Experimental investigation of ice slurry flow pressure drop in horizontal tubes

Pressure drop behaviour of ice slurry based on ethanol–water mixture in circular horizontal tubes has been experimentally investigated. The secondary fluid was prepared by mixing ethyl alcohol and water to obtain initial alcohol concentration of 10.3% (initial freezing temperature ?4.4 °C). The pressure drop tests were conducted to cover laminar and slightly turbulent flow with ice mass fraction varying from 0% to 30% depending on test conditions. Results from flow tests reveal much higher pressure drop for higher ice concentrations and higher velocities in comparison to the single phase flow. However for ice concentrations of 15% and higher, certain velocity exists at which ice slurry pressure drop is same or even lower than for single phase flow. It seems that higher ice concentration delay flow pattern transition moment (from laminar to turbulent) toward higher velocities. In addition experimental results for pressure drop were compared to the analytical results, based on Poiseulle and Buckingham–Reiner models for laminar flow, Blasius, Darby and Melson, Dodge and Metzner, Steffe and Tomita for turbulent region and general correlation of Kitanovski which is valid for both flow regimes. For laminar flow and low buoyancy numbers Buckingham–Reiner method gives good agreement with experimental results while for turbulent flow best fit is provided with Dodge–Metzner and Tomita methods.Furthermore, for transport purposes it has been shown that ice mass fraction of 20% offers best ratio of ice slurry transport capability and required pumping power.     

Synthesis of Arylidene – Isoquinolinones bearing Combretastatin Skeleton by Cyclocarbopalladation/cross coupling Tandem Heck-Suzuki Miaura Reactions using nano catalyst Pd@Py-IL-SPION

Cyclocarbopalladation/cross-coupling cascade intramolecular Heck–Suzuki–Miyaura reactions is applied for the first time by palladium immobilized on pyridine-imidazolium ionic liquid supported magnetic iron oxide nanoparticle catalyst (denoted Pd@Py-IL-SPION) for the last step to synthesize trisubstituted arylidene–isoquinolinones derivatives having Combretastatin skeleton. The reaction is performed via propargylamide intermediates prepared by Ugi 4-CR reactions, which undergoes intramolecular Heck–Suzuki–Miyaura domino reaction to produce the desired trisubstituted arylidene-isoquinolinones. The method shows full regio- and stereoselectivity derives from the particular Pd-catalyzed syn-insertion of triple bond.     

Two spectral QSPR models of porphyrin macromolecules for chelating heavy metals and different ligands released from industrial solvents: CH2Cl2, CHCl3 and toluene

ABSTRACT

Two simple and reliable correlations are introduced for the prediction of emission and absorption of porphyrins and their derivatives, i.e. metalloporphyrins and ligand coordinated metalloporphyrins. They can be used to sense the extracted precious metals. The proposed models require only simple structural parameters such as the number of carbon, metal and metal-free molecular fragments of desirable porphyrins or their derivatives. Since the proposed models depend on molecular structures of the desired compounds, they can be easily applied for complex molecular structures. Experimental data of 272 porphyrin derivatives were used to derive and test the novel models for the assessment of their emission (Em.) and absorption (Abs.) values in three solvents namely dichloromethane, toluene and chloroform. The values of the coefficients of determination (r ²) for the training set (183 compounds) in dichloromethane and three different test sets, corresponding to the three mentioned solvents, for the emission and absorption correlations were greater than 0.70. The calculated values of the root-mean-square error (RMSE) for the training sets of Em. and Abs. correlations were equal to 7.56 and 4.86 nm, respectively. Further statistical parameters also confirm the high reliability of the new models.     

Design,synthesis, biological evaluation,and docking study of new acridine-9-carboxamide linked to 1,2,3-triazole derivatives as antidiabetic agents targeting α-glucosidase

A new series of acridine-9-carboxamide-1,2,3-triazole derivatives 7a-m were designed, synthesized, and evaluated as novel α-glucosidase inhibitors. Acridine-9-carboxamide-1,2,3-triazole scaffold has been designed by combination of effective moieties from potent α-glucosidase inhibitors. Most of the synthesized compounds were more potent than standard inhibitor acarbose. Among the title compounds, the most potent compounds were compounds 7j , 7k , and 7a with IC₅₀ values of 120.2 ± 1.0, 151.1 ± 1.4, and 157.6 ± 1.6 μM, respectively (IC₅₀ value of acarbose = 750.0 ± 10.0 μM). Docking study of the most potent compounds demonstrated that these compounds formed stable complexes with α-glucosidase active site. Anti-α-amylase assay of compounds 7j , 7k , and 7a was performed and no activity was observed. in vitro cytotoxicity assay of the latter compounds revealed that these compounds were not cytotoxic toward human normal (HDF) and cancer (MCF-7) cell lines. ADME and toxicity prediction of compounds 7j , 7k , and 7a were also performed.     

Polarity‐based fractionation in proteomics: hydrophilic interaction vs reversed‐phase liquid chromatography

During recent decades, hydrophilic interaction liquid chromatography (HILIC) ahs been introduced to fractionate or purify especially polar solutes such as peptides and proteins while reversed‐phase liquid chromatography (RPLC) is also a common strategy. RPLC is also a common dimension in multidimensional chromatography. In this study, the potential of HILIC vs RPLC chromatography was compared for proteome mapping of human peripheral blood mononuclear cell extract. In HILIC a silica‐based stationary phase and for RPLC a C₁₈ column were applied. Then separated proteins were eluted to an ion trap mass spectrometry system. Our results showed that the HILIC leads to more proteins being identified in comparison to RPLC. Among the total 181 identified proteins, 56 and 38 proteins were fractionated specifically by HILIC and RPLC, respectively. In order to demonstrate this, the physicochemical properties of identified proteins such as polarity and hydrophobicity were considered. This analysis indicated that polarity may play a major role in the HILIC separation of proteins vs RPLC. Using gene ontology enrichment analysis, it was also observed that differences in physicochemical properties conform to the cellular compartment and biological features. Finally, this study highlighted the potential of HILIC and the great orthogonality of RPLC in gel‐free proteomic studies. Copyright © 2015 John Wiley & Sons, Ltd.     

Understanding of thermal/thermo-oxidative degradation kinetics of polythiophene nanoparticles

The polythiophene nanoparticles (nano-PT) were prepared with average diameter of 20–35 nm. The nanostructurals of polythiophene were confirmed by TEM and SEM analyzes. The kinetics of the thermal degradation and thermal oxidative degradation of nano-PT were investigated by thermogravimetric analysis. Kissinger method, Flynn–Wall–Ozawa method, and advanced isoconversional method have been used to determine the activation energies of nano-PT degradation. The results showed that the thermal stability of nano-PT in pure N₂ is higher than that in air atmosphere. The analyzes of the solid-state processes mechanism of nano-PT by Criado et al. method showed: the thermal degradation process of nano-PT goes to a mechanism involving second-order (F ₂ mechanism); otherwise, the thermo-oxidative degradation process of nano-PT is corresponding to a phase boundary controlled reaction mechanism (R ₂ mechanism).     

Surfactant-Free Hydrothermal Synthesis of Mesoporous Niobia Samples and Their Photoinduced Decomposition of Terephthalic Acid (TPA)

This study introduces a low temperature surfactant-free hydrothermal method to synthesize mesoporous Nb₂O₅ photocatalysts using NbCl₅ and H₂O₂ as precursors that are subsequently calcinated at 300, 400 and 450 °C and are assigned as mNb₂O₅-300, mNb₂O₅-400 and mNb₂O₅-450, respectively. Commercial niobia sample was used as reference sample for comparison purpose. All of materials were characterized by XRD, SEM, UV–Vis DRS, FTIR, TG/DTG and BET techniques. The synthesized Nb₂O₅ particles especially mNb₂O₅-300 sample shows a high surface area (240 m²/g), a large pore volume (0.21 cm³/g) and an identifying morphology of these features. Photocatalytic decomposition of terephthalic acid was evaluated using UV–Vis spectrophotometer. The photocatalytic reactions followed pseudo-first-order kinetics with an apparent rate constant of k = 105 × 10^?3 min^?1 for mNb₂O₅-300 sample with the highest activity among all samples at natural pH (pH = 6). Meanwhile, it was observed that optimum pH of 4 resulted in fast photocatalytic reaction for mNb₂O₅-300 sample.