Catalytic partial oxidation of methane using RhSr- and Ni-substituted hexaaluminates

This paper reports the results of experimental and modeling efforts to characterize partial oxidation of methane to produce synthesis gas (H₂ and CO) using metal-substituted hexaaluminate catalysts in short-contact-time reactors. Hexaaluminate catalysts offer excellent high-temperature stability compared to the equivalent metal-based catalysts. The hexaaluminates are synthesized by a metal-exchange process using alumoxane precursors that enable a wide range of metal substitutions. Of all the combinations tested, RhSr-substituted hexaaluminates yielded the best performance. The catalysts are supported on alumina porous-foam structures, which are positioned within a tube furnace to control the operating temperature. Two-stage combinations of RhSr- and Ni-substituted hexaaluminates are shown to improve conversion activity and selectivity compared to a single-catalyst system.     

High mobility of dithiophene-tetrathiafulvalene single-crystal organic field effect transistors

Single-crystal field effect transistors of the organic semiconductor dithiophene-tetrathiafulvalene (DT-TTF) were prepared by drop casting. Long, thin crystals connected two microfabricated gold electrodes, and a silicon substrate was used as a back gate. The highest hole mobility observed was 1.4 cm2/Vs, which is the highest reported for an organic semiconductor not based on pentacene. A high ON/OFF ratio of at least 7 x 105 was obtained for this device.     

Enantiospecific analysis by capillary electrophoresis: applications in drug metabolism and pharmacokinetics

Enantiospecific analysis has an important role in drug metabolism and pharmacokinetic investigations and its now no longer acceptable to determine total drug, or metabolite, concentrations following the administration of a racemate. Inspite of the fact that capillary electrophoresis (CE) has become an essential technique in pharmaceutical and enantiospecific analysis, the chromatographic methodologies remain the most commonly used approach for the determination of the enantiomeric composition of drugs in biological fluids. The application of CE to bioanalysis has been slow, which is in part associated with the complexity of biological matrices together with the relatively poor concentration limits of detection achievable. However, as a result of its versatility, high separation efficiency, minimal sample requirements, speed of analysis and low consumable expense CE is likely to play an increasingly significant role in the area. This review present an overview of enantiospecific CE in bioanalysis in which the approaches to enantiomeric resolution and the problems associated with biological matrices are briefly discussed. The application of enantiospecific CE to samples of biological origin is illustrated using examples where the methodology has either solved an analytical problem, or provided a useful alternative to the currently available chromatographic methods. Such improvements in methodology are associated with either the high separation efficiency and/or microanalytical capabilities of the technique. Enantiospecific CE will not replace the chromatographic methodologies but does provide the bioanalyst with a useful addition to his armamentarium.     

Heterogeneous binding of lipoteichoic acid to the surface of titanium dioxide as determined with 31P solid-state NMR spectroscopy

The adsorption of lipoteichoic acid onto the surface of titanium dioxide is shown to be heterogeneous. 31P CPMAS solid-state NMR reveals two distinct phosphate species. The chemical shift anisotropy, asymmetry parameter, and rotating-frame spin-lattice relaxation suggest that 50% of the phosphates are bound to the surface. The remaining phosphates also exhibit restricted molecular motion, but do not have a direct surface bond.     

Bragg fiber design for linear polarization

A new design is presented for Bragg fibers that allows low-loss propagation for linearly polarized light. Predictions based on a simple ray model show that approximately doubling the thickness of the first wall layer results in low losses at TM-like boundaries while keeping TE-like boundary losses manageable. This contrasts sharply with conventional quarter-wave designs that are extremely low loss for TE01 modes but very high loss for linear polarization. We fabricate Bragg fibers based on this design concept in a Si/SiO2 system and verify experimentally that they propagate linearly polarized light with losses less than 6 dB/cm over a 60-nm spectral range.     

Extending the GGobi pipeline from R

This paper describes progress towards developing a platform for rapid prototyping of interactive data visualizations, using R, GGobi, rggobi and RGtk2. GGobi is a software tool for multivariate interactive graphics. At the core of GGobi is a data pipeline that incrementally transforms data through a series of stages into a plot and maps user interaction with the plot back to the data. The GGobi pipeline is extensible and mutable at runtime. The rggobi package, an interface from the R language to GGobi, has been augmented with a low-level interface that supports the customization of interactive data visualizations through the extension and manipulation of the GGobi pipeline. The large size of the GGobi API has motivated the use of the RGtk2 code generation system to create the low-level interface between R and GGobi. The software is demonstrated through an application to interactive network visualization.