Ag纳米颗粒表面等离子体共振增强DSSC电池的制备及性能研究

使用水热法制备了一系列不同含量Ag纳米颗粒掺杂的Ag-TiO2复合光阳极的染料敏化太阳能电池,同时,研究了不同含量Ag纳米颗粒掺杂对染料敏化太阳能电池的结构和性能的影响.实验结果表明：Ag的掺入增强了吸附在Ag-TiO2复合光阳极上的染料对光的吸收,显著地提高了对应电池的短路电流.在Ag掺入量为0.20%的时候,对应的电池具有最佳的性能,其短路电流为10.66mA/cm2,开路电压Voc为697mV,光电转换效率为5.59%,显著优于纯TiO2光阳极电池的效率.其性能的改善主要归因于掺入Ag纳米颗粒的表面等离子体共振吸收效应使电池光阳极对光的吸收增强所致.     

Ho掺杂的BiFeO_3多铁陶瓷的制备及性能

用固相反应和快速退火冷却法制备了纯的BiFeO_3(BFO)陶瓷和15%Ho掺杂的Bi_(0.85)Ho_(0.15)FeO_3(BHFO)陶瓷,研究了室温下陶瓷的品格结构及其铁电、介电、漏电和磁性能.结果表明,Ho掺杂有助于减少BiFeO_3陶瓷中的杂相,改善其铁电、介电、漏电和磁性能.与BFO陶瓷相比,BHFO陶瓷具有典型的电滞回线;当电场强度为1 50 kV/cm时,其2Pr(剩余极化值)为15 μC/cm~2.同时,BHFO具有比BFO显著增大的介电常数和明显降低的介电损耗.磁性能测试表明,BHFO陶瓷表现出弱的铁磁性.     

Voltage control of ferromagnetic resonance and spin waves

The voltage control of magnetism has attracted intensive attention owing to the abundant physical phenomena associated with magnetoelectric coupling. More importantly, the techniques to electrically manipulate spin dynamics, such as magnetic anisotropy and ferromagnetic resonance, are of great significance because of their potential applications in high-density memory devices, microwave signal processors, and magnetic sensors. Recently, voltage control of spin waves has also been demonstrated in several multiferroic heterostructures. This development provides new platforms for energyefficient, tunable magnonic devices. In this review, we focus on the most recent advances in voltage control of ferromagnetic resonance and spin waves in magnetoelectric materials and discuss the physical mechanisms and prospects for practical device applications.     

乙酸除铋火试金法测定粗铋中的金银含量

建立了用乙酸分离粗铋中铋-火试金重量法测定粗铋中金和银含量的方法。首先把粗铋焙烧氧化,然后用乙酸溶解粗铋的氧化物,过滤除去铋,消除铋对火试金法的干扰,将沉淀物灰化后,配料、高温熔融,熔态的金属铅捕集试样中的贵金属形成铅扣,将铅扣灰吹,得到金银合粒,用硝酸溶解分离金,用重量法测定金含量。方法准确度高,精密度好,金的加标回收率为99.2%～101%,银的加标回收率为98.2%～99.7%。能很好地满足粗铋中金、银的测定。     

Ba掺杂多铁BiFeO_3陶瓷的制备及性能

采用固相法成功地制备出了Ba掺杂多铁BiFeO3(BFO)的Bi1-x Bax FeO3(x=0.1,0.15,0.2,0.3)陶瓷,研究了Ba掺杂含量对陶瓷结构、铁电、漏电以及磁性的影响,制得的陶瓷为菱形扭曲的钙钛矿结构,属于R3c空间群,Ba掺杂含量较高时会转变为赝立方结构;随着Ba掺杂含量的升高,铁电电滞回线的矩形度变好,漏电流密度减小.当x=0.3时,电滞回线的矩形度最好,漏电流密度最小,其值为8×10-6 A/cm2,与纯相BFO陶瓷相比,下降了两个数量级.磁性测试表明,Bi1-x Bax FeO3陶瓷具有饱和的磁滞回线,随Ba掺杂浓度的增加,其剩余磁性经历了一个先增大后下降的过程,其最大剩余磁化强度可达9emu/g.Ba掺杂显著地改善了BFO陶瓷的铁电性和磁性.     

多铁复合纳米陶瓷BaTiO3-CoFe2O4的制备及性能研究

采用溶胶-凝胶法和化学共沉淀法制备了BaTiO3-CoFe2O4两相复合纳米粉体,利用固态烧结法制备出BaTiO3-CoFe2O4多铁性复合陶瓷.XRD测试和实验结果表明,两相复合陶瓷中同时含有四方相的BaTiO3陶瓷和立方相的CoFe2O4陶瓷.复合纳米陶瓷具有较好的铁电性和铁磁性,为进一步研究其磁电耦合效应及应用奠定了良好的基础.     

Effect of Cu doping on the secondary electron yield of carbon films on Ag-plated aluminum alloy

Reducing the secondary electron yield (SEY) of Ag-plated aluminum alloy is important for high-power microwave components. In this work, Cu doped carbon films are prepared and the secondary electron emission characteristics are studied systematically. The secondary electron coefficient δ_max of carbon films increases with the Cu contents increasing at first, and then decreases to 1.53 at a high doping ratio of 0.645. From the viewpoint of surface structure, the higher the content of Cu is, the rougher the surface is, since more cluster particles appear on the surface due to the small solid solubility of Cu in the amorphous carbon network. However, from viewpoint of the electronic structure, the reduction of the sp² hybrid bonds will increase the SEY effect as the content of Cu increases, due to the decreasing probability of collision with free electrons. Thus, the two mechanisms would compete and coexist to affect the SEY characteristics in Cu doped carbon films.     

多铁性磁电器件研究进展

多铁性材料可以实现力、电、磁等多物理场之间的相互耦合,在小尺寸、快速响应和低功耗的磁电器件领域具有重要的应用前景.在应用需求的推动下,以具有磁电耦合效应的多铁性材料为基础的磁电器件在设计、微纳加工和性能优化等方面的研究取得了持续的进展.本文简要介绍了基于磁电耦合效应的几种原型器件的最新进展,包括可调谐电感、滤波器、磁电存储器、能量回收器、磁电传感器和磁电天线等,分析总结了各种磁电器件的工作原理及其性能表现,讨论了当前多铁性磁电器件研究所面临的问题和挑战,并提出了改进磁电器件性能的研究方向.