非对称铺层复合材料层合板质量优化设计

复合材料广泛应用于航空航天等领域,追求轻量化设计已经成为研究重点。对复合材料层合板质量优化设计,可以减少层合板的纤维用量,减小层合板的质量,降低成本。首先研究复合材料层合板在承受轴向载荷时,产生的形变量、应力示意图,分析容易发生失效部位;以层合板铺层厚度为设计变量,最大应变、铺层比例等为约束条件,最小化层合板质量为优化目标,对碳纤维复合材料层合板铺层厚度等设计变量进行优化,利用强度理论对优化结果进行校核,结合力学试验对比分析优化前后层合板力学性能。结果表明:碳纤维复合材料层合板经过优化后,总质量减轻约16.7%,优化后的层合板满足复合材料强度理论,实验结果与软件仿真具有一致性,说明优化方法是合理可靠的。     

聚丁二酸丁二醇酯与氯醚弹性体协同增韧改性聚乳酸多元共混体系

以来源于可再生资源聚丁二酸丁二醇酯(PBS)和氯醚橡胶(ECO)作为聚乳酸(PLA)的增韧改性剂,通过熔融共混的方法制备了PLA/PBS/ECO三元共混体系。动态力学分析和扫描电子显微镜结果表明,ECO促进了PBS和PLA之间的相容性。力学性能测试表明,ECO与PBS可实现对聚乳酸基体的协同增韧: PLA/PBS/ECO(70/20/10)显示出最优的拉伸性能,断裂伸长率高达270%;PLA/PBS/ECO(70/10/20)的冲击强度提高至23.7 kJ/m²,是纯聚乳酸的12倍。结合形态结构和冲击断面形貌分析表明ECO的存在可起到增容/增韧双重作用, 与柔性PBS产生良好的协同效应,有效改善聚乳酸材料的韧性。我们的研究表明,构造PLA-柔性生物聚酯和生物基弹性体多元共混体系是一种获得高性能生物基材料简单高效的手段。     

Fabrication and Frequency Response Characteristics of A1N-Based Solidly Mounted Resonator

Film bulk acoustic resonator （FBAR） with solidly mounted resonator （SMR）-type is carried out by rf magnetic sputtering. To fabricate SMR-type FBAR, alternative high and low acoustic impedance layers, Mo/Ti multilayer, are adopted as Bragg reflector deposited by dc magnetron sputtering. The influences of sputtering pressure, substrate temperature and sputtering power on the surface roughness of Bragg reflector layer are discussed. From the atom force microscopy （AFM） analysis, the surface roughness of the Bragg reflector is improved remarkably by controlling deposition conditions. Under the appropriate sputtering condition, AlN thin films with highly c-axis-preferred orientation are deposited by rf magnetron sputtering. The performance of fabricated Mo/Ti SMR shows that the electromechanical coupling coefficient is 3.89%, the series and parallel resonant frequencies appear at 2.49 and 2.53 GHz, with their quality factors 134.2 and 97.6, respectively.