Capillary electrophoresis-acid barrage stacking online enrichment method for highly sensitive determination of four isoflavones

A capillary electrophoresis-acid barrage stacking online enrichment method has been established to detect the four isoflavones which are Daidzein, Genistein, Formononetin, and Biochanin A. The proposed method was optimized using a single factor alternative method, and the optimal conditions obtained from the optimization were: the BGE was 25 mM borax and 2 mM β-cyclodextrin, the applied separation voltage was 20 kV, and the detection wavelength was 260 nm. The time ratio of the injection of sample and the injection of acid was 150 s:20 s, and the acid used was 250 mM acetic acid. The sample solvent used was 60% v/v acetonitrile. The established method had the enrichment factor of these four isoflavones at 24.5, 32.0, 29.2, and 33.7, respectively, LOD and LOQ are as low as nanograms per milliliter. Finally, the CE-acid barrage stacking method was successfully applied to the determination of four isoflavones in rat plasma and red clover extract, verifying the applicability and feasibility of the method.     

Eco-friendly and low-cost amidoxime-functionalized microcrystalline cellulose/mesoporous silica composite for the selective adsorption of U(VI) from aqueous solution

Journal of Radioanalytical and Nuclear Chemistry - Eco-friendly and low-cost composite, amidoxime-functionalized microcrystalline cellulose/mesoporous silica (MCC/MS-AO), were synthesized by...     

The catalytic performance study of polymerized ionic liquid synthesized in different conditions on alkylation of o‐Xylene with styrene

In this work, a series of novel acidic polymerized ionic liquids were used as heterogeneous catalyst for alkylation of o‐Xylene with styrene. And the effect of the amount of initiator and the type of acid used for ion exchange on catalyst structure and the catalytic performance of catalysts for alkylation were studied thoroughly. The experiment results show: when the percentage of the amount of initiator in the total material is 3%, the polymerized ionic liquid catalyst MPM‐SO₃H‐[C₃V][SO₃CF₃] has the most uniform with a specific surface area of 97.30 m²/g and a pore volume of 0.35 cm³/g. Benefiting from the unique structure features, MPM‐SO₃H‐[C₃V][SO₃CF₃] manifested an excellent catalytic performance for alkylation of o‐Xylene with styrene, along with the conversion of styrene was 96.8% and the yield of 1‐Phenyl‐1‐ortho‐xylene ethane was 94.7%. Therefore, this work provides a novel reference to the synthesis of polymerized ionic liquids and clearly explains the advantage of novel acidic polymerized ionic liquids on alkylation.     

电泳法制备的致密氧化锡薄膜及其在高稳定性钙钛矿太阳能电池中的应用

在平面型钙钛矿太阳能电池中常采用SnO₂作为电子传输层材料,相应的SnO₂薄膜常采用溶液旋涂法制备。但是由于前驱液中的纳米颗粒可能会发生部分团聚、基底和溶液难以完全避免灰尘等杂质颗粒混入,且最佳的SnO₂电子传输层的厚度通常仅有约20 nm,所以这种方法制备的电子传输层难以保证严格致密和无纳米针孔。在本工作中,我们报道了一种电泳沉积制备致密SnO₂薄膜的方法,并用其有效地提高了钙钛矿太阳能电池的光电转换效率和工况稳定性。通过电泳法,表面带负电荷的SnO₂纳米颗粒在电场的作用下沉积到氧化铟锡(ITO)阳极表面,这种方法得到的薄膜比旋涂法制备的更为致密。将其应用于n-i-p结构的钙钛矿太阳能电池中,能够使得暗电流降低并抑制载流子的非辐射复合,从而提高电池的短路电流和开路电压,进而实现更高的光电转换效率(从18.17%提高到19.52%),且能消除迟滞效应。更重要的是,长期工况稳定性测试表明基于电泳-旋涂法制备的器件在1个太阳的光照下、最大功率点处连续工作960 h后,仍然能够保持71%的初始效率;然而基于旋涂法制备的器件在工作100 h后即降低到初始效率的70%。本工作提供了一种全新的SnO₂电子传输层的制备方法,显著地提高了器件性能和工况稳定性,后续有望应用于制备大面积器件和电池模组。     

粉喷桩单桩承载力确定方法的比较

粉喷桩在高速公路软土地基处理中得到了广泛的应用,但其承载力的合理确定是工程实际中关心的一个重要问题。通过对工程中常用的几种粉喷桩单桩承载力确定方法的比较,分析了各自存在的问题和适用条件,提出了在实际工程应用中确定水泥搅拌桩单桩承载力的选用建议。     

Global continuum of positive solutions for discrete <Emphasis Type="Italic">p</Emphasis>-Laplacian eigenvalue problems

We discuss the discrete p-Laplacian eigenvalue problem,

$$\left\{ \begin{gathered} \Delta (\phi _p (\Delta u(k - 1))) + \lambda a(k)g(u(k)) = 0,k \in \{ 1,2,...,T\} , \hfill \\ u(0) = u(T + 1) = 0, \hfill \\ \end{gathered} \right.$$

where T > 1 is a given positive integer and φ _p (x):= |x| ^p?2 x, p > 1. First, the existence of an unbounded continuum C of positive solutions emanating from (λ, u) = (0, 0) is shown under suitable conditions on the nonlinearity. Then, under an additional condition, it is shown that the positive solution is unique for any λ > 0 and all solutions are ordered. Thus the continuum C is a monotone continuous curve globally defined for all λ > 0.

     

THE LINEAR BI-SPATIAL TENSOR EQUATIONφijAiXBj= C

A linear bi-spatial tensor equation which contains many often encountered equations as particular cases is thoroughly studied. Explicit solutions are obtained. No conditions on eigenvalues of coefficient tensors are imposed.     

基于土质边坡塑性极限分析条分法的可靠度计算方法研究

从土塑性极限分析上限定理出发,以土质边坡塑性极限分析条分法为基础,在引入可靠性分析方法(JC法)后,建立了土质边坡塑性极限分析条分法可靠度极限状态方程,并推导得到了塑性极限分析条分法可靠度计算公式。这种方法实现了定值计算向不确定性计算的转变,同时可靠度指标β的计算结果具有概率的意义。     

具有半边裂纹导电薄板放电瞬间的温度场数值模拟

采用数值模拟方法 ,模拟计算了具有半边裂纹的导电薄板在放电瞬间的温度场分布。计算结果表明 :在裂纹尖端附近由于电磁热的集中效应 ,可使材料熔化形成焊口 ,裂纹尖端处的曲率半径显著增大 ,并且焊口的温度分布与形状是不完全对称的。裂纹尖端焊口形状的模拟计算结果与试验结果非常吻合。从温度梯度的分布结果可知 ,裂纹前缘附近在放电过程中将产生很大的压应力 ,可显著减少甚至是消除裂纹前缘处的扩展应力数值 ,抑制了裂纹主干线的形成 ,可达到遏制裂纹扩展的目的     

西安地铁二号线沿线地裂缝未来位错量估算及工程分级

地裂缝在地铁设计使用期内的最大垂直位错量是西安地铁二号线穿越地裂缝结构设计的一个十分重要的参数。本文以历史水准监测资料为基础,分析了西安地铁二号线沿线各地裂缝在不同历史阶段的活动特征与活动原因,对各地裂缝的未来活动趋势进行了预测。然后通过基于不同时间段地裂缝活动速率的最大垂直位错量估算结果的对比分析,得出了地铁设计使用期内各条地裂缝与地铁交汇点处地裂缝的最大垂直位错量,并以此为依据,将西安地铁二号线沿线地裂缝分为Ⅰ、Ⅱ、Ⅲ和Ⅳ级等4个工程级别。