Development of a bioanalytical method for the quantification of sinococuline in human plasma and its application in phase I clinical pharmacokinetic study

A selective, highly sensitive, precise, and novel bioanalytical method has been developed and validated to quantify sinococuline, an active constituent present in the phytopharmaceutical drug product containing Cocculus hirsutus plant extract, in vivo. Chromatographic separation was achieved on a Luna Omega Polar-C18 bonded analytical column maintained at 45°C. The isocratic mobile phase consisted of methanol and ammonium formate buffer (60:40, v/v) at acidic pH with a low flow rate of 0.250 mL/min. Detection was performed on an API 4000 mass spectrometer using electrospray ionization in positive polarity and multiple reaction monitoring mode to achieve a lower limit of quantification of 1.50 ng/mL. Excellent accuracy and precision were obtained after extracting the analyte from plasma samples using a chemical analogue as an internal standard in the absence of an isotope-labeled compound. The extraction efficacy was evidenced from recovery study, and the analyte was found to be stable in plasma. Validation study demonstrated linearity with coefficient of correlation, r ≥ 0.99, and minimal matrix effect. This bioanalytical method was successfully applied to evaluate pharmacokinetic parameters of sinococuline from a phase I clinical trial of an aqueous extract of C. hirsutus in healthy human volunteers.     

Studies of Store-Induced Limit-Cycle Oscillations Using a Model with Full System Nonlinearities

The authors investigate limit-cycle oscillations of a wing/store configuration. Unlike typical aeroelastic studies that are based upon a linearized form of the governing equations, herein full system nonlinearities are retained, and include transonic flow effects, coupled responses from the structure, and store-related kinematics and dynamics. Unsteady aerodynamic loads are modeled with the equations from transonic small disturbance theory. The structural dynamics for the cantilevered wing are modeled by the nonlinear equations of motion for a beam. The effects of general store-placement are modeled by the nonlinear equations of motion related to the position-induced nonlinear kinematics. Chordwise deformations of the wing surface, as well as pylon and store flexibility, are assumed negligible. Nonlinear responses are studied by examining bifurcation and related response characteristics using direct simulation. Particular attention is given to cases for which large-time, time-dependent behavior is dependent on initial conditions, as observed for some configurations in flight test. Comparisons of results in which selective nonlinearities are excluded indicate that the accurate prediction of nonlinear responses such as limit cycle oscillations (LCOs) may depend upon consideration of all nonlinearities related to the full system.     

Thermal and biological studies of Schiff bases of chitosan derived from heteroaryl aldehydes

Journal of Thermal Analysis and Calorimetry - The synthesis of Schiff bases of chitosan is performed by the reaction of chitosan with different heteroaryl aldehydes, i.e., furfuraldehyde,...     

Reactive blends derived from modified soybean oil and silicone

Reactive blends prepared from methoxysilane terminated silicone polymers and silylated soybean oil are described and characterized. Although simple mixing of soy and silicones results in gross phase separation, homogeneous polymeric products are obtained by introducing reactive sites. These products can be used as protective coatings, additives to adhesives and new sealants. Exposure of the mixtures to moisture leads to hydrolysis of the methoxysilanes and subsequent condensation of the resulting silanols that yields stable siloxane linkages between the two immiscible phases. FTIR, TGA, and swell‐gel analyses indicate effective formation of these siloxane crosslinks. Reactive blends containing less than 20% silylated oil appeared completely transparent but increasing the soy content decreased the optical transparency. SEM micrographs reveal the silicone polymer as the continuous phase with individual spherical silylated soy oil particles distributed in it. The properties of these reactive blends vary from high elongation elastomers to high modulus resins depending on the composition. © 2016 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2016 , 54, 3086–3093     

Synthesis and in vitro antimicrobial screening of new pyrano[4,3-b]pyrane derivatives of 1H-pyrazole

A new series of pyrano[4,3-b]pyrane 4a-l bearing 1H-pyrazole has been synthesized by one pot base catalyzed cyclocondensation reaction of 1H-pyrazole-4-carbaldehyde la-1,malononitrile 2 and 4-hydroxy-6-methylpyrone 3.All the synthesized compounds were screened against six bacterial pathogens,namely B.subtilis,C.tetani,S.pneumoniae,S.typhi,V.cholerae, E.coli and antifungal activity against,two fungal pathogens,A.fumigatus and C.albicans using broth microdilution MIC method. Some of the compounds are found to be equipotent or more potent than that of commercial drugs,against most of employed strains.     

EDOT‐diketopyrrolopyrrole copolymers for high bulk hole mobility and near infrared absorption

To obtain novel low‐bandgap materials with tailored hole‐transport properties and extended absorption, electron rich 3,4‐ethylenedioxythiophene is introduced as a comonomer in diketopyrrolo[3,4‐c]pyrrole copolymers with different aryl flanking units. The polymers are characterized by absorption and photoluminescence spectroscopy, dynamic scanning calorimetry, cyclic voltammetry, and X‐ray diffraction. The charge transport properties of these new materials are studied carefully using an organic field effect transistor geometry where the charge carriers are transported over a narrow channel at the semiconductor/dielectric interface. These results are compared to bulk charge carrier mobilities using space‐charge limited current (SCLC) measurements, in which the charge carrier is transported through the complete film thickness of several hundred nanometers. Finally, charge carrier mobilities are correlated with the electronic structure of the compounds. We find that in particular the thiophene‐flanked copolymer PDPP[T]₂‐EDOT is a very promising candidate for organic photovoltaics, showing an absorption response in the near infrared region with an optical bandgap of 1.15 eV and a very high bulk hole mobility of 2.9 × 10^?4 cm² V^?1 s^?1 as measured by SCLC. This value is two orders of magnitudes higher than SCLC mobilities reported for other polydiketopyrrolopyrroles and is in the range of the well‐known hole transporting polymer poly(3‐hexylthiophene). © 2015 Wiley Periodicals, Inc. J. Polym. Sci., Part B: Polym. Phys. 2016 , 54, 639–648     

Enhanced dielectric permittivity in poly (vinylidene) fluoride/multiwalled carbon nanotubes nanocomposite thin films fabricated by pulsed laser deposition

The fabrication of high quality thin films of poly (vinylidene fluoride) embedded with multiwalled carbon nanotubes using pulsed laser deposition technique is reported. The prepared films were characterized for structural, morphology and dielectric properties. The morphology analysis revealed uniform dispersion of multiwalled carbon nanotubes throughout the polymer matrix. X-ray diffraction results suggested that the poly (vinylidene fluoride) film is in amorphous phase while addition of multiwalled carbon nanotubes showed presence of crystalline peaks in the nanocomposites films. It was interesting to note that the nanocomposite films exhibits significant enhancement of the ferroelectric β-phase as evidenced by the X-ray diffraction and Fourier transform infrared spectroscopy results. The dielectric analysis shows a remarkable enhancement in the dielectric permittivity of nanocomposites with lower loss and conductivity level. The results can be attributed to the formation of minicapacitor network and relatively higher percolation threshold in the nanocomposites.     

Correlation of charge transport with structural order in highly ordered melt‐crystallized poly(3‐hexylthiophene) thin films

A series of well‐defined poly(3‐hexylthiophene)s (P3HT) of different molecular weight (MW) and high regioregularity was investigated for charge transport properties in as‐cast and melt‐crystallized films. The semicrystalline structure of the P3HT was characterized by X‐ray scattering and Atomic force microscopy. Crystallization by cooling from the melt led to a substantial increase in crystallinity and a stronger alignment of the crystals in comparison to as‐cast films. The increase in crystallinity went along with an increase in hole mobility of up to an order of magnitude as measured by the space charge limited current method. Additionally, the hole mobility depended on the long period of P3HT lamellae and consequently on the MW. In compliance with the long period, the charge carrier mobility first increased with the MW before decreasing again at the onset of chain folding. © 2013 Wiley Periodicals, Inc. J. Polym. Sci., Part B: Polym. Phys. 2013 , 51, 943–951