基于视觉辐条图案识别方法的蓝宝石引晶机制研究

工业生产蓝宝石晶体过程中,引晶步骤有着至关重要的地位。引晶必须在温度梯度较小,温度分布趋于稳定的条件下进行。目前,工业生产蓝宝石主要依靠人工经验操控籽晶杆实现引晶操作,但是人工引晶操作的准确性不高会导致成品品质不佳、资源浪费。为此,本文提出一种基于蓝宝石视觉辐条图案识别方法来检测蓝宝石熔体状态自由液面状态,从而实现一种高效率引晶的机制。此方法利用经典骨架化算法细化辐条图案,Harris算子实现特征信息的提取,提取的特征信息放入运动轨迹模型中判断熔体稳定性,分析液面温度分布稳定性从而实现引晶。结果表明,此算法具有有效性,蓝宝石晶体引晶效率大大提高,生产出的成品良率也有提升,可有效指导蓝宝石的工业生产。     

System-size effect on the friction at liquid-solid interfaces

The friction at the liquid-solid interfaces is widely involved in various phenomena ranging from nanometer to micrometer scales. By the molecular dynamic(MD)simulation, the friction properties of liquid-solid interfaces at the molecular level are calculated via the Green-Kubo relation. It is found that the system size will influence the value of the friction coefficient, especially for the solid surfaces with the larger polar charge. The value of the friction coefficient decreases with the increase in the system size and converges at large system sizes. The large polar charge will lead to a significant friction coefficient. However, the diffusion of water molecules on this surface is almost a constant, indicating that the diffusion coefficient seems to be independent of the system size and polar charge. This work provides insights for the selection of the system size in modeling the frictional properties of hydrophobic/hydrophilic surfaces.     

An efficient method for 3,4-dihydroisoquinolinium ion formation,leading to a facile introduction of nucleophiles

The ketene silyl acetal derived from ethyl 2-benzyltetrahydroisoquinoline-1-carboxylate undergoes a rapid oxidation reaction with N-bromosuccinimide to form 3,4-dihydroisoquinolinium ion, which reacts with Grignard reagents to give 1,1-disubstituted tetrahydroisoquinolines in good yields.     

MB2镁等四种金属材料的本构关系和动态断裂研究

采用炸药爆轰－分离飞片加载装置与电容传感技术相结合，由高速示波器连续记录靶板自由面速度剖面，通过波剖面的时间分辨测量，研究了ＭＢ＿２镁、ＬＹ－１２铝、钨合金、２１６９钢四种金属材料的动力学响应特性，给出了这几种材料在弹性－理想塑性模型假设下的本构关系，还给出了它们的动态断裂强度，并对标准化层裂强度与破坏比功、屈服强度之间的相关性进行了分析和讨论。     

High Correlation between Oxidation Loci on Graphene Oxide

Recent experiments have shown the coexistence of both large unoxidized and oxidized regions on graphene oxide (GO), but the underlying mechanism for the formation of the GO atomic structure remains unknown. Now, using density functional calculations, 52 oxidation pathways for local pyrene structures on GO were identified, and a kinetic profile for graphene oxidation with a high correlation between oxidation loci was proposed, which is different from the conventional view, which entails a random distribution of oxidation loci. The high correlation is an essential nature of graphene oxidation processes and can be attributed to three crucial effects: 1) breaking of delocalized π bonds, 2) steric hindrance, and 3) hydrogen‐bond formation. This high correlation leads to the coexistence of both large unoxidized and oxidized regions on GO. Interestingly, even in oxidized regions on GO, some small areas of sp²‐hybridized domains, similar to “islands”, can persist because of steric effects.     

Optimal proportional reinsurance and investment based on Hamilton-Jacobi-Bellman equation

In the whole paper, the claim process is assumed to follow a Brownian motion with drift and the insurer is allowed to invest in a risk-free asset and a risky asset. In addition, the insurer can purchase the proportional reinsurance to reduce the risk. The paper concerns the optimal problem of maximizing the utility of terminal wealth. By solving the corresponding Hamilton-Jacobi-Bellman equations, the optimal strategies about how to purchase the proportional reinsurance and how to invest in the risk-free asset and risky asset are derived respectively.     

高效液相色谱法测定强化食品中维生素C的含量

建立了强化食品(饮料、奶粉、含乳饮料、大米、果泥及果冻)中维生素C含量的高效液相色谱检测方法。优化了样品处理方法,在水浴控温和避光条件下处理样品,避免维生素C被氧化。选用Tech Mate C18–ST(250 mm×4.6 mm,5μm)反相色谱柱,以0.05 mol/L磷酸二氢钾缓冲溶液(p H 3)为流动相,流量为1.0m L/min,检测器为光电二极管阵列检测器,检测波长为266 nm。线性范围为0.2~100μg/m L,相关系数为0.999 6,果泥中维生素C的定量限为20 mg/kg,其它为100 mg/kg,加标回收率为82.2%~107%,测定结果的相对标准偏差为1.23%~6.86%(n=8)。该方法简单快速,其灵敏度、准确度和精密度均能满足强化食品中维生素C的检测要求。     

Designing a deep-UV nonlinear optical monofluorophosphate

Science China Chemistry - As structural variants of famous hexagonal tungsten bronzes, hexagonal tungsten oxides (HTO) represent an important family with fascinating functional properties, such as...     

Proportional and excess-of-loss reinsurance under investment gains

On the assumption that investment fund follows the logarithm-normal distribution, the paper derives the forms of proportional and excess-of-loss reinsurance contracts which make the convex combination of the insurer’s rate of return v₁ and the reinsurer’s rate of return v₂ exceeds R at the probability of f. In the whole paper, the premium takes the expectation principle.     

Branched polymer via free radical polymerization of chain transfer monomer: A theoretical and experimental investigation

A simple mathematic model for the free radical polymerization of chain transfer monomers containing both polymerizable vinyl groups and telogen groups was proposed. The molecular architecture of the obtained polymer can be prognosticated according to the developed model, which was validated experimentally by homopolymerization of 4‐vinyl benzyl thiol (VBT) and its copolymerization with styrene. The chain transfer constant (C_T) of telogen group in a chain transfer monomer is considered to play an important role to determine the architecture of obtained polymer according to the proposed model, either in homopolymerization or copolymerization. A highly branched polymer will be formed when the C_T value is around unity, while a linear polymer with a certain extent of side chains will be obtained when the C_T value is much bigger or smaller than unity. The C_T of VBT was determined to be around 15 by using the developed model and ¹H NMR monitored experiments. The obtained poly(VBT) and its copolymers were substantiated to be mainly consisted of linear main chain with side branching chains, which is in agreement with the anticipation from the developed model. The glass transition temperature, number average molecular weight, and its distribution of those obtained polymer were primarily investigated. This model is hopefully to be used as a strategy to select appropriate chain transfer monomers for preparing hyperbranched polymers. © 2008 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 46: 1449–1459, 2008