Solar dryers as a promising drying technology: a comprehensive review

Journal of Thermal Analysis and Calorimetry - Dryers are utilized in food industry and agriculture in order to extend the useful lifespan of corps. Thermal energy is required for water removal in...     

Chromatographic determination of sulfasalazine and its active metabolites: greenness assessment and application to spiked human plasma

Green TLC-densitometric and RP-HPLC methods were developed and validated for the determination of the active prodrug sulfasalazine (SZ), its active metabolite mesalazine (MZ) and the major active metabolite of mesalazine, N-acetyl-5-aminosalicylic acid (AS). In the developed TLC-densitometric method, chromatographic separation was carried out on TLC silica gel plates 60 F₂₅₄ using a developing system consisting of ethyl acetate–methanol–ammonia solution 33% (8:2.5:0.3, by volume) and then scanning the separated bands at 215 nm using hydrochlorothiazide as an internal standard with linearity ranges of 0.4–3, 0.4–2.4 and 0.3–2 for SZ, MZ and AS, respectively. The developed RP-HPLC method depended on chromatographic separation using a C₁₈ column with a solvent mixture of methanol–aqueous acetic acid solution (pH 5) as a mobile phase with gradient elution mode and UV scanning at 243 nm using pyrazinamide as internal standard with linearity ranges of 5–50, 5–40, and 3–20 for SZ, MZ and AS, respectively. US Food and Drug Administration guidelines were followed during validation of the methods. The greenness of the developed methods was estimated using the greenness profile and the Eco-Scale approach. Both methods passed the four quadrants of the greenness profile and had Eco-Scale score ˃75, thus they were considered to be green according to these approaches.     

Isolated resonances and nonlinear damping

We analyze isolated resonance curves (IRCs) in single-degree-of-freedom systems possessing nonlinear damping. Through the combination of singularity theory and the averaging method, the onset and merging of IRCs, which coincide to isola and simple bifurcation singularities, respectively, can be analytically predicted. Numerical simulations confirm the accuracy of the analytical developments. Another important finding of this paper is that we unveil a geometrical connection between the topology of the damping force and IRCs. Specifically, we demonstrate that extremas and zeros of the damping force correspond to the appearance and merging of IRCs. Considering a damping force possessing several minima and maxima confirms the general validity of the analytical result. It also evidences a very complex scenario for which different IRCs are created, co-exist and then merge together to form a super IRC which eventually merges with the main resonance peak.     

Performance evaluation of praseodymium doped fiber amplifiers

Optical Review - In this paper, we report the performance evaluation of praseodymium doped fiber amplifier (PDFA) operating in 1.25–1.35 μm band of wavelengths based on...     

Green micellar stability-indicating high-performance liquid chromatography method for determination of rupatadine fumarate in the presence of its main impurity desloratadine: Oxidative degradation kinetics study

A green micellar stability-indicating high-performance liquid chromatography method was developed for rupatadine fumarate determination in existence with its main impurity desloratadine. Separation was attained using Hypersil ODS column (150 × 4.6 mm, 5 μm), the micellar mobile phase consisted of 0.13 M sodium dodecyl sulfate, 0.1 M disodium hydrogen phosphate adjusted by phosphoric acid to pH 2.8 and 10% n-butanol. The column was maintained at 45^◦C and detection was carried out at 267 nm. A linear response was achieved over the range of 2–160 μg/ml for rupatadine and 0.4–8 μg/ml for desloratadine. The method was applied for rupatadine determination in alergoliber tablets and alergoliber syrup without the interference of methyl paraben and propyl paraben present as main excipients. Rupatadine fumarate revealed pronounced susceptibility to oxidation; further study of oxidative degradation kinetics was carried out. Rupatadine was found to follow pseudo-first-order kinetics when exposed to 10% H₂O₂ at 60 and 80°C and the activation energy was found to be 15.69 Kcal/mol. At a lower temperature (40°C), degradation kinetics regression was best fitted as a polynomial quadratic relationship, thus rupatadine oxidation at a lower temperature tends to adopt a second-order kinetics rate. Oxidative degradation product structure was revealed using infrared and found to be rupatadine N-oxide at all temperature values.     

Ornamental Plant Efficiency for Heavy Metals Phytoextraction from Contaminated Soils Amended with Organic Materials

Accumulation of heavy metals (HMs) by ornamental plants (OPs) from contaminated agriculture soils is a unique technique that can efficiently reduce the metal load in the food chain. Amaranthus tricolor L. has attractive characteristics acquiring a higher growth rate and large biomass when grown at heavy metal contaminated soils. Site-specific detailed information is not available on the use of A. tricolor plant in metal phytoremediation from the polluted sites. The study aimed to enhance the uptake of HMs (Pb, Zn, and Cu) via amending poultry litter extract (PLE), vinasse sugarcane (VSC), and humic acid (HA) as natural mobilized organic materials compared to ethylene diamine tetraacetic acid (EDTA), as a common mobilized chemical agent by A. tricolor plant. The studied soils collected from Helwan, El-Gabal El-Asfar (Cairo Governorate), Arab El-Madabeg (Assiut Governorate), Egypt, and study have been conducted under pot condition. Our results revealed all organic materials in all studied soils, except EDTA in EL-Gabal El-Asfar soil, significantly increased the dry weight of the A. tricolor plant compared to the control treatment. The uptake of Pb and Zn significantly (p > 0.05) increased due to applying all organic materials to the studied soils. HA application caused the highest uptake as shown in Pb concentration by more than 5 times in Helwan soil and EDTA by 65% in El-Gabal El-Asfar soil while VSC increased it by 110% in El-Madabeg soil. Also, an increase in Zn concentration due to EDTA application was 58, 42, and 56% for Helwan, El-Gabal El-Asfar, and El-Madabeg soil, respectively. In all studied soils, the application of organic materials increased the remediation factor (RF) than the control. El-Madabeg soil treated with vinasse sugarcane gave the highest RF values; 6.40, 3.26, and 4.02% for Pb, Zn, and Cu, respectively, than the control. Thus, we identified A. tricolor as a successful ornamental candidate that, along with organic mobilization amendments, most efficiently develop soil health, reduce metal toxicity, and recommend remediation of heavy metal-contaminated soils. Additionally, long-term application of organic mobilization amendments and continued growth of A. tricolor under field conditions could be recommended for future directions to confirm the results.     

Flow field and thermal characteristics in a model of a tangentially fired furnace under different conditions of burner tripping

Tangentially fired furnaces are vortex-combustion units and are widely used in steam generators of industrial plants. The present study provides a numerical investigation of the problem of turbulent reacting flows in a model furnace of a tangentially fired boiler. The importance of this problem is mainly due to its relation to large boiler furnaces used in thermal power plants. In the present work, calculation of the flow field, temperature and species concentration-contour maps in a tangentially-fired model furnace are provided. The safety of these furnaces requires that the burner be tripped (its fuel is cut off) if the flame is extinguished. Therefore, the present work provides an investigation of the influence of number of tripped burners on the characteristics of the flow and thermal fields. The details of the flow, thermal and combustion fields are obtained from the solution of the conservation equations of mass, momentum and energy and transport equations for scalar variables in addition to the equations of the turbulence model. Available experimental measurements were used for validating the calculation procedure. The results show that the vortex created due to pressure gradient at the furnace center only influenced by tripping at least two burners. However, the temperature distributions are significantly distorted by tripping any of the burners. Regions of very high temperature close to the furnace walls appear as a result of tripping the fuel in one or two of the burners. Calculated heat flux along the furnace walls are presented.     

Complete Asymptotic Expansions of Solutions of the System of Elastostatics in the Presence of an Inclusion of Small Diameter and Detection of an Inclusion

We consider the system of elastostatics for an elastic medium consisting of an imperfection of small diameter, embedded in a homogeneous reference medium. The Lamé constants of the imperfection are different from those of the background medium. We establish a complete asymptotic formula for the displacement vector in terms of the reference Lamé constants, the location of the imperfection and its geometry. Our derivation is rigorous, and based on layer potential techniques. The asymptotic expansions in this paper are valid for an elastic imperfection with Lipschitz boundaries. In the course of derivation of the asymptotic formula, we introduce the concept of (generalized) elastic moment tensors (Pólya–Szegö tensor) and prove that the first order elastic moment tensor is symmetric and positive (negative)-definite. We also obtain estimation of its eigenvalue. We then apply these asymptotic formulas for the purpose of identifying with high precision the order of magnitude of the diameter of the elastic inclusion, its location, and its elastic moment tensors.     

Comportements compares des sols et des roches

Résumé Les sols et les roches sont des corps dont le comportement rhéologique est régi par les liaisons de contact entre les éléments qui les constituent. On peut schématiser ces structures en disant que dans les sols, les contacts sont ponctuels entre les grains alors qu'ils ont lieu sur les surfaces que forment les fissures entre les blocs pour les massifs rocheux. Au cours des déformations qui précèdent la rupture, des glissements se produisent le long de surfaces irrégulières et les mouvements sont accompagnés d'une variation de volume, qui est positive pour les roches et les sables denses, et négative pour les sables lâches et la plupart des argiles. Les roches présentent un effet d'échelle: les caractéristiques mécaniques de la rupture sont des fonctions décroissantes de la dimension de la zone soumise aux contraintes et ceci est lié à l'hétérogénéité de la fissuration. Cet effet n'apparaît pas dans les sols, mais dans un champ de contraintes hétérogène, comme celui qui existe sous un poinçon, un phénomène analogue se produit pour les sables denses. On peut l'expliquer par l'hétérogénéité introduite dans le milieu par la création d'une ligne de glissement isolée.

---

Summary Rheological behaviour of soils and rocks is determined by contact forces between constitutive elements. For soils, the contacts are punctual. For rocks they occur along the surfaces of cracks or joints. During the deformation before the failure, sliding movements occur along irregularly shaped surfaces with a volume change, which is positive for rocks and dense sands, negative for loose sands and most of clays. Size effect in rocks is due to cracks heterogeneity: mechanical characteristics at failure decrease with increasing size of specimens. This effect does not exist in soils, but in a heterogeneous stress field a similar phenomenon appears in dense sands. It is connected with the heterogeneity induced by the creation of an isolated slip line.

---

---

Avec 9 figures