Surface of room temperature ionic liquid [bmim][PF6] studied by polarization- and experimental configuration-dependent sum frequency generation vibrational spectroscopy

Understanding and control of the surface properties such as molecular orientations are of great importance in numerous applications of ionic liquids. However, there remain discrepancies among the previous experimental and theoretical studies on the surface orientation and structures of room temperature ionic liquids(RTIL) systems. In this article, the orientation of 1-butyl-3-methylimidazolium([bmin]) cation at the air/liquid interface of a characteristic RTIL, 1-butyl-3-methylimidazolium hexafluorophosphate([bmim][PF6]), was investigated by the sum frequency generation vibrational spectroscopy(SFG-VS). Detailed polarization and experimental configuration analyses of the SFG-VS spectra showed the possibility of a small spectral splitting in the CH3 symmetric stretching region, which can be further attributed to the probable existence of multiple orientations for the interfacial [bmim] cations. In addition, the(N)–CH3 vibrations were absent, ruling out the prediction by several recent molecular dynamics simulations which state that portions of the [bmim] cations orient with a standing-up(N)–CH3 group at the ionic liquid surface. Hence, new realistic theoretical models have to be developed to reflect the complex nature of the ionic liquid surface.     

Ratiometric mode with dyads: a breakthrough in dynamic trapping and quantification for redox regulation in living cells

Redox-based post-translational modification of protein thiols has become an attractive strategy in cellular homeostasis and cell signaling.Due to the reductive end of the redox buffer network,the vicinal dithiol-containing proteins(VDPs)maintains an appropriate oxidation-reduction state of proteins through the reversible transformation from vicinal dithiols to disulfide,which is responsible for a variety of     

Directing the Selectivity of CO Electrolysis to Acetate by Constructing Metal-Organic Interfaces

Electrochemically converting CO₂ to valuable chemicals holds great promise for closing the anthropogenic carbon cycle. Owing to complex reaction pathways and shared rate-determining steps, directing the selectivity of CO₂/CO electrolysis to a specific multicarbon product is very challenging. We report here a strategy for highly selective production of acetate from CO electrolysis by constructing metal-organic interfaces. We demonstrate that the Cu-organic interfaces constructed by in situ reconstruction of Cu complexes show very impressive acetate selectivity, with a high Faradaic efficiency of 84.2 % and a carbon selectivity of 92.1 % for acetate production, in an alkaline membrane electrode assembly electrolyzer. The maximum acetate partial current density and acetate yield reach as high as 605 mA cm⁻² and 63.4 %, respectively. Thorough structural characterizations, control experiments, operando Raman spectroscopy measurements, and density functional theory calculation results indicate that the Cu-organic interface creates a favorable reaction microenvironment that enhances *CO adsorption, lowers the energy barrier for C−C coupling, and facilitates the formation of CH₃COOH over other multicarbon products, thus rationalizing the selective acetate production.     

各向异性本构关系在板料成形数值模拟中的应用

对几种能表达面内各向异性的屈服准则Hill、Barlat-Lian、Barlat进行了比较。以弹性变形服从各向同性广义虎克定律的情况下，给出了基于张量算法推导的弹塑性本构关系的一般表达式，并由此导出了相应屈服准则的弹塑性本构关系的显式表达。借助ABAQUS软件本构模块用户子程序接口，分别实现了这些屈服准则在ABAQUS的嵌入。以模拟方形盒的拉延过程为例，分析了不同的屈服准则在板料成形过程数值模拟中的应用。模拟结果表明，基于弹塑性本构关系一般表达所列出的相应屈服准则的显式表达式是正确的；在采用壳元来模拟板料成形时，采用Barlat准则的模拟结果和采用Barlat-Lian准则的结果差别不大。     

不同年龄段天然牙的摩擦磨损行为研究

采用往复滑动摩擦磨损试验台考察了不同年龄段的天然牙同钛合金配副时的摩擦学性能.结果表明:天然牙的摩擦磨损行为同年龄密切相关,早期和中期恒牙的摩擦磨损行为相似,磨损表面主要呈现轻微擦伤迹象,中期恒牙的抗磨性能最佳;乳牙及晚期恒牙的摩擦系数变化波动较大,抗磨性能不佳,磨损表面主要呈现严重犁削和剥落特征.     

INFLUENCE OF ASIAN DUSTS ON THE PHYSICOCHEMICAL PROPERTIES OF ATMOSPHERIC AEROSOLS IN TAIWAN DISTRICT USING THE PENGHU ISLANDS AS AN EXAMPLE

1. Introduction In the early months of each year, Asian dusts transport frequently from Northwest China and Mongolia to the Pa-cific-Rim countries (Kagawa et al., 2001; Uno et al., 2002). It causes significant environmental effects such as ambient air quality deterioration, atmospheric visibility impairment, radiation energy reduction, mineral deposition, and acid rain neutralization (Terada et al., 2002; Zhang & An, 1999). During Asian dust periods, significant increases of atmos-pheric …     

跳马项目的三维实时动态测量系统

为跳马项目研究的电测系统中引入数字信号处理的传递函数及频谱分析的方法,采集和处理了因人体冲击三维力对信号的耦合干扰造成的十分复杂的响应信号,具有较高的动态测试精度.可以获得跳马动作的全部运动生物力学参数.现已用于中国国家体操队进行计算机辅助训炼.     

La_2O_3和WSi_2增强MoSi_2基复合材料的摩擦磨损性能研究

选用MRH-5A型环-块摩擦磨损试验机测定了3种载荷和2种转速条件下La2O3和WSi2增强MoSi2基复合材料在滑动干摩擦时的摩擦磨损性能,采用扫描电子显微镜分析了复合材料磨损表面形貌.结果表明:La2O3和WSi2增强MoSi2基复合材料的抗磨性能优于MoSi2及WSi2/MoSi2材料;当载荷与速度乘积(pv)值小于183.04N·m/s时,La2O3和WSi2增强MoSi2基复合材料的磨损质量损失仅为相同条件下MoSi2的1/4～1/6和WSi2/MoSi2的1/2;这是由于La2O3和WSi2复合增强相存在硬化和韧化协同作用所致;随着pv值增加,La2O3和WSi2增强MoSi2基复合材料依次呈现犁削、粘着磨损和疲劳磨损特征.     

中心裂纹圆盘应力强度因子的测试误差分析

本文在中心裂纹圆盘应力强度因子解析解的基础上,利用一阶微分法则,给出了与裂纹相对长度和加载角相关的应力强度因子(K 和K )的4个误差传递函数。这4个误差传递函数关于裂纹相对长度和加载角均是非线性的,它们既是误差分析的基础,又是合理确定裂纹相对长度和加载角的基础。分析结果表明,加载角的误差Δθ除了对纯 型K 的误差几乎没有影响,对纯 型K 影响较小外,对复合型K 、K 的误差均有较大影响。最后,本文建议裂纹相对长度的取值范围为0.4～0.6;还建议在复合型断裂试验时,必须依据对K 、K 的总体精度要求来严格控制加载角的精度。     

EFFECTS OF FINELY DISPERSED METALLIC PALLADIUM ON MICROSTRUCTURE AND PROPERTIES OF NANOCOMPOSITES PRODUCED BY SOL-GEL TECHNIQUE

Nanosized palladium particles were incorporated into mesoporous silica matrix to obtain nanocomposites using the sol-gel technique. Effects of the finely dispersed metallic palladium on the microstructure and properties of the nanocomposites were investigated. By means of X-ray diffraction and optical absorption, it was found that palladium particles were 5-9 nm in diameter and their uniform dispersion in the mesoporous silica depended on both the content of the palladium and the structural features of the silica matrix. The results showed that the mixing method of preparation led to wider size distribution of the nanosized particles as compared to the immersion method, but dispersed degree was reduced. Although the incorporation of nanosized palladium particles could not substantially induce significant structural changes of the matrix, the apparent red-shifted optical absorptions for the nanocomposites were observed as compared to the parent monolithic silica, particularly with increase in palladium loading and calcination temperature.