Measurement of microchannel fluidic resistance with a standard voltage meter

A simplified method for measuring the fluidic resistance (R_fluidic) of microfluidic channels is presented, in which the electrical resistance (R_elec) of a channel filled with a conductivity standard solution can be measured and directly correlated to R_fluidic using a simple equation. Although a slight correction factor could be applied in this system to improve accuracy, results showed that a standard voltage meter could be used without calibration to determine R_fluidic to within 12% error. Results accurate to within 2% were obtained when a geometric correction factor was applied using these particular channels. When compared to standard flow rate measurements, such as meniscus tracking in outlet tubing, this approach provided a more straightforward alternative and resulted in lower measurement error. The method was validated using 9 different fluidic resistance values (from ∼40 to 600 kPa s mm⁻³) and over 30 separately fabricated microfluidic devices. Furthermore, since the method is analogous to resistance measurements with a voltage meter in electrical circuits, dynamic R_fluidic measurements were possible in more complex microfluidic designs. Microchannel R_elec was shown to dynamically mimic pressure waveforms applied to a membrane in a variable microfluidic resistor. The variable resistor was then used to dynamically control aqueous-in-oil droplet sizes and spacing, providing a unique and convenient control system for droplet-generating devices. This conductivity-based method for fluidic resistance measurement is thus a useful tool for static or real-time characterization of microfluidic systems.     

Some aspects of stabilization and degradation of nigerian natural rubber. I. Photostabilization of natural rubber with bound di-tert-butyl-4-hydroxybenzyl thioglycollate (dbhbt)

3,5-Di-tert-butyl-4-hydroxybenzyl thioglycollate (DBHBT) has been reacted with Nigerian Natural rubber latex at 65 ± 1°C using 4,4-azobiscyanovaleric (AZBN) acid-ferrous sulfate redox system to obtain a binding efficiency of 13%. The bound DBHBT was investigated as a UV stabilizer in unprocessed and unvulcanized rubber using spectroscopic method. With respect to the C? O index, the masterbatch diluted to 56% gave the optimum activity and higher concentrations showed significant pro-oxidant activity. The C? C bonds in particular, showed greater stability which is a function of DBHBT concentration. The methylenic and the allylic hydrogen atoms, the most susceptible, and probably the sites of the primary attack, were not protected by DBHBT.     

Activity of Compounds from Temperate Propolis against Trypanosoma brucei and Leishmania mexicana

Ethanolic extracts of samples of temperate zone propolis, four from the UK and one from Poland, were tested against three Trypanosoma brucei strains and displayed EC₅₀ values < 20 µg/mL. The extracts were fractionated, from which 12 compounds and one two-component mixture were isolated, and characterized by NMR and high-resolution mass spectrometry, as 3-acetoxypinobanksin, tectochrysin, kaempferol, pinocembrin, 4′-methoxykaempferol, galangin, chrysin, apigenin, pinostrobin, cinnamic acid, coumaric acid, cinnamyl ester/coumaric acid benzyl ester (mixture), 4′,7-dimethoxykaempferol, and naringenin 4′,7-dimethyl ether. The isolated compounds were tested against drug-sensitive and drug-resistant strains of T. brucei and Leishmania mexicana, with the highest activities ≤ 15 µM. The most active compounds against T. brucei were naringenin 4′,7 dimethyl ether and 4′methoxy kaempferol with activity of 15–20 µM against the three T. brucei strains. The most active compounds against L. mexicana were 4′,7-dimethoxykaempferol and the coumaric acid ester mixture, with EC₅₀ values of 12.9 ± 3.7 µM and 13.1 ± 1.0 µM. No loss of activity was found with the diamidine- and arsenical-resistant or phenanthridine-resistant T. brucei strains, or the miltefosine-resistant L. mexicana strain; no clear structure activity relationship was observed for the isolated compounds. Temperate propolis yields multiple compounds with anti-kinetoplastid activity.     

Perturbed Markov Chains with Damping Component

The paper is devoted to studies of regularly and singularly perturbed Markov chains with damping component. In such models, a matrix of transition probabilities is regularised by adding a special damping matrix multiplied by a small damping (perturbation) parameter ε. We perform a detailed perturbation analysis for such Markov chains, particularly, give effective upper bounds for the rate of approximation for stationary distributions of unperturbed Markov chains by stationary distributions of perturbed Markov chains with regularised matrices of transition probabilities, asymptotic expansions for approximating stationary distributions with respect to damping parameter, explicit coupling type upper bounds for the rate of convergence in ergodic theorems for n-step transition probabilities, as well as ergodic theorems in triangular array mode.

     

A Simulation Study of Due-date Assignment Rules in a Dynamic Job Shop

This paper is a report of a simulation study that investigates a dynamic approach to scheduling jobs in a multi-machine job shop. The workload information of a job is used in different forms to evaluate the shop performance based on three measures: mean job lateness, percentage of tardy jobs and lateness variance. Different combinations of due-date assignment methods and sequencing rules are compared based on specific performance criteria. The results indicate that using the cumulative distribution function of workload information can yield a better performance than using a proportional function of workload information or ignoring shop congestion information. A few situations are identified in which workload information is not critical.     

Application of organoclays for the adsorption of recalcitrant organic molecules from aqueous media

Water purification is imperative for the welfare of a healthy population. Water is widely contaminated by recalcitrant organic chemicals such a pesticides, herbicides and hormones. One inexpensive method for purifying water from these types of molecules is through adsorption. One suite of materials for this adsorption is based upon organoclays. This paper reviews the adsorption of organics on organoclays.     

Electron transfer at tetrahedral cobalt(II). Part II‡. Kinetics of silver(I) ion catalysed reduction of peroxodisulphate

Transition Metal Chemistry - The kinetics of the silver(I) ion catalysed reduction of peroxodisulphate by 12-tungstocobaltate(II) anion in aqueous HC1O4 has been studied. Although the reaction in...