基于激光多普勒测振仪的透明固体二维动态应力场测量

基于激光多普勒测振仪的透明固体二维动态应力场测量     

Extraction of uranium in caustic sludge from the production of nuclear fuel components by countercurrent dissolution and acid curing

Journal of Radioanalytical and Nuclear Chemistry - The uraniferous caustic sludge (UCS) produced in the production of uranium fuel components was hardly to leach directly, due to its very low-grade...     

Effects of non-smooth characteristics on bionic bulldozer blades in resistance reduction against soil

The phenomenon of soil adhesion occurs widely when terrain machines and construction machines work; this adhesion increases their working resistance. Bionics is one of the most effective methods to reduce resistance against soil. Several non-smooth convex form bulldozer blades were tested to study the effects of non-smooth characteristics on resistance reduction against soil. Under the same soil and test conditions, the draft forces of different non-smooth samples were obtained, and were lower than those of smooth samples. The sample with largest convex base diameter had the lowest draft force. The experiments with smooth and non-smooth samples were repeated to observe soil adhesion and test resistance. A minimum amount of soil adhered to the surface of the non-smooth sample, and the draft force varied smoothly. The smooth sample was different in soil adhesion and draft force.     

Light field characteristics of reflective thin-films irradiated by femtosecond laser pulses

The formation of interference field in optical thin-films is a process of unsteady state when irradiated by femtosecond pulses. Based on the methods of plane-wave decomposition and the using of thin-film characteristic matrix, the model is presented focusing on the issues of mirror reflectance and internal light field in femtosecond timescale. The numerical results reveal that with the decrease of the pulse width a reduction of reflection performance occurs. In addition, the traditional approach that simplifies the incident femtosecond pulse to monochromatic continuous wave cannot get the exact value of the light field magnitude and the temporal profile of ultrashort laser pulse should be taken into account to reach more accurate results.     

Vibration characteristics of aluminum surface subjected to ultrasonic waves and their effect on wetting behavior of solder droplets

The vibration characteristics of an aluminum surface subjected to ultrasonic waves were investigated with a combination of numerical simulation and experimental testing. The wetting behavior of solder droplets on the vibrating aluminum surface was also examined. The results show that the vibration pattern of the aluminum surface is inhomogeneous. The amplitude of the aluminum surface exceeds the excitation amplitude in some zones, while the amplitude decreases nearly to zero in other zones. The distribution of the zero-amplitude zones is much less dependent on the strength of the vibration than on the location of the vibration source. The surface of the liquid solder vibrates at an ultrasonic frequency that is higher than the vibration source, and the amplitude of the liquid solder is almost twice that of the aluminum surface. The vibration of the surface of the base metal (liquid solder) correlates with the oxide film removal effect. Significant removal of the oxide film can be achieved within 2 s when the amplitude of the aluminum surface is higher than 5.4 μm or when the amplitude of the liquid solder surface is higher than 10.2 μm.     

羧酸衍生物取代甲基苯基聚硅烷制备杂取代聚硅烷

以甲基苯基聚硅烷　(PhSiMe　) n为原料 ,在无水AlCl3 存在下 ,通过与酰氯、酸酐及酯的取代反应合成了氯代聚硅烷及一系列共聚物 .在乙酰氯的作用下 ,　(PhSiMe　) n上的苯基能够被近乎完全的取代而生成氯代聚硅烷 .一元酸酐 (乙酸酐和丙酸酐 )在用酰氧基部分取代聚硅烷上苯基的同时 ,进行得更多的还是Cl取代 .而顺丁烯二酸酐、邻苯二甲酸酐和乙酸乙酯则只进行不完全的Cl取代 ,根据分子活性的不同得到取代比率各不相同的共聚物 .初步分析了各反应的过程 ,讨论了影响反应的因素 ,同时对于各产物的荧光和紫外特性也进行了分析和讨论     

Wavelength dependent damage thresholds of a bandpass filter under femtosecond laser irradiation

Laser induced damage thresholds of a bandpass filter with TiO₂/SiO₂ coatings are measured, with the laser delivering wavelength tunable, high-repetition rate, and ultrashort pulses. The multiple wavelengths are selected within the transitional region between the filter passband and stopband. A method that scans the sample along the focused laser beam is employed to vary the spot size on the coating and, consequently, change the fluence. The damage is detected by both a CCD camera and by monitoring the transmitted power simultaneously. During the experiment, an increase in the filter transmission was observed prior to damage occurrence. We demonstrate that damage induced on the coating by the high repetition rate, femtosecond pulses is governed by macroscopic thermal behavior rather than by critical free electron density in the conduction band. In addition, the process of energy deposition is determined by intrinsic nature of the coating materials. Further analysis indicates that the thresholds as a function of wavelength are determined by the combination of the properties of TiO₂, interference field in the coating stack, and thermal effects. Moreover, we attribute the observed increase in the coating transmission to these thermal effects rather than ionization processes.     

1.3μm分布反馈二极管激光器组件

开发了一种用于光纤公用天线电视（ＣＡＴＶ）的分布反馈激光二极管组成，组件包括１．３μｍＩｎＧａＡｓ／ＩｎＰ双沟－平面掩埋双异质结（ＤＣ－ＰＢＨ）分布反馈激光二极管和光隔离器，封装在蝴蝶型管壳内，组件的出纤线性功率为２．５ｍＷ，并具有极低的失真。     

Molecular interactions between pyrazine and n-propanol, chloroform, or tetrahydrofuran

The molecular interactions of pyrazine (PZ) with n-propanol, chloroform, and tetrahydrofuran (THF) have been investigated by employing ultraviolet spectroscopy and quantum chemical calculation methods. A new quantity, excess absorption coefficient, was introduced to represent the strength of the interaction. It was found that the interaction decreased in the order: PZ-propanol>PZ-chloroform>PZ-THF. The Benesi-Hildebrand method indicated that the interaction stoichiometries of the PZ-chloroform and PZ-THF systems were both 1:1 and the equilibrium constants were determined to be 2.07 and 0.64M(-1), respectively. Using a nonlinear fitting method, we demonstrated that the PZ-propanol was a two-step 1:2 interaction pair and the equilibrium constants were determined to be 8.8 and 0.19M(-1). Quantum chemical calculations showed the existence of hydrogen-bonding interactions in all the three system: normal Ncdots, three dots, centeredH-O hydrogen bond in the PZ-propanol system, unconventional Ncdots, three dots, centeredH-C hydrogen bond in the PZ-chloroform, and weak N-C-Hcdots, three dots, centeredO hydrogen bond in the PZ-THF system. Methodologically, we pointed out that special care must be taken when the Benesi-Hildebrand method is used to evaluate 1:2 interactions.