Spectrophotometric Methods for the Determination of Chloramphenicol,Dexamethasone Sodium Phosphate,and Tetrahydrozoline HCl in their Pure and Ophthalmic Dosage Forms

Journal of Applied Spectroscopy - Chloramphenicol (CHL), dexamethasone sodium phosphate (DSP), and tetrahydrozoline HCl (THZ) are co-formulated for conjunctivitis treatment. The ternary mixture...     

A Validated Direct Thin-Layer Chromatographic Separation and Enantioselective Determination of Racemic Centrally Acting Drugs Using Ion-Pair and Ligand-Exchange Chiral Selectors: A Thermodynamic Study of Complexation

JPC – Journal of Planar Chromatography – Modern TLC - A rapid, inexpensive, and stereoselective densitometric—thin-layer chromatographic (TLC) method using l-(+)-tartaric acid and...     

Microsized graphite sensors for potentiometric determination of cyclobenzaprine hydrochloride in pure powder, tablets, and plasma

Two cyclobenzaprine hydrochloride (CZ) microsized graphite selective sensors were investigated with dibutylsebacate as a plasticizer in a polymeric matrix of carboxylated polyvinyl chloride (PVC-COOH) in the case of sensor 1, based on the interaction between the drug and the dissociated COOH groups in the PVC-COOH. Sensor 2 was based on the interaction between the drug and ammonium reineckate, which acted as anionic electroactive material in the presence of polyvinyl chloride matrix. The two sensors were constructed by using 2-hydroxy propyl beta-cyclodextrin as an ionophore, which has a significant influence on increasing the membrane sensitivity and selectivity of both sensors. Fast and stable Nernstian responses of 1 x 10(-5) - 1 x 10(-2) and 1 x 10(-4) - 1 x 10(-2) M for the two sensors, respectively, with slopes of 58.6 and 55.5 mV/decade, respectively, over the pH range 2-4 were obtained. The proposed method displayed useful analytical characteristics for determination of CZ in its pure powder form with average recoveries 99.95 +/- 0.23 and 99.61 +/- 0.34% for sensors 1 and 2, respectively, and in plasma with good recoveries. The sensors were also used to determine the intact drug in the presence of its degradate and, thus, could be used as stability-indicating methods. The obtained results by the proposed methods were statistically analyzed and compared with those obtained by the U.S. Pharmacopeia method; no significant difference for either accuracy or precision was observed. Results obtained with the two electrodes revealed their performance characteristics, which were evaluated according to International Union of Pure and Applied Chemistry recommendations.     

On the Computer Formulations of the Wheel/Rail Contact Problem

In this investigation, four nonlinear dynamic formulations that can be used in the analysis of the wheel/rail contact are presented, compared and their performance is evaluated. Two of these formulations employ nonlinear algebraic kinematic constraint equations to describe the contact between the wheel and the rail (constraint approach), while in the other two formulations the contact force is modeled using a compliant force element (elastic approach). The goal of the four formulations is to provide accurate nonlinear modeling of the contact between the wheel and the rail, which is crucial to the success of any computational algorithm used in the dynamic analysis of railroad vehicle systems. In the formulations based on the elastic approach, the wheel has six degrees of freedom with respect to the rail, and the normal contact forces are defined as function of the penetration using Hertzs contact theory or using assumed stiffness and damping coefficients. The first elastic method is based on a search for the contact locations using discrete nodal points. As previously presented in the literature, this method can lead to impulsive forces due to the abrupt change in the location of the contact point from one time step to the next. This difficulty is avoided in the second elastic approach in which the contact points are determined by solving a set of algebraic equations. In the formulations based on the constraint approach, on the other hand, the case of a non-conformal contact is assumed, and nonlinear kinematic contact constraint equations are used to impose the contact conditions at the position, velocity and acceleration levels. This approach leads to a model, in which the wheel has five degrees of freedom with respect to the rail. In the constraint approach, the wheel penetration and lift are not permitted, and the normal contact forces are calculated using the technique of Lagrange multipliers and the augmented form of the system dynamic equations. Two equivalent constraint formulations that employ two different solution procedures are discussed in this investigation. The first method leads to a larger system of equations by augmenting all the contact constraint equations to the dynamic equations of motion, while in the second method an embedding procedure is used to obtain a reduced system of equations from which the surface parameter accelerations are systematically eliminated. Numerical results are presented in order to examine the performance of various methods discussed in this study.     

A comparative study of liquid and solid inner contact roxatidine acetate ion-selective electrode membranes

A comparative study was conducted using two designs of a roxatidine acetate (ROX)-selective electrode; a conventional liquid inner contact called electrode A and a graphite-coated solid contact called electrode B. The fabrication of electrodes was based on roxatidine-tetraphenylborate (ROX-TPB) as an ion-association complex in a PVC matrix using different plasticizers. Electrode A has a linear dynamic range of 2.2×10-5 mol/L to 1.0×10-2 mol/L, with a Nernstian slope of 54.7 mV/decade and a detection limit of 1.4×10-6 mol/L. Electrode B shows linearity over the concentration range of 1.0×10-6 mol/L to 1.0×10-2 mol/L, with a Nernstian slope of 51.2 mV/decade and a limit of detection of 1.1×10-7 mol/L which is remarkably improved as a result of diminishing ion fluxes in this solid contact, ion-selective electrode. The proposed sensors display useful analytical characteristics for the determination of ROX in bulk powder and its pharmaceutical formulation. The present electrodes show clear discrimination of ROX from several inorganic, organic ions, sugars, some common drug excipients and the degradation product (3-[3-(1-piperidinyl methyl) phenoxy] propyl amine) of ROX. Furthermore, the proposed electrodes were utilized for the determination of ROX in human plasma, where electrode B covers drug Cmax which indicated its applicability to pharmacokinetic, bioavailability and bioequivalent studies. The results obtained by the proposed electrodes were statistically analyzed and compared with those obtained by a reported HPLC method. No significant difference for either accuracy or precision was observed.     

Impurity-profiling UPLC methods for quantitative analysis of some antiemetics formulated with pyridoxine

Cyclizine hydrochloride (CYC) and meclozine hydrochloride (MEC) are antihistaminic drugs generally co-formulated with pyridoxine hydrochloride (PYR) to treat nausea and vomiting in pregnancy. Several analytical techniques have been applied for the determination of CYC or MEC with PYR, but determination of CYC impurity; benzhydrol (BEH) or MEC impurity; or 4-chlorobenzophenone (BEP) has not been paid attention to. Therefore, micellar UPLC method is introduced for analysis of ternary mixtures containing PYR together with both CYC and BEH (mixture I) or MEC and BEP (mixture II). Chromatographic separation was achieved using a Hypersil gold C₈ column (50 × 2.1 mm, 1.9 μm) using 0.01 M sodium dodecyl sulfate modified to pH 3.5 using phosphoric acid:acetonitrile (45:55 by volume) for mixture I and 0.1% sodium dodecyl sulfate, 0.1% sodium bicarbonate adjusted to pH 2.6 by phosphoric acid:acetonitrile (47:53 by volume) for mixture II as mobile phases. The separated peaks were detected at 230 and 245 nm for mixtures I and II, respectively. The adopted methods were validated in conformance with the International Conference on Harmonization (ICH) recommendations and were properly applied in commercial pharmaceutical formulation analysis. Comprehensive ecological comparison was achieved, confirming a higher ecological value of the presented methods compared to the earlier reported methods.     

Spectrophotometric and spectrodensitometric determination of Clopidogrel Bisulfate with kinetic study of its alkaline degradation

Four sensitive, selective and precise stability-indicating methods for the determination of Clopidogrel Bisulfate (CLP) in presence of its alkaline degradate and in pharmaceutical formulations were developed and validated. Method A is a second derivative (D²) spectrophotometric one, which allows the determination of CLP in presence of its alkaline degradate at 219.6, 270.6, 274.2 and 278.4 nm (corresponding to zero-crossing of the degradate) over a concentration range of 4-37 μg mL⁻¹ with mean percentage recoveries 99.81 ± 0.893, 99.72 ± 0.668, 99.88 ± 0.526 and 100.46 ± 0.646, respectively. CLP can be determined in the presence of up to 65% of its degradate. D² method was used to study the kinetic of CLP alkaline degradation that was found to follow a first-order reaction. The t_1/2 was 6.42 h while K (reaction rate constant) was 0.1080 mol/h. Method B is the first derivative of the ratio spectra (DD¹) spectrophotometric method, by measuring the peak amplitude at 217.6 and 229.4 nm using acetonitrile and CLP can be determined in the presence of up to 70% of its degradate. The linearity range was 5-38 μg mL⁻¹ with mean percentage recoveries 99.88 ± 0.909 and 99.70 ± 0.952, respectively. Method C based on the determination of CLP by the bivariate calibration depending on simple mathematic algorithm which provides simplicity and rapidity. The method depends on quantitative evaluation of the absorbance at 210 and 225 nm over a concentration range 5-38 μg mL⁻¹ with mean percentage recovery 99.27 ± 1.115. CLP can be determined in the presence of up to 70% of its degradate. Method D is a TLC-densitometric one, where CLP was separated from its degradate on silica gel plates using hexane:methanol:ethyl acetate (8.7:1:0.3, v/v/v) as a developing system. This method depends on quantitative densitometric evaluation of thin layer chromatogram of CLP at 248 nm over a concentration range of 0.6-3 μg/band with mean percentage recovery 99.97 ± 1.161. CLP can be determined in the presence of up to 90% of its alkaline degradate. The selectivity of the proposed methods was checked using laboratory prepared mixtures. The proposed methods have been successfully applied to the analysis of CLP in pharmaceutical dosage forms without interference from other dosage form additives and the results were statistically compared with the official method.     

Membrane electrodes for determination of some beta-blocker drugs

Five poly(vinyl chloride) (PVC) matrix membrane electrodes responsive to the beta-blockers atenolol (AT), bisoprolol fumarate (BI), timolol maleate (TI), and levobunolol HCl (LV) were developed and characterized. A precipitation-based technique with ammonium reineckate anion as an electroactive material in PVC matrix with AT, BI, TI, and LV cations was used for fabrication of Electrodes 1-4, respectively. Electrode 5 fabrication was based on precipitation of LV cation with tungstophosphate anion as an electroactive material. Fast and stable Nernstian responses at 1 x 10(-2)-1 x 10(-7) M for different beta-blockers over the pH range of 2-8 were found for these electrodes, which were evaluated according to International Union of Pure and Applied Chemistry recommendations. The method was successively applied for the determination of beta-blockers in their pharmaceutical formulations. Validation of the method according to quality assurance standards showed the suitability of the proposed electrodes for use in the quality control assessment of these drugs. The recoveries for the determination of the beta-blocker drugs by the 5 proposed selective electrodes were 100.1 +/- 0.7, 99.9 +/- 0.8, 100.0 +/-1.1, 100.5 +/- 1.1, and 100.6 +/- 0.7% for Sensors 1-5, respectively. Statistical comparison between the results obtained by this method and the official method of the drugs was performed and no significant difference was found.     

Synchronized stability indicating RP-LC methods for determination of metolazone with losartan potassium or spironolactone in presence of their degradation products

Abstract

Two precise and selective stability-indicating RP-LC methods have been developed and validated for simultaneous determination of metolazone in its binary mixture with losartan potassium (method 1) and spironolactone (method 2) in the presence of their degradation products. For method 1, the chromatographic separation was achieved on Kromasil C₁₈ column, the mobile phase consisted of a mixture of 0.1% ortho-phosphoric acid in acetonitrile and 0.1% ortho-phosphoric acid in water (28:72, v/v) pumped at flow rate 2?mL/min and UV detection at 235?nm. Linearity was determined over the concentration range of 2–16µg/mL for metolazone and 40–320µg/mL for losartan potassium. For method 2, chromatographic separation of metolazone and spironolactone was achieved on a Symmetry C₈ column using a mobile phase that consisted of acetonitrile, methanol, and 0.1% ortho-phosphoric in water in gradient mode pumped at a flow rate 1.5?mL/min with programed wavelength detection. Linearity was determined over the concentration range of 2–16µg/mL for metolazone and 20–160µg/mL for spironolactone. The suggested methods were proved to be highly selective, precise and accurate for simultaneous determination of the cited drugs in their combined pharmaceutical dosage form in the presence of their degradation products. The proposed methods were validated in compliance with ICH guidelines.

1. Highlights

2. Synchronized determination of metolazone and co-formulated drugs in presence of their degradation products.

3. Act as a method for screening of metolazone and co-formulated drugs in quality control laboratories.

4. Validation of suggested methods according to ICH guidelines.

5. The pathway of degradation of metolazone under different stress conditions was proposed.