Preparation of cellulosic soft and composite materials using ionic liquid media and ion gels

Cellulose - Ionic liquids (ILs) are powerful media for the modification and functionalization of cellulose. This review article discusses the preparation of cellulosic soft and composite materials...     

Anionic ring-opening polymerization behavior of trans-cyclohexene carbonate using metal tert-butoxides: Construction of living anionic ring-opening polymerization by lithium tert-butoxide

Anionic ring-opening polymerization (ROP) behavior of trans-cyclohexene carbonate (CHC) using metal alkoxides as initiators was investigated. As a result, lithium tert-butoxide-initiated ROP of CHC with a high-monomer concentration (10 M) at low temperature (−15 to −10°C) proceeded to afford a poly(trans-cyclohexene carbonate) (PCHC) without undesired side reactions such as mainly backbiting. The suppression of side reactions enables the control of the molecular weight (M_n = 2400–6100) of PCHC with low molar-mass dispersity values (M_w/M_n = 1.16–1.22). Furthermore, by increasing the feed ratio of the monomer to the initiator, the molecular weight increases proportionally, indicating a controllable polymerization. The results of a matrix-assisted laser desorption/ionization time-of-flight mass spectrometry analysis, a kinetic study, and a chain extension experiment suggested a living nature of this ROP using lithium tert-butoxide.     

Atmospheric pressure waves in the field of volcanology

Atmospheric pressure waves are a notable phenomenon associated with explosive volcanic eruptions. They can provide us with information about eruption processes that are useful both scientifically and practically. In this paper, we give a brief review of studies that have been carried out on this phenomenon in the field of volcanology. Then, we introduce a prototype tool called ‘MOVE’ (Mobile Observatory for Volcanic Explosions). It is a remote-controlled vehicle carrying various instruments to observe pressure waves and the eruption processes. PACS 91.40.Dr · 91.40.Ft · 93.65.+e · 93.85.+qThis paper was based on work presented at the 2nd International Symposium on Interdisciplinary Shock Wave Research, Sendai, Japan on March 1–3, 2005.     

Numerical simulation for fin effect of a rectangular latent heat storage vessel packed with molten salt under heat release process

The present numerical study has dealt with the enhancement of latent heat Release by using plate type fins mounted on the vertical cooling surface in the rectangular vessel packed with molten salt as a latent heat storage material. It was found that the fin thickness and pitch exerted an influence on solidification heat transfer in a liquid layer of a nitric molten salt. The numerical results elucidated the flow pattern, velocity profile and heat transfer rate in the melted liquid layer.     

Forced-convection freezing heat transfer characteristics in a return bend with a rectangular cross section

Experiments have been performed to investigate the freezing heat transfer characteristics in a return bend with a rectangular cross section. The experiments were carried out for two kinds of duct heights of 30 and 50 mm under the fixed size of 300 mm in duct width and 159 mm in curvature radius of convex wall. Both the convex and concave walls of a return bend were kept less than the freezing temperature of water. It was found that the freezing characteristics on the convex wall are markedly different from those on the concave wall of a return bend, and that the cooling temperature ratio is one of the most important parameters on the forced-convection freezing heat transfer in a return bend.     

Highly Isospecific Polymerization of Silyl‐Protected ω‐Alkenols Using an [OSSO]‐Type Bis(phenolato) Dichloro Zirconium(IV) Precatalyst

The coordination polymerization of silyl‐protected ω‐alkenols such as ω‐alken‐α‐oxytriisopropylsilanes 1 provides poly(ω‐alkenyl‐α‐oxytriisopropylsilalne)s with a highly isospecific microstructure ([mmmm] > 95%) when a combination of [OSSO]‐type bis(phenolato) dichloro zirconium(IV) complex 2 and dried methylaluminoxane is used as the precatalyst and activator, respectively. The resulting siloxy‐substituted polymers could be efficiently transformed into the corresponding functionalized polyolefins, which contained up to 90% acetyl groups and ≈7% hydroxy groups in the terminal side chains.

     

Construction of a High‐Mannose‐Type Glycan Library by a Renewed Top‐Down Chemo‐Enzymatic Approach

A comprehensive method for the construction of a high‐mannose‐type glycan library by systematic chemo‐enzymatic trimming of a single Man9‐based precursor was developed. It consists of the chemical synthesis of a non‐natural tridecasaccharide precursor, the orthogonal demasking of the non‐reducing ends, and trimming by glycosidases, which enabled a comprehensive synthesis of high‐mannose‐type glycans in their mono‐ or non‐glucosylated forms. It employed glucose, isopropylidene, and N‐acetylglucosamine groups for blocking the A‐, B‐, and C‐arms, respectively. After systematic trimming of the precursor, thirty‐seven high‐mannose‐type glycans were obtained. The power of the methodology was demonstrated by the enzymatic activity of human recombinant N‐acetylglucosaminyltransferase‐I toward M7–M3 glycans, clarifying the substrate specificity in the context of high‐mannose‐type glycans.     

Facile synthesis of graft copolymers containing rigid poly(dialkyl fumarate) branches by macromonomer method

Graft copolymers show microphase separated structure as seen in block copolymers and have lower intrinsic viscosity than block copolymers because of a branching structure. Therefore, considering molding processability, especially for polymers containing rigid segments, graft copolymers are useful architectures. In this work, graft copolymers containing rigid poly(diisopropyl fumarate) (PDiPF) branches were synthesized by full free‐radical polymerization process. First, synthesis of PDiPF macromonomers by addition‐fragmentation chain transfer (AFCT) was investigated. 2,2‐Dimethyl‐4‐methylene‐pentanedioic acid dimethyl ester was found to be an efficient AFCT agent for diisopropyl fumarate (DiPF) polymerization because of the suppression of undesired primary radical termination, which significantly took place when common AFCT agent, methyl 2‐(bromomethyl)acrylate, was used. Copolymerization of PDiPF macromonomer with ethyl acrylate accomplished the generation of the graft copolymer having flexible poly(ethyl acrylate) backbone and rigid PDiPF branches. The graft copolymer showed a microphase separated structure, high transparency, and characteristic thermal properties to PDiPF and poly(ethyl acrylate). © 2019 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2019 , 57, 2474–2480     

Preparation of thermo- and redox-responsive branched polymers composed of three-armed oligo(ethylene glycol)

We herein report the preparation of thermo- and redox-responsive branched polymers by the condensation reaction of three-armed oligo(ethylene glycol) (trisOEG) and cystamine (CA). The prepared branched polymers exhibited a soluble–insoluble transition at a lower critical solution temperature (LCST) and formed coacervate droplets through a liquid–liquid phase separation process. We then demonstrated control of the LCSTs of the branched polymers by varying the feed ratio of CA and the surrounding salt concentration close to body temperature. In addition, the trisOEG-cys _x polymer formed coacervate droplets above the LCST, in which hydrophobic molecules were condensed. The redox response of the branched polymers was also investigated. Interestingly, the branched polymers degraded to low-molecular-weight materials (i.e., trisOEG) in the presence of dithiothereitol as a reducing agent through cleavage of the disulfide bond of CA. This facile preparation of branched polymers is expected to be valuable in the context of functional biomedical materials and modifiers for materials surfaces, such as the bases for drug delivery carriers and separation materials. © 2018 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2018 , 56, 2623–2629