedded electrospun nanofibers compared to 50 °C for that of epoxy, indicating that fibrous networks may further restrict the intermolecular mobility of matrix in thermal effects. © 2014 Wiley Periodicals, Inc. J. Polym. Sci., Part B: Polym. Phys. 2014 , 52, 618–623     

Krasnoselski-Mann type iterative method for hierarchical fixed point problem and split mixed equilibrium problem

In this paper, we suggest and analyze a Krasnoselski-Mann type iterative method to approximate a common element of solution sets of a hierarchical fixed point problem for nonexpansive mappings and a split mixed equilibrium problem. We prove that sequences generated by the proposed iterative method converge weakly to a common element of solution sets of these problems. Further, we derive some consequences from our main result. Furthermore, we extend the considered iterative method to a split monotone variational inclusion problem and deduce some consequences. Finally, we give a numerical example to justify the main result. The method and results presented in this paper generalize and unify the corresponding known results in this area.     

New heteroleptic palladium(II) dithiocarbamates: synthesis,characterization, packing and anticancer activity against five different cancer cell lines

Two new heteroleptic palladium(II) complexes have been synthesized by reacting equimolar quantities of palladium(II) chloride, sodium 4‐(2‐methoxyphenyl)piperazine‐1‐carbodithioate and diphenyl‐p‐tolylphosphine ( 1 ) or tri‐p‐tolylphosphine ( 2 ). Complexes 1 and 2 have been characterized using elemental analysis, Fourier transform infrared spectroscopy, multinuclear NMR (¹H, ¹³C and ³¹P) spectroscopy and single‐crystal X‐ray analysis. The latter technique confirms a pseudo square‐planar geometry in which two adjacent positions are occupied by bidentate dithiocarbamate while chloro and substituted triphenylphosphine are present at the remaining two positions. The anticancer activity of both complexes against five different cancer cell lines (LU – human lung carcinoma, established at UIC, Department of Surgical Oncology; MCF7 – human breast adenocarcinoma, ATCC number HTB‐22?; MDA‐MB‐231 – human breast adenocarcinoma, ATCC number HTB‐26?; Hepa‐1c1c7 – mouse liver hepatoma, ATCC number CRL‐2026?; PC‐3 – human prostate adenocarcinoma, ATCC number CRL‐1435?) was determined by MTT assay, revealing 2 has higher activity than 1 . A drug–calf thymus DNA binding study with UV–visible spectroscopy reveals a higher DNA binding affinity of 2 (3.511 × 10⁴ M^?1) than 1 (4.213 × 10³ M^?1). Density functional theory studies confirm the relatively more stable nature of 2 than 1 . Copyright © 2016 John Wiley & Sons, Ltd.     

A Review on Effects of Lubricant Formulations on Tribological Performance and Boundary Lubrication Mechanisms of Non-Doped DLC/DLC Contacts

Tribological efficiency of industrial applications involving boundary lubrication regime can be improved to an appreciable extent by the deposition of hard coatings on interacting surfaces. Among such coatings, diamond-like carbon (DLC) coatings are considered to be one of the most suitable ones for the said role. DLC coatings possess a unique combination of physical, chemical, and material properties due to which they can help in minimizing friction-induced energy and material losses even under starved lubrication conditions. Since commercial lubricants are optimized for steel surfaces, therefore, a lot of experimental investigations were carried out to analyze the tribological compatibility of these lubricants with various DLC coatings. However, there is still a lack of understanding about how DLC coatings interact with conventional lubricant additives. Some researchers reported tribologically beneficial interactions between DLC coatings and formulated lubricants while others observed no such behavior. To address these inconsistencies, there is a need to rearrange the published data in a more apprehensible and organized manner with a special emphasis on the mechanisms responsible for a particular tribological behavior. In this way, it can be determined whether synergistic or antagonistic correlation exists between a particular DLC-lubricant combination and research on DLC coatings can be continued in a logical way. In this article, most widely investigated non-doped DLC coatings (ta-C, a-C:H, a-C, and ta-C:H) are tribologically analyzed. Average values of friction and wear coefficients are calculated for various DLC-lubricant combinations using already published data and compared to quantify the effectiveness of a particular lubricant additive in enhancing tribological characteristics of symmetrical non-doped DLC contacts. Moreover, tribological performance parameters of non-doped DLC coatings are compared with those of doped-DLC coatings to understand differences in their tribological behavior in combination with additives.     

Sol–gel derived ZnO nanoparticulate films for ultraviolet photodetector (UV) applications

Zinc oxide nanoparticles based UV detector was fabricated on thermally oxidized silicon substrate. ZnO nanoparticle films were deposited using sol–gel route. The seed solution was prepared using two different solvents (methanol and isopropyl alcohol (IPA)). The surface morphology of the prepared films was characterized by FESEM. Structural characterization along with optical measurements was carried out using XRD and UV–vis spectroscopy. For the UV photo-detector, ZnO thin film prepared in IPA is selected based on their structural and optical analysis. The changes in photo-response of ZnO thin film with respect to time was studied under the dark and variable UV intensities. It was observed that the photocurrent increased with a factor of 4.82 under 1.16 mW of UV intensity. It is believe that the synthesized ZnO thin films have potential to use in the ultraviolet photo-detector applications.     

Structural Factors and Mechanisms Underlying the Improved Photodynamic Cell Killing with Silicon Phthalocyanine Photosensitizers Directed to Lysosomes Versus Mitochondria

The phthalocyanine photosensitizer Pc 4 has been shown to bind preferentially to mitochondrial and endoplasmic reticulum membranes. Upon photoirradiation of Pc 4-loaded cells, membrane components, especially Bcl-2, are photodamaged and apoptosis, as indicated by activation of caspase-3 and cleavage of poly(ADP-ribose) polymerase, is triggered. A series of analogs of Pc 4 were synthesized, and the results demonstrate that Pcs with the aminopropylsiloxy ligand of Pc 4 or a similar one on one side of the Pc ring and a second large axial ligand on the other side of the ring have unexpected properties, including enhanced cell uptake, greater monomerization resulting in greater intracellular fluorescence and three-fold higher affinity constants for liposomes. The hydroxyl-bearing axial ligands tend to reduce aggregation of the Pc and direct it to lysosomes, resulting in four to six times more killing of cells, as defined by loss of clonogenicity, than with Pc 4. Whereas Pc 4-PDT photodamages Bcl-2 and Bcl-xL, Pc 181-PDT causes much less photodamage to Bcl-2 over the same dose–response range relative to cell killing, with earlier cleavage of Bid and slower caspase-3-dependent apoptosis. Therefore, within this series of photosensitizers, these hydroxyl-bearing axial ligands are less aggregated than is Pc 4, tend to localize to lysosomes and are more effective in overall cell killing than is Pc 4, but induce apoptosis more slowly and by a modified pathway.     

Modified form of binary and ternary 3-point subdivision schemes

Binary 3-point scheme, developed by Hormann and Sabin [Hormann, K. and Sabin, Malcolm A., 2008, A family of subdivision schemes with cubic precision, Computer Aided Geometric Design, 25, 41-52], has been modified by introducing a tension parameter which generates a family of C¹ limiting curves for certain range of tension parameter. Ternary 3-point scheme, introduced by Siddiqi and Rehan [Siddiqi, Shahid S. and Rehan, K., 2009, A ternary three point scheme for curve designing, International Journal of Computer Mathematics, In Press, DOI: 10.1080/00207160802428220], has also been modified by introducing a tension parameter which generates family of C¹ and C² limiting curves for certain range of tension parameter. Laurent polynomial method is used to investigate the continuity of the subdivision schemes. The performance of modified schemes has been demonstrated by considering different examples along with its comparison with the established subdivision schemes.     

A systematic investigation on flavonoids,catechin, β-sitosterol and lignin glycosides from Saraca asoca (ashoka) having anti-cancer & antioxidant properties with no side effect

Saraca asoca is an IUCN red-listed tree species that extensively famous in the Ayurvedic medicine field. Saraca asoca (Roxb.) de Wilde belongs to the family Fabaceae, has been used to treat various gynecological disorders, bacterial infections, worm infestations, haemmorhagic dysentery, uterine pain, skin diseases, cancer, circulatory, cardiovascular disorders, and many others. All parts of the Saraca asoca have medicinal values. Numerous antioxidant compounds like flavonoids, catechin, beta-sitosterol, lignin glycosides are present in the bark, leaf, and flower of Saraca asoca plant, which help to stabilize free radicals molecules that are associated with the development of cancer conditions. Currently in the cancer research study field new and more effective modes of natural therapies are recently being analyzed. Traditional medicines have been used for their preventative role against various diseases in the human population. Plant based therapy for cancer prevention is becoming more demanding due to its various unique properties such as natural chemical composition, less expensiveness, naturally available., easily orally administrable, significant chemo-protective activities, nontoxic to normal cells in the body, less side effects compared to other synthetic chemotherapeutic drugs. The chemotherapeutic drugs will be harmful to both cancer and normal cells. Additionally, some common side effects or health consequences like vomiting, nausea, bleeding, hair fall, alopecia, hyperuricemia, thrombocytopenia, bone marrow depression, mucositis are very common after chemotherapeutic drug treatment in cancer. This review paper summarizes the evidences which agree with the fact that flavonoids and other phenolic compounds in Saraca asoca plant possess significant antioxidant activity and an efficient chemopreventive characteristic against different types of cancer. This paper reviews the anticancer activities of Saraca asoca bark and flower and discusses the potential preventive roles of phenolic and flavonoids compounds, present in bark and flower of Saraca asoca in the cancer treatment process.