Unravelling the Enigma of Nonoxidative Conversion of Methane on Iron Single-Atom Catalysts

The direct, nonoxidative conversion of methane on a silica-confined single-atom iron catalyst is a landmark discovery in catalysis, but the proposed gas-phase reaction mechanism is still open to discussion. Here, we report a surface reaction mechanism by computational modeling and simulations. The activation of methane occurs at the single iron site, whereas the dissociated methyl disfavors desorption into gas phase under the reactive conditions. In contrast, the dissociated methyl prefers transferring to adjacent carbon sites of the active center (Fe₁©SiC₂), followed by C−C coupling and hydrogen transfer to produce the main product (ethylene) via a key −CH−CH₂ intermediate. We find a quasi Mars–van Krevelen (quasi-MvK) surface reaction mechanism involving extracting and refilling the surface carbon atoms for the nonoxidative conversion of methane on Fe₁©SiO₂ and this surface process is identified to be more plausible than the alternative gas-phase reaction mechanism.     

基于金纳米棒-辣根过氧化物酶协同效应的过氧化苯甲酰生物传感器

将金纳米棒(AuNRs)和辣根过氧化物酶(HRP)以自组装的方式依次修饰到Au电极表面,构建了响应过氧化苯甲酰(BPO)生物传感器。采用循环伏安法和电流时间法研究了传感器的电化学性质和最佳工作条件;由于HRP/AuNRs复合膜的协同效应,电极性能得到显著改善。在最佳工作条件下(工作电压-0.02V,pH 7的磷酸盐缓冲体系),BPO浓度在5.0×10-6～1.0×10-4 mol/L范围内与电极的电流响应值呈良好的线性关系,线性回归方程为:i(μA)=12.6796C(mmol/L)+0.2406,R=0.9993。电极的检出限为8.5×10-7 mol/L。电极用于面粉中BPO的测定,平行测定6次,平均回收率为97.9%～100.1%,相对标准偏差(RSD)为0.5%～2.1%。本方法用于商品面粉中的BPO测定,取得满意结果。     

3,4-二硝基呋咱基氧化呋咱的比热容、热力学性质、绝热至爆时间及热感度概率密度分布

应用Micro-DSCⅢ微热量仪对3,4-二硝基呋咱基氧化呋咱(DNTF)进行比热容测定, 得到了DNTF比热容随温度变化的线性方程定压cp=0.31064＋2.109×10-3T (285 K相似文献   

Zn-Y/BEA上乙醇一步法制1，}3-丁二烯的反应机理及优异催化剂筛选

随着beta分子筛负载双金属催化剂的开发,乙醇一步法制1,3-丁二烯}取得了突破性进展. 然而,从乙醇到丁二烯的反应机理复杂,尚未完全阐明,也缺乏基于中心金属原子的催化剂筛选. 本文采用密度泛函理论计算方法,系统地研究了乙醇在Zn-Y/BEA催化剂上一步法制丁二烯的机理. 结果表明,乙醇脱氢更倾向于在Zn位点进行,决速步骤的反应热仅为0.77 eV;羟醇缩合生成丁二烯更倾向于在Y位点进行,决速步骤的反应热仅为0.69 eV. 基于所揭示的反应机理,选择了六种元素代替Y来筛选用于该反应的Zn-M/BEA(M=Sn、Nb、Ta、Hf、Zr、Ti)的优良组合. 结果表明,与其他六种催化剂相比,Zn-Y/BEA仍是最优选的催化剂,Zn-Zr/BEA、Zn-Ti/BEA和 Zn-Sn/BEA也是乙醇转化为丁二烯的可行催化剂. 本工作不仅揭示了Zn-Y/BEA催化乙醇一步法制丁二烯的反应机理,而且为该反应提供了其他可能的催化剂选择.     

Changes in morphology and activity of transglutaminase following cross-linking and immobilization on a polypropylene microporous membrane

Transglutaminase (TGase) was cross-linked with glutaraldehyde, and cross-linked crystalline transglutaminase was immobilized on a polypropylene microporous membrane by UV-induced grafting. Immobilized enzyme activity were calculated to be 0.128 U/cm2 polypropylene microporous membrane. The microstructure and enzyme characteristics of free, cross-linked and immobilized transglutaminase were compared. The optimum temperature of free transglutaminase was determined to be approximately 40 °C, while cross-linking and immobilization resulted in an increase to approximately 45 °C and 50 °C. At 60 °C, immobilized, cross-linked and free transglutaminase retained 91.7 ± 1.20%, 63.2 ± 1.05% and 37.9 ± 0.98% maximum activity, respectively. The optimum pH was unaffected by the state of transglutaminase. However, the thermal and pH stabilities of cross-linked and immobilized transglutaminase were shown to increase.     

A novel method for iodate determination using cadmium sulfide quantum dots as fluorescence probes

We have developed a novel method for the determination of iodate based on the carboxymethyl cellulose-capped CdS quantum dots (QDs). Factors affecting the iodate detection were investigated, and the optimum conditions were determined. Under the optimum conditions, the relative fluorescence intensity of CdS quantum dots was linearly proportional to IO₃⁻ over a concentration range from 1.0 × 10⁻⁸ to 1.0 × 10⁻⁵ mol L⁻¹ with a correlation coefficient of 0.9987 and a detection limit of 6.0 nmol L⁻¹. Iodide, being oxidized by bromine to form iodate, was detected indirectly. The method was successfully applied to the determination of iodate and total amount of iodine in table salt samples. The related mechanism was also discussed.     

Reaction Mechanism of One-Step Conversion of Ethanol to 1, 3-Butadiene over Zn-Y/BEA and Superior Catalysts Screening

The one-step conversion of ethanol to 1, 3-butadiene has achieved a breakthrough with the development of beta zeolite supported dual metal catalysts. However, the reaction mechanism from ethanol to butadiene is complex and has not yet been fully elucidated, and no catalyst screening effort has been done based on central metal atoms. In this work, density functional theory (DFT) calculations were employed to study the mechanism of one-step conversion of ethanol to butadiene over Zn-Y/BEA catalyst. The results show that ethanol dehydrogenation prefers to proceed on Zn site with a reaction energy of 0.77 eV in the rate-determining step, and the aldol condensation to produce butadiene prefers to proceed on Y site with a reaction energy of 0.69 eV in the rate-determining step. Based on the mechanism revealed, six elements were selected to replace Y for screening superior combination of Zn-M/BEA (M=Sn, Nb, Ta, Hf, Zr, Ti; BEA: beta polymorph A) for this reaction. As a result, Zn-Y/BEA (0.69 eV) is proven to be the most preferring catalyst compared with the other six ones, and Zn-Zr/BEA (0.85 eV), Zn-Ti/BEA (0.87 eV), and Zn-Sn/BEA (0.93 eV) can be potential candidates for the conversion of ethanol to butadiene. This work not only provides mechanistic insights into one-step catalytic conversion of ethanol to butadiene over Zn-Y/BEA catalyst but also offers more promising catalyst candidates for this reaction.     

Electronic and optical properties of kesterite Cu2ZnSnS4 under in-plane biaxial strains: First-principles calculations

The electronic structures and optical properties of Cu₂ZnSnS₄ (CZTS) under in-plane biaxial strain were systematically investigated using first-principles calculations based on generalized gradient approximation and hybrid functional method, respectively. It is found that the fundamental bandgap at the Γ point decreases linearly with increasing tensile biaxial strain perpendicular to c-axis. However, a bandgap maximum occurs as the compressive biaxial strain is 1.5%. Further increase of compressive strain decreases the bandgap. In addition, the optical properties of CZTS under biaxial strain are also calculated, and the variation trend of optical bandgap with biaxial strain is consistent with the fundamental bandgap.     

以碲化镉量子点为荧光探针测定西红柿中残留吗啉胍

利用吗啉胍使CdTe量子点荧光增强的特性,建立了西红柿中吗啉胍残留量的检测新方法。研究了影响量子点荧光探针行为的因素,确定最佳工作条件:量子点浓度为1×10-4mol/L,pH=5.6,反应温度为20℃,反应时间为20 min。在最佳测定条件下,CdTe量子点荧光探针对吗啉胍响应的线性范围为1.0×10-12~5.0×10-10mol/L,检出限为5.2×10-13mol/L,线性相关系数R=0.9981,方法的回收率97%~106%,常见共存离子、抗生素、维生素等共存物质对吗啉胍的测定不产生干扰。本方法用于西红柿中吗啉胍残留量的测定,结果令人满意。     

1-氨基-1-肼基-2,2-二硝基乙烯(AHDNE)的合成、 晶体结构和理论计算

利用1,1-二氨基-2,2-二硝基乙烯(FOX-7)和水合肼在水体系中合成了1-氨基-1-肼基-2,2-二硝基乙烯(AHDNE), 并在甲醇溶液中培养出可用于X射线衍射的单晶. 晶体属正交晶系, 空间群为Pnma, 晶胞参数为: a＝0.6283(4) nm, b＝0.7713(5) nm, c＝1.2280(8) nm, a＝b＝g＝90°, V＝0.5950(7) nm3, Dc＝1.821 g/cm3, μ＝0.171 mm－1, F(000)＝336, Z＝4, R1＝0.0489, wR2＝0.1456. 选取标题化合物的一个结构单元作为初始模型, 运用Gaussian 03程序, 在6-311＋G(d)的基组水平上, 用HF, MP2以及B3LYP三种计算方法对标题化合物进行了几何全优化, 并对其成键情况及自然键轨道(NBO)进行了分析.