IR spectroscopic studies on the transmission of substituent effects to carbonyl and thiocarbonyl stretching frequencies in 4-substituted phenyl-4,5-dihydrobenzo [f] [1,4] oxazepin-3 (2H)-ones (thiones)

Single and dual substituent correlation analysis were applied to study transmission of substituent effects on IR carbonyl and thiocarbonyl stretching frequencies of 4-substituted phenyl-4,5-dihydrobenzo [f] [1,4] oxazepin-3 (2H)-ones (5a–n) and -thiones (6a–n). The substituent effects were estimated on the basis of results of the statistical analysis. The differences among the regression coefficients were discussed in terms of the relative importance of the substituent field and resonance effects. For a better understanding of the results, density functional theory (DFT) calculations were performed to determine the preferred geometry and to calculate the theoretical carbonyl and thiocarbonyl stretching frequencies.     

Role of electrolyte pH on structural and magnetic properties of Co–Fe films

Co–Fe films were electrodeposited on polycrystalline Titanium substrates from the electrolytes with different pH levels. X-ray diffraction (XRD) was used to study the crystal structure of the films. The XRD patterns showed that the films grown at the pH levels of 3.70 and 3.30 have a mixed phase consisting of face-centred cubic (fcc) and body-centred cubic, while those grown at pH=2.90 have only fcc structure. It was observed that the film composition, by energy dispersive x-ray spectroscopy, contain around 88 at% Co and 12 at% Fe for all films investigated in this study. Morphological observations indicated that all films have grainy structure with the slight change of grain size depending on the electrolyte pH. Magnetoresistance measurements, made at room temperature, showed that all films exhibited anisotropic magnetoresistance, which is affected by the electrolyte pH. From the magnetic measurements made by vibrating sample magnetometer, the saturation magnetization increases as the electrolyte pH decreases. Furthermore, all films have in-plane easy-axis direction of magnetization.     

Contribution of electrolyte pH and deposition potentials to the magnetic anisotropy of electrodeposited nickel films

The influence of electrolyte pH and cathode potential on the magnetic properties of single layer Nickel films electrodeposited on polycrystalline titanium substrates was studied. The films were deposited at the electrolyte pH=3.5±0.1, 2.5±0.1 and 2.1±0.1 by varying the deposition potentials (?1.2, ?1.5 and ?1.8 V vs saturated calomel electrode, SCE) applied in continuous waveform. The structural analysis by X-ray diffraction revealed that the films have face-centred cubic structure. Results of the magnetic measurements obtained by vibrating sample magnetometer (VSM) indicated that the magnetic properties were affected by the electrolyte pH and the cathode potentials in terms of magnetic anisotropy. At the highest pH the films deposited at the lowest potential had in-plane magnetic anisotropy. As the electrolyte pH decreased from the high (pH=3.5±0.1) to low (pH=2.5±0.1), which is aided by increasing the potentials, resulted in an almost magnetic isotropy in the films. However, isotropic magnetic behaviour was observed for the film deposited at the low pH combined with the high potential (?1.8 V vs SCE). Magnetic thickness profile of the samples obtained by VSM revealed that the isotropic films have a smoother magnetic variation across the film from one edge than the anisotropic ones. This is also verified with a microscopic observation by an optical microscope and the surface of the isotropic films is observed to be smoother than that of the anisotropic ones. Furthermore, all films were found to have planar magnetic anisotropy irrespective of the pH’s and the potentials.     

The effect of B2O3 addition to the microstructure and magnetic properties of Ni0.4Zn0.6Fe2O4 ferrite

The effects of 0.01 and 0.1 mol B₂O₃ addition to the microstructure and magnetic properties of a Ni–Zn ferrite composition expressed by a molecular formula of Ni_0.4Zn_0.6Fe₂O₄ were investigated. The toroid-shaped samples prepared by pressing the milled raw materials used in the preparation of the composition were sintered in the range of 1000–1300 °C. The addition of 0.01 mol B₂O₃ increased the grain growth and densification giving rise to reduced intergranular and intragranular porosity due to liquid-phase sintering. The sintered toroid sample at 1300 °C gave the optimum magnetic properties of B_r=170 mT, H_c=0.025 kA/m and a high initial permeability value of μ_i=4000. The increment of the B₂O₃ content to 0.1 mol resulted in a pronounced grain growth and also gave rise to large porosity due to the evaporation of B₂O₃ at higher sintering temperatures. Hence, it resulted in an air-gap effect in the hysteresis curves of these samples.     

Annealing effects on structural, optical and electrical properties of e-beam evaporated CuIn0.5Ga0.5Te2 thin films

CuIn_0.5Ga_0.5Te₂ (CIGT) thin films have been prepared by e-beam evaporation from a single crystal powder synthesized by direct reaction of constituent elements in a stoichiometric proportion. Post-depositional annealing has been carried out at 300 and 350 °C. The compositions of the films were determined by energy dispersive X-ray analysis (EDXA) and it was found that there was a remarkable fluctuation in atomic percentage of the constituent elements following to the post-depositional annealing. X-ray diffraction analysis (XRD) has shown that as-grown films were amorphous in nature and turned into polycrystalline structure following to the annealing at 300 °C. The main peaks of CuIn_0.5Ga_0.5Te₂ and some minor peaks belonged to a binary phase Cu₂Te appeared after annealing at 300 °C, whereas for the films annealed at 350 °C single phase of the CuIn_0.5Ga_0.5Te₂ chalcopyrite structure was observed with the preferred orientation along the (1 1 2) plane. The effect of annealing on and near surface regions has been studied using X-ray photoelectron spectroscopy (XPS). The results indicated that there was a considerable variation in surface composition following to the annealing process. The transmission and reflection measurements have been carried out in the wavelength range of 200-1100 nm. The absorption coefficients of the films were found to be in the order of 10⁴ cm⁻¹ and optical band gaps were determined as 1.39, 1.43 and 1.47 eV for as-grown and films annealed at 300 and 350 °C, respectively. The temperature dependent conductivity and photoconductivity measurements have been performed in the temperature range of −73 to 157 °C and the room temperature resistivities were found to be around 3.4 × 10⁷ and 9.6 × 10⁶ (Ω cm) for the as-grown and annealed films at 350 °C, respectively.     

Effects of annealing on structural and morphological properties of e-beam evaporated AgGaSe2 thin films

Polycrystalline AgGaSe₂ thin films were deposited by using single crystalline powder of AgGaSe₂ grown by vertical Bridgman-Stockbarger technique. Post-annealing effect on the structural and morphological properties of the deposited films were studied by means of X-ray diffraction (XRD), X-ray photoelectron spectroscopy (XPS) and scanning electron microscopy (SEM) with energy dispersive X-ray analysis (EDXA) measurements. XRD analysis showed that as-grown films were in amorphous structure, whereas annealing between 300 and 600 °C resulted in polycrystalline structure. At low annealing temperature, they were composed of Ag, Ga₂Se₃, GaSe, and AgGaSe₂ phases but with increasing annealing temperature AgGaSe₂ was becoming the dominant phase. In the as-grown form, the film surface had large agglomerations of Ag as determined by EDXA analysis and they disappeared because of the triggered segregation of constituent elements with increasing annealing temperature. Detail analyses of chemical composition and bonding nature of the films were carried out by XPS survey. The phases of AgO, Ag, Ag₂Se, AgGaSe₂, Ga, Ga₂O₃, Ga₂Se₃, Se and SeO₂ were identified at the surface (or near the surface) of AgGaSe₂ thin films depending on the annealing temperature, and considerable changes in the phases were observed.     

Observation of the suppression of the flux of cosmic rays above 4 x 10 (19) eV

The energy spectrum of cosmic rays above 2.5 x 10;{18} eV, derived from 20,000 events recorded at the Pierre Auger Observatory, is described. The spectral index gamma of the particle flux, J proportional, variantE;{-gamma}, at energies between 4 x 10;{18} eV and 4 x 10;{19} eV is 2.69+/-0.02(stat)+/-0.06(syst), steepening to 4.2+/-0.4(stat)+/-0.06(syst) at higher energies. The hypothesis of a single power law is rejected with a significance greater than 6 standard deviations. The data are consistent with the prediction by Greisen and by Zatsepin and Kuz'min.     

Upper limit on the diffuse flux of ultrahigh energy tau neutrinos from the Pierre Auger Observatory

The surface detector array of the Pierre Auger Observatory is sensitive to Earth-skimming tau neutrinos that interact in Earth's crust. Tau leptons from nu(tau) charged-current interactions can emerge and decay in the atmosphere to produce a nearly horizontal shower with a significant electromagnetic component. The data collected between 1 January 2004 and 31 August 2007 are used to place an upper limit on the diffuse flux of nu(tau) at EeV energies. Assuming an E(nu)(-2) differential energy spectrum the limit set at 90% C.L. is E(nu)(2)dN(nu)(tau)/dE(nu)<1.3 x 10(-7) GeV cm(-2) s(-1) sr(-1) in the energy range 2 x 10(17) eV< E(nu)< 2 x 10(19) eV.