Cecropin B抗菌肽接枝丝素蛋白膜的制备和表征

以体积分数为60%的乙醇处理制得不溶性再生丝素膜, 通过碳二亚胺法将Cecropin B抗菌肽共价接枝到丝素膜表面, 利用红外光谱、扫描电镜、X射线能谱和抗菌性测试等手段对制得的丝素膜结构和表面特性及其抗菌性能进行了测试分析. 结果表明, Cecropin B抗菌肽成功地接枝到了丝素膜的表面, 接枝后的丝素膜水溶性低, 并具有良好、 持久的抗菌能力.     

桑蚕丝素蛋白初始结构对其矿化作用的影响

以碱金属离子诱导桑蚕丝素蛋白溶液发生构象转变, 研究了蛋白质初始结构对其矿化作用的影响. FT-IR, XRD和SEM等测试结果显示, 未经任何处理的桑蚕丝素蛋白溶液矿化后形成片状复合物, 其无机相以二水磷酸氢钙(DCPD)为主; 而经过K^＋和Na^＋金属离子处理后, 桑蚕丝素溶液的结构由无规线团/螺旋构象向β-折叠发生转变, 矿化后成纤维状, 并相互结合呈现纳米级的三维多孔结构, 其无机相以热力学稳定的羟基磷灰石(HA)为主. 可以认为, 丝素蛋白结构转化为较伸展的β-折叠后, 使得更多的亲水基团暴露在外面, 在丝素蛋白分子不断凝聚成纤过程中, HA结晶快速生长并附着在这些微纤上, 最终形成纤维状的丝素蛋白/HA复合物. 该结果为阐明蛋白质的生物矿化过程及其调控机理提供了理论依据, 同时可以从矿化复合物的形成来反映这些微量元素可能对骨组织形成的影响, 为临床骨组织的修复提供一定的参考.     

Conformational Transformation Exhibited by the Peptide Extracted from Crystalline Region of Bombyx mori Silk Fibroin in Solid and Solution States

The conformational transformation of a 30-residue peptide H（Ala-Gly-Ser-Gly-AIa-Gly）5OH, i.e., （AGSGAG）5, extracted from highly crystalline region of Bombyx mori （B. mori） silk fibroin was described by using the high resolution solid state 13^C NMR, and CD spectroscopies. Based on the conformation-dependent 13^C NMR chemical shifts of the Ala, Gly and Ser residues and the line-shape analysis of the conformation sensitive Ala Cβ resonance, the peptide revealed a strong preference for silk Ⅱ structural form, i,e,, an antiparallel fl-sheet structure （φ= - 140±20°and ψ= 135±20°） in solid state. On the contrary, the CD spectra of this peptide in the two non-native hexafluorinated fibre spinning solvents, hexafluoroisopropanol （HFIP） and hexafluoroacetone （HFA）, exhibited the existence of an unusual tightly-folded conformation resembling 310-helix （φ=- 60±20° and ψ=-30±20°）, as judged from the R ratio of [θ]222/[θ]203 in HFIP solution, whereas a dynamically averaged unordered structure in HFA, Taken together, the information inclined to hypothesis that the primary structure of the highly crystalline regions of B. mori silk fibroin may be easily accessible to the large conformational changes, which in turn may be critical for facilitating the structural transformation from unprocessed silk fibroin （silk I form） to processed silk fiber （silk Ⅱform）.     

Diagnosis of Multiple Gases Separated from Transformer Oil Using Cavity-Enhanced Raman Spectroscopy

The Raman signal of gas molecules is very weak due to its small scattering cross section. Here, a near-confocal cavity-enhanced Raman detection system is demonstrated. In the cavity, a high power light of 9W is achieved by using a cw 200mW 532nm laser, which greatly enhances the detection sensitivity of gas species. A photomultiplier tube connected to a spectrometer is used as the detection system. The Raman spectra of the mixed gases separated from transformer oil has been observed. The relationship of absolute Raman intensity and gas pressure is also obtained. To our knowledge, this is the first Raman system to detect the gases separated from transformer oil.     

纳米羟基磷灰石/丝素蛋白复合支架材料的降解特性及生物相容性研究

应用共混法制备了纳米羟基磷灰石/丝素蛋白复合支架材料, 通过体外降解和细胞培养实验研究了复合支架材料的降解特性和生物相容性. 体外降解实验结果显示, 复合支架材料具有稳定的降解能力; 在降解过程中, 羟基磷灰石由于与降解液发生钙、磷等离子的交换, 使其结晶得到了进一步生长和完善. 利用细胞计数法、四甲基偶氮唑盐(MTT)比色法和碱性磷酸酶(ALP)活性测定等分析了复合支架材料的生物相容性, 结果表明, MG63细胞在复合支架材料上具有良好的粘附、增殖能力, 并可引起早期的骨分化. 因此, 纳米羟基磷灰石/丝素蛋白复合支架作为骨组织工程的支架材料具有良好的应用前景.     

One-pot green fabrication and antibacterial activity of thermally stable corn-like CNC/Ag nanocomposites

Corn-like cellulose nanocrystals/silver (CNC/Ag) nanocomposites were prepared by formic acid/hydrochloric acid hydrolysis of commercial microcrystalline cellulose (MCC), and redox reaction with silver ammonia aqueous solution (Ag(NH₃)₂(OH)) in one-pot green synthesis, in which the preparation and modification of CNCs were performed simultaneously and the resultant modified CNCs could be as reducing, stabilizing and supporting agents for silver nanoparticles. The influences of the Ag⁺ ion concentrations on the morphology, microstructure, and properties of the CNC/Ag nanocomposites were investigated. It is found that corn-like CNC/Ag nanocomposites containing Ag nanoparticles with diameter of about 20–40 nm were obtained. Compared to the MCCs, high crystallinity of 88.5 % and the maximum degradation temperature (T _max) of 364.5 °C can be achieved. Moreover, the CNC/Ag nanocomposites showed strong antibacterial activity against both Gram-negative Escherichia coli and Gram-positive Staphylococcus aureus. Furthermore, such nanocomposites can act as bifunctional nanofillers to improve thermal stability, mechanical property, and antibacterial activity of commercial poly(3-hydroxybutyrate-co-3-hydroxyvalerate) and poly(lactic acid).     

多孔羟基磷灰石纳米球作为抗坏血酸载体的研究

利用超声辅助的化学共沉淀法制备了羟基磷灰石纳米材料, 并实现了其对抗坏血酸的包载. 采用透射电镜、氮气吸附孔径分析仪、X射线粉末衍射仪、傅里叶红外光谱仪和紫外分光光度计等对所得纳米材料的微观形貌、孔径分布、物相、表面官能团和负载抗坏血酸量进行了表征和分析, 并在超声辅助条件下进行了药物释放动力学研究. 结果表明, 在抗坏血酸存在的条件下, 利用声化学方法可以制得多孔的羟基磷灰石纳米球, 其平均直径约为140 nm, 平均孔直径约为15 nm, 可实现对抗坏血酸的包载. 此外, 在超声辅助的条件下, 该纳米球具有持续释药的能力, 不同的超声功率能改变载药粒的释药速度, 表明这种多孔羟基磷灰石纳米球是一种具有很大应用前景的骨组织药物载体.     

预处理对丝素蛋白膜调控羟基磷灰石晶体生长的影响

以丝素蛋白膜为基质, 在模拟体液中诱导羟基磷灰石晶体在其表面沉积和生长. 利用XRD, SEM, HRTEM, AFM和FTIR等表征手段研究了不同预处理方法对羟基磷灰石晶体的形成及其微观形貌的影响. 结果表明, 丝素膜可有效地诱导羟基磷灰石晶体在其表面沉积和生长; 较长的矿化时间有利于形成较多结晶度良好的HAP晶体; 而不同预处理方法对丝素膜的表面结构产生了不同影响, 进而调制在其表面沉积的羟基磷灰石的形貌和生长方向. 同时对丝素蛋白膜调控羟基磷灰石晶体生长的机制进行了必要的探讨.     

A universal route for the simultaneous extraction and functionalization of cellulose nanocrystals from industrial and agricultural celluloses

A simple route was designed to extract the cellulose nanocrystals (CNCs) with formate groups from industrial and agricultural celluloses like microcrystalline cellulose (MCC), viscose fiber, ginger fiber, and bamboo fiber. The effect of reaction time on the microstructure and properties of the CNCs was investigated in detail, while microstructure and properties of different CNCs were compared. The rod-like CNCs (MCC) with hundreds of nanometers in length and about 10 nm in width, nanofibrillated CNCs (ginger fiber bamboo fiber) with average width of 30 nm and the length of 1 μm, and spherical CNCs (viscose fiber) with the width of 56 nm were obtained by one-step HCOOH/HCl hydrolysis. The CNCs with improved thermal stability showed the maximum degradation temperature (T _max) of 368.9–388.2 °C due to the introduction of formate groups (reducibility) and the increased crystallinity. Such CNCs may be used as an effective template for the synthesis of nanohybrids or reinforcing material for high-performance nanocomposites.