Enhanced output voltage of nano energy harvester with diverse textiles

Abstract

We demonstrate the electrical properties of nano energy harvesters (NEHs) with various textiles for smart textiles that can be applied to the next generation wearable electronics. Output voltages and currents of NEHs with various fabrics, such as a cotton, rayon and wool that have different triboelectricity were measured. Cotton, rayon and wool shows the maximum output voltages of 1.250, 3.313 and 4.063 V, respectively. In addition, output currents of those textiles were 0.75, 4.4, 1.063 μA, respectively. Wool, in particular, which has the highest triboelectricity of 350 V exhibits the highest output voltage.     

Self‐emulsion polymerization of amphiphilic monomers—a green route to synthesis of polymeric nanoscaffolds

Self‐emulsion polymerization (SEP), a green route developed by us for the polymerization of amphiphilic monomers, does not require any emulsifier or an organic solvent except that the water‐soluble initiators such as 2,2′‐azobis[2‐(2‐imidazolin‐2‐yl)propane]dihydrochloride (VA‐044) and potassium persulfate (KPS) are only used. We report here the polymer nanoscaffolds from a number of amphiphilic monomers, which can be used for in situ encapsulation of a variety of nanoparticles. As a demonstration of the efficacy of these nanoscaffolds, the synthesis of a biocompatible hybrid nanoparticle (nanohybrid), prepared by encapsulating Fe₃O₄ magnetic nanoparticle (Fe₃O₄ MNPs) in poly(2‐hydroxyethyl methacrylate) in water, for MRI application is presented. The nanohybrid prepared following the SEP in the form of an emulsion does not involve the use of any stabilizing agent, crosslinker, polymeric emulsifier, or surfactant. This water‐soluble, spherical, and stable nanohybrid containing Fe₃O₄ MNPs of average size 10 ± 2 nm has a zeta potential value of ?41.89 mV under physiological conditions. Magnetic measurement confirmed that the nanohybrid shows typical magnetic behavior having a saturation magnetization (Ms) value of 32.3 emu/g and a transverse relaxivity (r2) value of 29.97 mM^?1 s^?1, which signifies that it can be used as a T2 contrast agent in MRI. © 2019 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2019     

Simultaneous determination of 75 abuse drugs including amphetamines,benzodiazepines, cocaine,opioids, piperazines,zolpidem and metabolites in human hair samples using liquid chromatography–tandem mass spectrometry

A liquid chromatography–tandem mass spectrometric method for the simultaneous determination of 75 abuse drugs and metabolites, including 19 benzodiazepines, 19 amphetamines, two opiates, eight opioids, cocaine, lysergic acid diethylamide, zolpidem, three piperazines and 21 metabolites in human hair samples, was developed and validated. Ten‐milligram hair samples were decontaminated, pulverized using a ball mill, extracted with 1 mL of methanol spiked with 28 deuterated internal standards in an ultrasonic bath for 60 min at 50°C, and purified with Q‐sep dispersive solid‐phase extraction tubes. The purified extracts were evaporated to dryness and the residue was dissolved in 0.1 mL of 10% methanol. The 75 analytes were analyzed on an Acquity HSS T3 column using gradient elution of methanol and 0.1% formic acid and quantified in multiple reaction monitoring mode with positive electrospray ionization. Calibration curves were linear (r ≥ 0.9951) from the lower limit of quantitation (2–200 pg/mg depending on the drug) to 2000 pg/mg. The coefficients of variation and accuracy for intra‐ and inter‐assay analysis at three QC levels were 4.3–12.9% and 89.2–109.1%, respectively. The overall mean recovery ranged from 87.1 to 105.3%. This method was successfully applied to the analysis of 11 forensic hair samples obtained from drug abusers.     

On $$\epsilon $$ ϵ -solutions for robust semi-infinite optimization problems

Positivity - In this paper, we consider semi-infinite optimization problems involving a convex objective function and infinitely many convex constraint functions with data uncertainty, and give its...     

Analysis of phantom centering positioning on image noise and radiation dose in axial scan type of brain CT

ABSTRACT

This study examined the dose and image quality according to the position change of a human phantom in a CT scan. This study used an MDCT 128 Slice CT Scanner instrument. An axial scan was performed with a 16 cm CTDI phantom of a human phantom, and the dose was measured using a pencil chamber meter. The phantom was scanned 10 cm above and below the isocenter and 15 cm above the right and left. The position of the phantom is indicated by C-0 in the isocenter position, S-10 in the upper 10 cm, I-10 in the lower 10 cm, R-15 in the right 15 cm, and L-15 in the left 15 cm. The test was performed 30 times using the brain CT protocol to calculate the dose and the dose width product (DWP). The acquired images were analyzed using the ImageJ program. Statistical analysis was performed using SPSS with one-way ANOVA (p < .05). The mean DWP values of the CT scanner were C-0 31.97 mGy·cm, S-10 24.52 mGy·cm, I-10 24.28 mGy· cm, R-15 17.95 mGy·cm, and L15 17.6 mGy·cm. Compared to the isocenter (C-0), the DLP values measured at each site were 23.3% for S-10, 24% for I-10, 43.8% for R-15, and 44.9% for L15. A significant difference in the one-way ANOVA statistical process was observed (p>0.05). C-0 was measured to be 7.42 HU, S-10 7.87 HU, I-10 8.4 HU, R-15 117 HU, and L-15 13.6 HU for evaluating the image quality. Compared to C-0, S-10 was 5.39%, I-10 was 13.2%, R-15 was 57.6%, and L-15 was 83.2%. The PSNR for S-10, I-10, R-15, and L-15 was 17.37, 17.5, 16.62, and 16.37 dB, respectively. A good quality image can be obtained by positioning the subject precisely in the isocenter in the axial scan, if possible, because the irradiated dose to the subject is low, which can lead to an increase in noise in image reconstruction.     

Protein tyrosine phosphatase 1B inhibitors from a marine-derived fungal strain aspergillus sp. SF-5929

Abstract

In the course of our continuing investigation of bioactive secondary metabolites from marine-derived fungal strains, a racemate of a novel diphenolic derivative named (±)-tylopilusin D (1) along with ten previously known secondary metabolites (2–11) were isolated from a marine-derived fungal strain Aspergillus sp. SF-5929. Their structures were elucidated mainly by analysis of NMR and MS data. In addition, the inhibitory effects of the isolated compounds against protein tyrosine phosphatase 1B (PTP1B) activity were evaluated, and compounds 1, 2, and 5–7 inhibited PTP1B activity with IC₅₀ values ranging from 3.3 to 8.1?µM. Kinetics studies suggested that compounds 1, 2, and 5 had noncompetitive inhibitory effects against PTP1B.     

Designing hierarchical NiCo2S4 nanospheres with enhanced electrochemical performance for supercapacitors

Journal of Solid State Electrochemistry - Hierarchical nanostructure materials have attracted significant attention due to their fascinating structural features for the application of...     

Co‐development of Crystalline and Mesoscopic Order in Mesostructured Zeolite Nanosheets

Mesoporous zeolites are a new and technologically important class of materials that exhibit improved diffusion and catalytic reaction properties compared to conventional zeolites with sub‐nanometer pore dimensions. During their syntheses, the transient developments of crystalline and mesoscopic order are closely coupled and challenging to control. Correlated solid‐state NMR, X‐ray, and electron microscopy analyses yield new molecular‐level insights on the interactions and distributions of complicated organic structure‐directing agents with respect to crystallizing zeolite frameworks. The analyses reveal the formation of an intermediate layered silicate phase, which subsequently transforms into zeolite nanosheets with uniform nano‐ and mesoscale porosities. Such materials result from coupled surfactant self‐assembly and inorganic crystallization processes, the interplay between which governs the onset and development of framework structural order on different length and time scales.