THE POLYMERIZATION OF EPICHLOROHYDRIN WITH Nd(i-oPr)_3-Al(i-Bu)_3 SYSTEM

Epichlorohydrin (ECH) was polymerized with a rare earth catalytic system: Nd (i-OPr)_3-Al (i-Bu)_3. The effects of Al/Nd molar ratio, solvents, the polymerization time and temperature,the aging time and temperature of the catalyst preparation were studied. The results showed thatat a low Al/Nd molar ratio (4) of the Nd(i-OPr)_3-Al(i-Bu)_3 system ECH polymerized at a lowtemperature (248K) with a high conversion. The average molecular weight ofpolyepichlorohydrin (PECH) ranged from 1×10~5 to 3×10~5.     

[(C~8H~8)Y(μ-OC~6H~5)(THF)]~2的合成和晶体结构

本文用(C~8H~8)Y(μ-Cl)(THF)]~2与NaOC~6H~5以1:2摩尔比在四氢呋喃中反应, 合成了新的中性配合物[(C~8H~8)Y(μ-OC~6H~5)(THF)]~2, 经过分离, 在-30℃下培养得到无色晶体, 用元素分析, 核磁共振和质谱进行了鉴定, 并以X-射线衍射测定了晶体结构。     

Synthesis and Catalytic Application of Homo-bimetallic Metallocene Complexes as Ethylene Polymerization Catalysts

ＩｎｔｒｏｄｕｃｔｉｏｎＩｔｉｓｗｅｌｌｋｎｏｗｎｔｈａｔｍｅｔａｌｌｏｃｅｎｅｓａｃｔｉｖａｔｅｄｗｉｔｈｍｅｔｈｙｌａｌｕｍｉｎｏｘａｎｅ (ＭＡＯ)ａｒｅｈｉｇｈｌｙａｃｔｉｖｅｈｏｍｏｇｅｎｅｏｕｓＺｉｅｇｌｅｒ Ｎａｔｔａｃａｔａｌｙｓｔｓｔｈａｔｐｒｏｄｕｃｅｐｏｌｙｏｌｅｆｉｎｗｉｔｈｃｏｎ ｔｒｏｌｌｅｄｓｔｅｒｅｏｒｅｇｕｌａｒｉｔｙａｎｄｎａｒｒｏｗｍｏｌｅｃｕｌａｒｗｅｉｇｈｔｄｉｓｔｒｉ ｂｕｔｉｏｎ ,1 4 ｈｏｗｅｖｅｒ,ｔｈｅｍｏｌｅｃｕｌａｒｗｅｉｇｈｔｏｆｔｈｅｐｏｌｙｍ…     

稀土乙酰丙酮盐催化聚合ε－己内酯和丙交酯

稀土乙酰丙酮盐催化聚合ε－己内酯和丙交酯刘建飞，沈之茎，孙俊全（浙江大学高分子科学与工程系杭州３１００２７）关键词ε－己内酯，丙交酯，稀土乙酰丙酮盐，开环聚合聚己内酯和聚丙交酯具有良好的生物相容性，在生物医药领域有广泛用途，因而丙交酯和己内酯的催化开...     

乙酰基丙酮络合物催化合成聚乳酸

以钕、钇、锌、铁、钴、镍六种乙酰基丙酮盐Ｍ（ＡｃＡｃ）ｎ成功地催化丙交酯开环聚合成聚乳酸。详细研究了上述乙酰基丙酮盐催化剂品种及其与单体摩尔比［Ｍ（ＡｃＡｃ）ｎ］／［ＬＡ］、温度和时间对聚合反应的影响。结果表明，使用这些催化剂都能得到高于９０％的高聚合转化率；而稀土催化剂在聚合转化率和聚乳酸分子量方面，均显示更好的催化性能；过高的聚合温度和过长的聚合时间会导致聚乳酸的分子量下降。Ｘ－衍射研究表明，以Ｎｄ（ＡｃＡｃ）３催化合成的聚乳酸为非晶聚合物。     

甲基丙烯酸丁酯的Nd（Oct）3—Al（i—Bu）3配合催化聚合

甲基丙烯酸丁酯(BMA)在2-乙基己酸钕[Nd(Oct)_3]和三异丁基铝[Al(i-Bu)_3]配合催化下的聚合反应结果表明。以正己烷和石油醚为溶剂的聚合转化率高于甲苯和四氢呋喃体系。4种不同配体的钕盐的聚合转化率差别不大。但是,以Nd(Oet)_3-Al(i-Bu)_3为催化剂时聚甲基丙烯酸丁酯的分子量最高。聚合反应速度与单体浓度和催化剂浓度均成一次方关系。甲基丙烯酸丁酯的聚合反应活化能为47.40kJ/mol。     

RING-OPENING POLYMERIZATION OF ε-CAPROLACTONE BY LANTHANOCENE CATALYSIS*

Ring-opening polymerization of ε-caprolactone (CL) catalyzed bylanthanocenes, O(C_2H_4C_5H_3CH_3)_2YCl (Cat-YCl) and Me_2Si[(CH_3)_3SiC_5H_3]_2NdCl(Cat-NdCl) has been carried out for the first time. It has been found that both yttroceneand neodymocene are very efficient to catalyze the polymerization of CL, giving high molec-ular weight poly (ε-caprolactone) (PCL ). The effects of [cat] / [ε- CL] molar ratio, polymeriza-tion temperature and time, as well as solvents were investigated and polymerization tem-perature is found to be the most important factor affecting the polymerization. The bulkpolymerization gives higher molecular weight PCL and higher conversion than that in solu-tion polymerization. NaBPh_4 was found to promote the polymerization of ε-caprolactone,and thus to increase both the polymerization conversion and MW of poly (ε- caprolactone ).     

Ln（acac）_3／BuMgCl催化聚合甲基丙烯酸甲酯、环氧丙烷和ε－己内酯

Ｌｎ（ａｃａｃ）_３／ＢｕＭｇＣｌ催化聚合甲基丙烯酸甲酯、环氧丙烷和ε－己内酯孙俊全（浙江大学高分子科学与工程系杭州３１００２７）关键词甲基丙烯酸甲酯，环氧丙烷，ε－己内酯，稀土化合物，格氏试剂，配位催化剂，聚合反应在开拓稀土配位聚合反应的研究中，已?..