Controlled Reduction of Carboxamides to Alcohols or Amines by Zinc Hydrides

New protocols for controlled reduction of carboxamides to either alcohols or amines were established using a combination of sodium hydride (NaH) and zinc halides (ZnX₂). Use of a different halide on ZnX₂ dictates the selectivity, wherein the NaH‐ZnI₂ system delivers alcohols and NaH‐ZnCl₂ gives amines. Extensive mechanistic studies by experimental and theoretical approaches imply that polymeric zinc hydride (ZnH₂)_∞ is responsible for alcohol formation, whereas dimeric zinc chloride hydride (H?Zn?Cl)₂ is the key species for the production of amines.     

受限亚音速气流中倒置悬臂壁板静气弹稳定性的理论及实验研究

板壳结构在航空航天、高速列车、能量采集等诸多工程领域已经得到了广泛应用. 将悬臂壁板倒置于轴向气流中并在壁板周围流场中设置刚性壁面可有效地调控壁板的失稳速度, 是俘能器优化设计的重要措施之一. 但针对刚性壁面作用下亚音速气流中倒置悬臂壁板的失稳机制仍需要开展深入研究. 本文以受限亚音速气流中倒置的二维悬臂壁板为对象, 以理论分析及风洞实验为手段, 研究了单侧刚性壁面效应对倒置悬臂壁板静态失稳特性的影响规律. 在理论分析中, 首先应用镜像函数法来处理壁面约束条件, 基于算子理论研究获得了以Possio积分方程为表征的壁板气动力, 壁面效应实际表征为一包含移位Tricomi算子的复合算子; 然后将壁板失稳方程的求解问题转化为定区间上的函数逼近问题; 最后, 依据Wererstrass定理并利用最小二乘法求解该最优函数, 以获得系统的失稳临界参数. 在试验研究中依据压杆稳定原理设计了壁板静态失稳的测试方法并完成了风洞实验. 理论分析结果表明, 壁板会发生发散(静气动弹性)失稳, 临界动压随壁板与壁面间距的增加而增大并最终趋于稳定(无壁面情况); 通过理论与风洞实验结果的对比分析, 验证了本文气动力及理论分析的适用性及准确性. 针对倒置悬臂壁板结构的气动弹性失稳问题, 本文提出的方法不涉及系统方程的离散及特征值求解问题, 而是将其转化为了定区间上的函数逼近问题进行求解, 这为弹性结构静气动弹性失稳问题的研究提供了一个可行的新思路.      

Solar-Driven CO2 Conversion via Optimized Photothermal Catalysis in a Lotus Pod Structure

Photothermal CO₂ reduction is one of the most promising routes to efficiently utilize solar energy for fuel production at high rates. However, this reaction is currently limited by underdeveloped catalysts with low photothermal conversion efficiency, insufficient exposure of active sites, low active material loading, and high material cost. Herein, we report a potassium-modified carbon-supported cobalt (K⁺−Co−C) catalyst mimicking the structure of a lotus pod that addresses these challenges. As a result of the designed lotus-pod structure which features an efficient photothermal C substrate with hierarchical pores, an intimate Co/C interface with covalent bonding, and exposed Co catalytic sites with optimized CO binding strength, the K⁺−Co−C catalyst shows a record-high photothermal CO₂ hydrogenation rate of 758 mmol g_cat⁻¹ h⁻¹ (2871 mmol g_Co⁻¹ h⁻¹) with a 99.8 % selectivity for CO, three orders of magnitude higher than typical photochemical CO₂ reduction reactions. We further demonstrate with this catalyst effective CO₂ conversion under natural sunlight one hour before sunset during the winter season, putting forward an important step towards practical solar fuel production.     

A Highly Efficient All‐Solid‐State Lithium/Electrolyte Interface Induced by an Energetic Reaction

The energetic chemical reaction between Zn(NO₃)₂ and Li is used to create a solid‐state interface between Li metal and Li_6.4La₃Zr_1.4Ta_0.6O₁₂ (LLZTO) electrolyte. This interlayer, composed of Zn, ZnLi_x alloy, Li₃N, Li₂O, and other species, possesses strong affinities with both Li metal and LLZTO and affords highly efficient conductive pathways for Li⁺ transport through the interface. The unique structure and properties of the interlayer lead to Li metal anodes with longer cycle life, higher efficiency, and better safety compared to the current best Li metal electrodes operating in liquid electrolytes while retaining comparable capacity, rate, and overpotential. All‐solid‐state Li||Li cells can operate at very demanding current–capacity conditions of 4 mA cm^?2–8 mAh cm^?2. Thousands of hours of continuous cycling are achieved at Coulombic efficiency >99.5 % without dendrite formation or side reactions with the electrolyte.     

Influence of thermal annealing duration of buffer layer on the crystalline quality of In0.82Ga0.18As grown on InP substrate by LP-MOCVD

In_0.82Ga_0.18As epilayers were grown on InP substrates using a two-step growth technique by LP-MOCVD. A homogeneous low-temperature (450 °C) In_0.82Ga_0.18As buffer layer was introduced to improve the crystalline quality of epilayers. The influence of low-temperature buffer layer deposition condition, such as thermal annealing duration, on the crystalline quality of the In_0.82Ga_0.18As epilayer was investigated. Double-crystal X-ray diffraction measurement, Hall measurement, and Raman scattering spectrum were used to evaluate the In_0.82Ga_0.18As epilayers. Atomic force microscope was used to study the surface morphology. It is found that the In_0.82Ga_0.18As epilayer, with buffer layer thermal annealing for 5 min, exhibits the best crystalline quality. The change of the surface morphology of the buffer layer after thermal annealing treatment was suggested to explain the phenomenon.     

Nonlinear flutter of a two-dimension thin plate subjected to aerodynamic heating by differential quadrature method

The problem of nonlinear aerothermoelasticity of a two-dimension thin plate in supersonic airflow is examined. The strain-displacement relation of the von Karman＇s large deflection theory is employed to describe the geometric non-linearity and the aerodynamic piston theory is employed to account for the effects of the aerodynamic force. A new method, the differential quadrature method （DQM）, is used to obtain the discrete form of the motion equations. Then the Runge-Kutta numerical method is applied to solve the nonlinear equations and the nonlinear response of the plate is obtained numerically. The results indicate that due to the aerodynamic heating, the plate stability is degenerated, and in a specific region of system parameters the chaos motion occurs, and the route to chaos motion is via doubling-period bifurcations.     

CHAOTIC MOTIONS AND LIMIT CYCLE FLUTTER OF TWO-DIMENSIONAL WING IN SUPERSONIC FLOW

Based on the piston theory of supersonic flow and the energy method, the flutter motion equations of a two-dimensional wing with cubic stiffness in the pitching direction are established. The aeroelastic system contains both structural and aerodynamic nonlinearities. Hopf bifurcation theory is used to analyze the flutter speed of the system. The effects of system parameters on the flutter speed are studied. The 4th order Runge-Kutta method is used to calculate the stable limit cycle responses and chaotic motions of the aeroelastic system. Results show that the number and the stability of equilibrium points of the system vary with the increase of flow speed. Besides the simple limit cycle response of period 1, there are also period-doubling responses and chaotic motions in the flutter system. The route leading to chaos in the aeroelastic model used here is the period-doubling bifurcation. The chaotic motions in the system occur only when the flow speed is higher than the linear divergent speed and the initial condition is very small. Moreover, the flow speed regions in which the system behaves chaos axe very narrow.     

Reservoir Pore Structure Classification Technology of Carbonate Rock Based on NMR T 2 Spectrum Decomposition

The carbonate reservoir has a number of properties such as multi-type pore space, strong heterogeneity, and complex pore structure, which make the classification of reservoir pore structure extremely difficult. According to nuclear magnetic resonance (NMR) T ₂ spectrum characteristics of carbonate rock, an automatic pore structure classification and discrimination method based on the T ₂ spectrum decomposition is proposed. The objective function is constructed based on the multi-variate Gaussian distribution properties of the NMR T ₂ spectrum. The particle swarm optimization algorithm was used to solve the objective function and get the initial values and then the generalized reduced gradient algorithm was proposed for solving the objective function, which ensured the stability and convergence of the solution. Based on the featured parameters of the Gaussian function such as normalized weights, spectrum peaks and standard deviations, the combinatory spectrum parameters (by multiplying peak value and normalized weight for every peak) are constructed. According to the principle of fuzzy clustering, the carbonate rock pore structure is classified automatically and the discrimination function of each pore structure type is obtained using Fisher discrimination analysis. The classification results were analyzed with the corresponding casting thin section and scanning electron microscopy. The study shows that the type of the pore structure based on the NMR T ₂ spectrum decomposition is strongly consistent with other methods, which provides a good basis for the quantitative characterization of the carbonate rock reservoir pore space and lays a foundation of the carbonate rock reservoir classification based on NMR logging.