Heat Transport in Unsaturated Zone Thermal Energy Storage – Analysis with Two-Phase and Single-Phase Models

We analyze a field experiment where ambient air is injected into the soil during the summer and extracted again during the winter. A multiphase model accounting for the conductive transport as well as the convective transport with the moving liquid and gas phases is used along with a more simplified single-phase model where the convective transport is due to the gas alone. The latter model also accounts for subzero wintertime temperatures. The multiphase model captures well both the seasonal variations and the actual test sequence, the main calibration being in the adjustment of medium permeabilities based on the observed pressure responses. The effect of the injection pump on the temperature and humidity of the injection air needs to be known accurately. Taking into account the humidity of the injection air explicitly instead of using humidity-corrected enthalpy values also has an effect. The effect of various humidity and specific enthalpy assumptions is of the order of 1–1.5°C, while ignoring the wintertime subzero temperatures has an effect of 1–2°C. These differences are of the same order of magnitude as the heterogeneity-introduced differences in field data. Using the simplified single-phase model typically appears to cause a difference of 1–2°C, but can yield an even higher deviation of the order of 3–4°C.     

A One‐Pot Synthesis of N‐Aryl‐2‐Oxazolidinones and Cyclic Urethanes by the Lewis Base Catalyzed Fixation of Carbon Dioxide into Anilines and Bromoalkanes

The multicomponent assembly of pharmaceutically relevant N‐aryl‐oxazolidinones through the direct insertion of carbon dioxide into readily available anilines and dibromoalkanes is described. The addition of catalytic amounts of an organosuperbase such as Barton's base enables this transformation to proceed with high yields and exquisite substrate functional‐group tolerance under ambient CO₂ pressure and mild temperature. This report also provides the first proof‐of‐principle for the single‐operation synthesis of elusive seven‐membered ring cyclic urethanes.     

Alnumycins A2 and A3: new inverse-epimeric pairs stereoisomeric to alnumycin A1

Two new pairs of stereoisomeric alnumycin As, A2 {(2)-(1R,1′RS,4′SR,5′SR)} and A3 {(2)-(1R,1′RS,4′SR,5′RS)}, are described. Similar to alnumycin A1 {(2)-(1R,1′RS,4′RS,5′SR)}, each of these naturally occurring compounds is also a pair of C-1 inverse epimers. The relative configurations of the dioxane ring sidechains were assigned on the basis of ¹H NMR NOE contacts and molecular modeling using density functional theory (DFT) at the M06-2X/6-31G(d) level of theory. The absolute configurations of C-1 and the determination of inverse epimeric relationships were achieved by experimental electronic circular dichroism (ECD) measurements, with both aspects confirmed by using the chiral derivatizing agent (CDA) Mosher′s acid chloride {α-methoxy-α-trifluorophenylacetyl chloride (MTPACl)} to effect enantiodifferentiation. The absolute configurations of the dioxane ring using the CDA could only be effected in the case of alnumycin A1, the results of which were in agreement with previous assignments. The dioxane ring conformational mobility and the likely interaction between the MTPA groups coupled with the structural novelty of the diols in the dioxane ring with respect to CDA analysis precluded an absolute configuration assignment for alnumycins A2 and A3 based on empirical comparisons or by computational analysis of through-space NMR shieldings (TSNMRS) emanating from the phenyl groups of the MTPA moieties.     

On applicability of PCA,voxel-wise variance normalization and dimensionality assumptions for sliding temporal window sICA in resting-state fMRI

Subject-level resting-state fMRI (RS-fMRI) spatial independent component analysis (sICA) may provide new ways to analyze the data when performed in the sliding time window. However, whether principal component analysis (PCA) and voxel-wise variance normalization (VN) are applicable pre-processing procedures in the sliding-window context, as they are for regular sICA, has not been addressed so far. Also model order selection requires further studies concerning sliding-window sICA. In this paper we have addressed these concerns. First, we compared PCA-retained subspaces concerning overlapping parts of consecutive temporal windows to answer whether in-window PCA and VN can confound comparisons between sICA analyses in consecutive windows. Second, we compared the PCA subspaces between windowed and full data to assess expected comparability between windowed and full-data sICA results. Third, temporal evolution of dimensionality estimates in RS-fMRI data sets was monitored to identify potential challenges in model order selection in a sliding-window sICA context. Our results illustrate that in-window VN can be safely used, in-window PCA is applicable with most window widths and that comparisons between windowed and full data should not be performed from a subspace similarity point of view. In addition, our studies on dimensionality estimates demonstrated that there are sustained, periodic and very case-specific changes in signal-to-noise ratio within RS-fMRI data sets. Consequently, dimensionality estimation is needed for well-founded model order determination in the sliding-window case. The observed periodic changes correspond to a frequency band of ≤ 0.1 Hz, which is commonly associated with brain activity in RS-fMRI and become on average most pronounced at window widths of 80 and 60 time points (144 and 108 s, respectively). Wider windows provided only slightly better comparability between consecutive windows, and 60 time point or shorter windows also provided the best comparability with full-data results. Further studies are needed to determine the cause for dimensionality variations.     

On the importance of behavioral operational research: The case of understanding and communicating about dynamic systems

We point out the need for Behavioral Operational Research (BOR) in advancing the practice of OR. So far, in OR behavioral phenomena have been acknowledged only in behavioral decision theory but behavioral issues are always present when supporting human problem solving by modeling. Behavioral effects can relate to the group interaction and communication when facilitating with OR models as well as to the possibility of procedural mistakes and cognitive biases. As an illustrative example we use well known system dynamics studies related to the understanding of accumulation. We show that one gets completely opposite results depending on the way the phenomenon is described and how the questions are phrased and graphs used. The results suggest that OR processes are highly sensitive to various behavioral effects. As a result, we need to pay attention to the way we communicate about models as they are being increasingly used in addressing important problems like climate change.     

Direct Photocatalysis for Organic Synthesis by Using Plasmonic‐Metal Nanoparticles Irradiated with Visible Light

Recent advances in direct‐use plasmonic‐metal nanoparticles (NPs) as photocatalysts to drive organic synthesis reactions under visible‐light irradiation have attracted great interest. Plasmonic‐metal NPs are characterized by their strong interaction with visible light through excitation of the localized surface plasmon resonance (LSPR). Herein, we review recent developments in direct photocatalysis using plasmonic‐metal NPs and their applications. We focus on the role played by the LSPR of the metal NPs in catalyzing organic transformations and, more broadly, the role that light irradiation plays in catalyzing the reactions. Through this, the reaction mechanisms that these light‐excited energetic electrons promote will be highlighted. This review will be of particular interest to researchers who are designing and fabricating new plasmonic‐metal NP photocatalysts by identifying important reaction mechanisms that occur through light irradiation.     

Multivariate Association of Graph-Theoretic Variables and Physicochemical Properties

Abstract

We used canonical correlation analysis to examine the multivariate association between two distinct data sets commonly measured or calculated for approximately 600 chemicals: (1) measured or calculated values of select physieochemical properties (i.e., K _ow, boiling point, heat of vaporization, molecular weight, water solubility, molecular volume, hydrogen bonding potential, and vapor pressure) and (2) calculated algorithmically-derived variables (i.e., topological and neighborhood indices derived from graph theory). Canonical correlation analysis identified eight highly significant associations between linear combinations of graph-theoretic variables and linear combinations of physicochemical properties. The set of graph theoretic variables was significantly related to all physieochemical properties, explaining 55% to 99% of the variation in these properties.     

Direct Evidence of Significantly Different Chemical Behavior and Excited‐State Dynamics of 1,7‐ and 1,6‐Regioisomers of Pyrrolidinyl‐Substituted Perylene Diimide

Novel bay‐functionalized perylene diimides with additional substitution sites close to the perylene core have been prepared by the reaction between 1,7(6)‐dibromoperylene diimide 6 (dibromo‐PDI) and 2‐(benzyloxymethyl)pyrrolidine 5 . Distinct differences in the chemical behaviors of the 1,7‐ and 1,6‐regioisomers have been discerned. While the 1,6‐dibromo‐PDI produced the corresponding 1,6‐bis‐substituted derivative more efficiently, the 1,7‐dibromo‐PDI underwent predominant mono‐debromination, yielding a mono‐substituted PDI along with a small amount of the corresponding 1,7‐bis‐substituted compound. By varying the reaction conditions, a controlled stepwise bis‐substitution of the bromo substituents was also achieved, allowing the direct synthesis of asymmetrical 1,6‐ and 1,7‐PDIs. The compounds were isolated as individual regioisomers. Fullerene (C₆₀) was then covalently linked at the bay region of the newly prepared PDIs. In this way, two separate sets of perylene diimide–fullerene dyads, namely single‐bridged (SB‐1,7‐PDI‐C₆₀ and SB‐1,6‐PDI‐C₆₀) and double‐bridged (DB‐1,7‐PDI‐C₆₀ and DB‐1,6‐PDI‐C₆₀), were synthesized. The fullerene was intentionally attached at the bay region of the PDI to achieve close proximity of the two chromophores and to ensure an efficient photoinduced electron transfer. A detailed study of the photodynamics has revealed that photoinduced electron transfer from the perylene diimide chromophore to the fullerene occurs in all four dyads in polar benzonitrile, and also occurs in the single‐bridged dyads in nonpolar toluene. The process was found to be substantially faster and more efficient in the dyads containing the 1,7‐regioisomer, both for the singly‐ and double‐bridged molecules. In the case of the single‐bridged dyads, SB‐1,7‐PDI‐C₆₀ and SB‐1,6‐PDI‐C₆₀, different relaxation pathways of their charge‐separated states have been discovered. To the best of our knowledge, this is the first observation of photoinduced electron transfer in PDI‐C₆₀ dyads in a nonpolar medium.     

Mode-locked semiconductor disk lasers with weakly saturated absorbers

The effect of absorber saturation on pulse shaping was studied both numerically and experimentally in a semiconductor disk laser. It was found that steady-state mode locking can be achieved even with very weak saturation of the absorber when the pulse energy is well below the saturation energy of absorption. The study discloses for the first time the direct impact of absorber modulation depth on the pulse width. Numerical analysis confirms that partial bleaching of absorption is adequate for formation of stable mode locking in SDLs. The fast gain dynamics of the semiconductor medium approach the dynamics of a slow gain medium at low pulse energies and high repetition rates with a pulse period much shorter than the gain recovery time. The presented results are of practical importance for multigigahertz repetition rate lasers, indicating that sufficient pulse shaping can occur when the saturable absorber is not fully bleached.