Darstellung,Eigenschaften und Kristallstruktur von Bis(phthalocyaninato)cer(IV)

Preparation, Properties and Crystal Structure of Bis(phthalocyaninato)cerium(IV) The anodic or chemical oxidation with dibenzoylperoxide of solutions of bis(phthalocyaninato)cerate(III) in dichloromethane yields selectively sparely soluble bis(phthalocyaninato)cerium(IV), [Ce(Pc(2-)) 2 ]. Green, monoclinic needles cristallize with a = 18.783(12) Å b = 18.739(16) Å c= 15.618(10) Å ß114.30(7)°; Z = 4; space group C2/c. [Ce(Pc(2–)) 2 ] is a sandwich complex in which the cerium Atom is eightfold coordinated by the isoindole nitrogens of the two staggered convex Pc-rings. The u.v.-vis., m.i.r., f.i.r. and resonance Raman spectra are consistent with the structure.     

Joule-Thomson inversion curve prediction by using equation of state

In this paper five equations of state are tested for checking their ability to predict the Joule-Thomson inversion curve.These five equations of state are:Mohsennia-Modarres-Mansoori(MMM),Ji-Lemp(JL),modified Soave-Redlich-Kwang(SRK)equation of state by Graboski(MSRK1),modified SRK equation of state by Peneloux and Rauzy(MSRK2),and modified Peng-Robinson (PR)equation of state by Rauzy(PRmr).The investigated equations of state give good prediction of the low-temperature branch of the inversion curve,except for MMM equation of state.The high-temperature branch and the peak of the inversion curve have been observed,in general,to be sensitive to the applied equation of state.The values of the maximum inversion temperature and maximum inversion pressure are calculated for each component used in this work.     

Spectrophotometric reaction rate method for the determination of molybdenum by its catalytic effect on the oxidation of pyrogallol red with hydrogen peroxide

A kinetic spectrophotometric method for the determination of molybdenum is based on its catalytic effect on the oxidation of pyrogallol red with hydrogen peroxide. The decrease of the absorbance of pyrogallol red in the presence of hydrogen peroxide with time from 0.5 to 4.5 min is proportional to the concentration of Mo(VI) over the range 0.010–0.500 μg/mL. The limit of detection is 0.008 μg Mo/mL. The precision and the effect of the presence of more than forty ions on the molybdenum determination are reported. Probable interferences are completely removed by a cation exchange resin. The procedure was successfully applied to the determination of molybdenum in plant materials and steels. Received: 28 April 1997 / Revised: 16 June 1997 / Accepted: 18 June 1997     

Flow injection analysis of sulphite by gas-phase molecular absorption UV/VIS spectrophotometry

A flow injection gas-phase molecular absorption spectrophotometric method is described for the determination of sulphite in aqueous solution. The sulphite solution, 200 microl, is introduced into a stream of distilled water. The carrier stream containing a sulphite zone is reacted, in the first mixing coil, with a stream of sulphuric acid (1 M). The evolved sulphur dioxide is purged to the segments of nitrogen flow through the second mixing coil. The gaseous phase is separated from the liquid stream by the use of a purpose built gas-liquid separator and then is swept into a purpose built flow-through cell. The absorbance of the gaseous phase is measured at 200 nm using a UV/VIS spectrophotometer. Up to 440 microg of sulphite is determined. The limit of detection is 0.8 microg and the R.D.S. for the determination of 70 and 220 microg of sulphite are 1.02 and 0.76%, respectively. Up to 40 samples h(-1) can be analyzed. The effect of several anions and cations on the determination of sulphite was studied and the results showed that the method is relatively free from interferences. The proposed method was applied to the determination of sulphite in a synthetic sample, water sample and lemon juice.     

Spektroskopische Eigenschaften von Di(phthalocyaninato)metallaten(III) der Seltenen Erden. Teil 2: Die Multikern(1H-, 13C-, 15N-, 17O- und 31P)-NMR-Spektren und Nachweis komplexgebundenen Wassers

Spectroscopical Properties of Di(phthalocyaninato)metalates(III) of the Rare Earth Elements. Part 2: The Multinuclear (¹H, ¹³C, ¹⁵N, ¹⁷O, and ³¹P) NMR Spectra and Determination of Complex Bound Water The ¹H, ¹³C, ¹⁵N, ¹⁷O and ³¹P NMR spectra of (PNP)[Ln(Pc^2?)₂] and (TDOA)[Ln(Pc^2?)₂] (Ln = La …? (—Pm) …? Lu); PNP: di(triphenylphosphine)-iminium; TDOA: Tri(n-dodecyl)n-octylammonium dissolved in CD₂Cl₂ are reported. With the exception of the nitrogen atoms of the cations all light atoms of both homologues complex salt rows have been detected and assigned. Proof of the presence of additional water contained in the (solid) complex salts has been given unambigously. The otherwise strong Fermi contact interactions diminuish rapidly with growing distance from the paramagnetic centre favouring dipolar (pseudo-contact) interactions. As a consequence the mostly element independent paramagnetic shifts of the atoms situated on the periphery of the anion as well as those of the cations and water are determined by the distance factor. Therefore a first glance of the structure of the ion-pair present in solution emerges, in which the water molecule seems to play an important role.     

Prediction of Solubility Parameters Based on the Explicit Expression of Statistical Thermodynamics

A robust and efficient procedure is presented for calculating the solubility parameter. An analytical equation for internal pressure is proposed. Through a simple relation reported by Verdier and Andersen (fluid phase equilibrium 231: 125–137, 2005), one can easily find the solubility parameter via our analytical equation for the internal pressure. Also, the radial distribution function (RDF) of a Lennard–Jones LJ (12, 6) fluid, proposed by Xu and Hu (fluid phase equilibrium 30: 221–228, 1986), has been employed to calculate the internal pressure of normal alkanes from methane to decane. Their solubility parameters were evaluated according to the calculated values of the internal pressure. A comparison between the experimental and the estimated values demonstrated a very good agreement between them.     

Polyelectrolyte Nanocomposite Membranes Using Imidazole-Functionalized Nanosilica for Fuel Cell Applications

The preparation and characterization of a new type of nanocomposite polyelectrolyte membrane, based on DuPont Nafion/imidazole-modified nanosilica (Im-Si), for direct methanol fuel cell applications is described. Related to the interactions between the protonated imidazole groups, grafted on the surface of nanosilica, and negatively charged sulfonic acid groups of Nafion, new electrostatic interactions can be formed in the interface of Nafion and Im-Si which result in both lower methanol permeability and also higher proton conductivity. Physical characteristics of these manufactured nanocomposite membranes were investigated by scanning electron microscopy, thermogravimetry analysis, differential scanning calorimetry, Fourier transform infrared spectroscopy, water uptake, methanol permeability, and ion-exchange capacity, as well as proton conductivity. The Nafion/Im-Si membranes showed higher proton conductivity, lower methanol permeability and, as a consequence, higher selectivity parameter in comparison to the neat Nafion or Nafion/silica membranes. The obtained results indicated that the Nafion/Im-Si membranes could be utilized as promising polyelectrolyte membranes for direct methanol fuel cell applications.     

Switching adaptive controllers to control fractional‐order complex systems with unknown structure and input nonlinearities

This article investigates the chaos control problem for the fractional‐order chaotic systems containing unknown structure and input nonlinearities. Two types of nonlinearity in the control input are considered. In the first case, a general continuous nonlinearity input is supposed in the controller, and in the second case, the unknown dead‐zone input is included. In each case, a proper switching adaptive controller is introduced to stabilize the fractional‐order chaotic system in the presence of unknown parameters and uncertainties. The control methods are designed based on the boundedness property of the chaotic system's states, where, in the proposed methods the nonlinear/linear dynamic terms of the fractional‐order chaotic systems are assumed to be fully unknown. The analytical results of the mentioned techniques are proved by the stability analysis theorem of fractional‐order systems and the adaptive control method. In addition, as an application of the proposed methods, single input adaptive controllers are adopted for control of a class of three‐dimensional nonlinear fractional‐order chaotic systems. And finally, some numerical examples illustrate the correctness of the analytical results. © 2014 Wiley Periodicals, Inc. Complexity 21: 211–223, 2015     

Comparison of the role of new ethers and conventional alkoxysilanes as external donors in the polymerization of propylene using the industrial Ziegler-Natta catalyst

Two new ethers were synthesized using the Williamson reaction from related alcohols and were used as external donors in propylene polymerization in the presence of the industrial diisobutyl phthalate-based MgCl₂-supported Ziegler-Natta catalyst. For comparison the propylene polymerization was carried out in the presence of silane and in the absence of external donors. The produced polymers were characterized by differential scanning calorimetry, xylene extraction, melt flow index, scanning electron microscopy and gel permeation chromatography. The isotacticity, molecular weight and molecular weight distribution, melt flow index, crystallinity degree and thermal properties of polypropylenes were influenced by the type of external donors.     

Cyclometalated organoplatinum(II) complexes: first example of a monodentate benzo[h]quinolyl ligand and a complex with bridging bis(diphenylphosphino)ethane

The cyclometalated complexes [Pt(ppy)R(SMe(2))] or [Pt(bhq)R(SMe(2))], where ppyH = 2-phenylpyridine, bhqH = benzo[h]quinoline and R = methyl or p-tolyl, react with bis(diphenylphosphino)ethane, dppe, in a 1:1 ratio to give the corresponding complexes [Pt(κ(1)-C-ppy)R(dppe)] or [Pt(κ(1)-C-bhq)R(dppe)], in which the ppy or bhq ligands are monodentate and dppe is chelating. The similar reaction in a 2:1 ratio gives the binuclear complexes [{Pt(ppy)R}(2)(μ-dppe)] or [{Pt(bhq)R}(2)(μ-dppe)], in which the dppe ligands are in the unusual bridging bidentate bonding mode.