Suzuki cross-coupling reaction of aryl halides with arylboronic acids catalysed by Pd(II)-NaY zeolite

Pd(II)-exchanged NaY zeolite showed high activity in the Suzuki cross-coupling reactions of aryl bromides and iodides without added ligands. The DMF:water ratio, and the type and amount of base were found to be critical for the efficiency of the reaction. The catalyst is reusable after regeneration.     

Synthesis of persulfate containing poly (N-vinyl-2-pyrrolidone) (PVP) hydrogels in aqueous solutions by γ-induced radiation

The effect of ⁶⁰Co γ-irradiation on aqueous solutions of poly(N-vinyl-2-pyrrolidone) (PVP) in the presence of persulfate anion has been investigated. The gelation dose of PVP and persulfate containing PVP aqueous solutions has been determined. At low concentrations of persulfate (1.00–3.50%), gelation percentages exhibited a decreasing trend by increasing persulfate content in aqueous solutions of the polymer. The gelation doses of persulfate containing polymer solutions were calculated by the Charlesby–Pinner equation. It was observed that the gelation dose values were shifted to higher values by increasing persulfate concentration in solution. The ratio of the chain scission and crosslinking yields (G(s)/G(x)) was also determined. The results showed that the G(s)/G(x) ratios were smaller than one for PVP aqueous solution system, whereas those obtained for persulfate containing PVP aqueous solutions were higher than unity. The results implied that the chain scission of polymer is more effective than crosslinking in the presence of persulfate. Mechanism of the crosslinking and/or degradation and structure–property relationship of PVP and PVP/persulfate hydrogel systems were investigated by Fourier transformation infeared and thermal analysis (differential scanning calorimetry, thermal gravimetric analysis and differential thermai analysis) methods.     

Microencapsulated oleic–capric acid/hexadecane mixture as phase change material for thermal energy storage

Journal of Thermal Analysis and Calorimetry - Thermal energy storage systems provide efficiency in order to have better utilization of energy sources while protecting the environment. Thermal...     

Synthesis, thermal stability, electronic features, and antimicrobial activity of phenolic azo dyes and their Ni(II) and Cu(II) complexes

Four water soluble azo dyes, 4-(isopropyl)-2-[(E)-(4-chlorophenyl)diazenyl]phenol (L ¹), 4-(isopropyl)-2-[(E)-(2,4-dichlorophenyl)diazenyl]phenol (L²), 4-(sec-butyl)-2-[(E)-(4-chlorophenyl) diazenyl]phenol (L ³), 4-(sec-butyl)-2-[(E)-(2,4-dichlorophenyl)diazenyl]phenol (L ⁴), and their Cu(II) and Ni(II) complexes were synthesized and characterized using spectroscopic methods. Examination of their thermal stability revealed similar decomposition temperature of approximately 260–300°C and that they were more thermally stable than their metal complexes. Ni(II) complexes of ligands L² and L⁴ were more stable than the other coordination compounds. Among the synthesized ligands, L² and the complexes Cu(L³)₂ and Ni(L⁴)₂ showed both antimicrobial and antifungal activity. However, the other ligands and the complexes were poorly active against selected microorganisms.     

Investigation of the reaction mechanism and kinetics of production of anhydrous sodium metaborate (NaBO2) by a solid-state reaction

In this study, the solid-state reaction mechanism and kinetics were investigated for production of anhydrous sodium metaborate (NaBO₂), an industrially and technologically important boron compound. To assess the kinetics of solid-state production of NaBO₂, the chemical reaction between borax (Na₂B₄O₇) and sodium hydroxide (NaOH) was investigated by use of the thermal analysis techniques thermogravimetry (TG) and differential thermal analysis (DTA). DTA curves obtained under non-isothermal conditions at different heating rates (5, 10 and 20 °C/min), revealed five endothermic peaks corresponding to five solid-state reactions occurring at 70, 130, 295, 463, and 595 °C. The stages of the solid-state reaction used for production NaBO₂ were also analyzed by XRD, which showed that at 70 and 130 °C, Na₂B₄O₇ and NaOH particles contacted between the grains, and diffusion was initiated at the interface. However, there was not yet any observable formation of NaBO₂. Formation of NaBO₂ was initiated and sustained from 295 to 463 °C, and then completed at 595 °C; the product was anhydrous NaBO₂. Activation energies (E _a) of the solid-state reactions were calculated from the weight loss based on the Arrhenius model; it was found that in the initial stages of the solid-state reaction E _a values were lower than in the last three steps.     

Parametric optimization of heat transfer characteristics for helical coils

Journal of Thermal Analysis and Calorimetry - In this study, helically coiled tubes are used in a shell, and the effects of tube diameter, coil diameter, Reynolds number, Dean number and flow rate...     

Precision PEGylated Polymers Obtained by Sequence‐Controlled Copolymerization and Postpolymerization Modification

Copolymers containing water‐soluble poly(ethylene glycol) (PEG) side chains and precisely controlled functional microstructures were synthesized by sequence‐controlled copolymerization of donor and acceptor comonomers, that is, styrene derivatives and N‐substituted maleimides. Two routes were compared for the preparation of these structures: a) the direct use of a PEG–styrene macromonomer as a donor comonomer, and b) the use of an alkyne‐functionalized styrenic comonomer, which was PEGylated by copper‐catalyzed alkyne–azide cycloaddition after polymerization. The latter method was found to be the most versatile and enabled the synthesis of high‐precision copolymers. For example, PEGylated copolymers containing precisely positioned fluorescent (e.g. pyrene), switchable (e.g. azobenzene), and reactive functionalities (e.g. an activated ester) were prepared.     

Natural Melanin Nanoparticle‐decorated Screen‐printed Carbon Electrode: Performance Test for Amperometric Determination of Hexavalent Chromium as Model Trace

A biosensor was prepared with natural melanin nanoparticles (MNP) decorated on a screen‐printed carbon electrode (SPCE). Hexavalent chromium was selected as a well‐known heavy metal ion to be detected for testing the performance of novel biosensor. Natural MNP was extracted from cuttlefish (Sepia officinalis) ink. Surface decoration of SPCEs with MNP was performed by two different methods. The first one was layer‐by‐layer assembly (LBL‐A) for different cycle times(n). In the second one, plasma treatment of SPCE incorporated with evaporation‐induced self‐assembly (EI‐SA) techniques including different incubation times in MNP solutions. The performance of both modified SPCEs were tested for amperometric detection of Cr(VI) in various water samples, and peak reduction of Cr(VI) was determined at 0.33 V. Amperometric results showed wide linear ranges of 0.1–2 μM and 0.1–5 μM of Cr(VI) for SPCEs modified with 14n‐LBL‐A and 12h‐EI‐SA, respectively. The sensitivities of SPCEs modified with 14n‐LBL‐A and 12h‐EI‐SA techniques were 0.27 μA μM^?1 and 0.52 μA μM^?1, respectively. In addition, both modified SPCEs selectively detected Cr(VI) in a model aqueous system composed of certain other heavy metals and minerals, and tap and lake water samples. The LOD and LOQ values for 12h‐EI‐SA were 0.03 μM and 0.1 μM, respectively. This showed that MNP‐modified‐SPCEs generated via EI‐SA techniques have the potential to be an alternative to conventional detection methods such as ICP‐MS.     

Global existence and decay of solutions for the generalized bad Boussinesq equation

In this paper,we consider the global existence of solutions for the Cauchy problem of the generalized sixth order bad Boussinesq equation.Moreover,we show that the supremum norm of the solution decays algebraically to zero as(1+t)(1/7)when t approaches to infnity,provided the initial data are sufciently small and regular.