Structure and Mechanical Stability of Epoxy Modified Polyurethane Foam Under Heat and Stress

A series of phenolic epoxy resin (PEP) modified polyurethane foams (PUF) were prepared via an in-situ polymerization, one step process. It was found that the epoxy modified PUF foam exhibited a perforated network structure with larger cell size, higher open cell porosity and enhanced ovality compared with pure PUF. With increasing content of PEP, the tensile strength, elongation at break and low temperature modulus of PUF decreased. A single T_g was observed for PEP modified PUF, indicating that the two component phases of the polyurethane-epoxy were miscible. With increasing PEP content, the T_g of PUF shifted slightly to higher temperature, tan δ_max dropped to lower values, and the retention value of the storage modulus at ?20 and ?10?°C increased. For pure PUF, the cell walls degraded and the structure became disordered after aging under heat and stress, while for PUF/20wt%PEP, the degradation degree was obviously reduced, and an orientation of the cells along the stress direction and a density increase was observed. During aging at 200?°C, the retention of the mechanical properties of PUF/20wt% PEP was much higher than that of pure PUF, and it showed superior stability under heat and stress, attributed to incorporation of the thermally resistant oxazolidone rings and benzene rings in the PU backbones, the highly cross-linked networks of the polyurethane-epoxy systems and the obvious orientation of the cells under stress.     

Hydrogen dangling bonds induce ferromagnetism in two-dimensional metal-free graphitic-C3N4 nanosheets

Ferromagnetic two-dimensional (2D) ultrathin nanosheets hold great promise for next generation electronics. Ferromagnetic metal-free materials that usually possess only an s/p electronic configuration with weak spin–orbit coupling and a large spin relaxation time, would play an important role in constructing future spintronic devices. However, the absence of an intrinsic spin ordering structure in most metal-free materials greatly hampers the widening scope of ferromagnetic 2D nanostructures as well as in-depth understanding of their ferromagnetic nature. Herein, the induction of intrinsic ferromagnetism in 2D metal-free g-C₃N₄ ultrathin nanosheets has been achieved through a new effective strategy whereby hydrogen dangling bonds are introduced. In our case, g-C₃N₄ ultrathin nanosheets with hydrogen dangling bonds showed obvious room temperature ferromagnetic behavior that could even be tuned by the concentration of hydrogen. This work will pave a new pathway to engineer the properties of 2D nanomaterial systems.     

试飞数据分析结果的可视化输出软件设计与实现

针对试飞数据分析结果进行可视化输出可以提高试飞科目的评判效率。将试飞数据分析结果进行结构化存储,采用列模式内存对齐方式,提高单个参数的检索查询及图形输出操作效率;对C+ builder标准组件类属性及方法进行扩充,实现对常规和特殊定制结果曲线图的绘制导出;利用进程调用方式,融合Matlab平台GUI应用程序和算法库,扩展软件交互功能。以实现对试飞数据分析结果的可视化输出。     

Negative slope of resistivity–temperature curve and positive magnetoresistance in antiperovskite ZnCNi3−x Mn x (1.15≤x≤1.5)

In antiperovskite intermetallics ZnCNi_3?x Mn _x , the negative slope coefficient (NSC) dρ/dT of resistivity–temperature curves is observed when x=1.15,1.25,1.4,1.5. The sample with x=1.25 shows a semiconductor-like behavior in the whole temperature range of 15–290 K. By study of the magnetization, magnetoresistance, and low-temperature X-ray diffraction, it is found that Mn dopant significantly affects the physical properties of ZnCNi_3?x Mn _x by changing both the carrier density and the magnetism. The origin of the NSC dρ/dT can be ascribed to the change of hole-like carrier density, which is adjusted by Mn content. The existence of hole-like carriers can be understood rationally by the two-band model. The change of sign of magnetoresistance from positive to negative has been observed in ZnCNi_3?x Mn _x with the change of Mn content, which could be ascribed to the competition between the contribution from field-induced suppression of the thermally excited ferromagnetic spin fluctuations and the Lorentz contribution. When Mn content is low, the Lorentz contribution dominates the sign of magnetoresistance. On the other hand, when Mn content is high, the contribution from field-induced suppression of the thermally excited ferromagnetic spin fluctuations dominates the sign of magnetoresistance.     

Development of a Novel Process of Corrosion Rate Estimation of Steel under Stray Current Interference: Q235A Pipe Steel as an Example

Russian Journal of Electrochemistry - With the progress of urbanization, stray current corrosion has attracted numerous attention due to its safety threaten to buried metallic pipelines around the...     

Effect of Manganese Valence on Specific Capacitance in Supercapacitors of Manganese Oxide Microspheres

Manganese oxides have attracted great interest in electrochemical energy storage due to high theoretical specific capacitance and abundant valence states. The multiple valence states in the redox reactions are beneficial for enhancing the electrochemical properties. Herein, three manganese microspheres were prepared by a one-pot hydrothermal method and subsequent calcination at different temperatures using carbon spheres as templates. The trivalent manganese of Mn₂O₃ exhibited multiple redox transitions of Mn³⁺/Mn²⁺ and Mn⁴⁺/Mn³⁺ during the intercalation/deintercalation of electrolyte ions. The possible redox reactions of Mn₂O₃ were proposed based on the cyclic voltammetry and differential pulse voltammogram results. Mn₂O₃ microsphere integrated the advantages of multiple redox couples and unique structure, demonstrating a high specific capacitance and long cycling stability. The symmetric Mn₂O₃//Mn₂O₃ device yielded a maximum energy density of 29.3 Wh kg⁻¹ at 250 W kg⁻¹.     

Direct electrochemistry of hemoglobin on graphene/Fe3O4 nanocomposite-modified glass carbon electrode and its sensitive detection for hydrogen peroxide

Graphene/Fe₃O₄ nanocomposite was prepared for the immobilization of hemoglobin (Hb) to improve the electron transfer between Hb and glass carbon electrode (GCE). The characterization of nanocomposites was described by transmission electron microscopy, Fourier transform infrared, Raman spectroscopy, and X-ray photoelectron spectroscopy, respectively. The electrochemistry of Hb on the graphene/Fe₃O₄-based GCE was investigated by cyclic voltammetry and amperometric measurement. The modified electrode showed a wide linear range from 0.25 μmol/L to 1.7 mmol/L with a correlation coefficient of 0.9967. The detection limit of the H₂O₂ biosensor was estimated at 6.0?×?10^?6?mol/L at a signal-to-noise ratio of 3.     

不动杆菌静息细胞催化拆分外消旋环戊酮醇乙酸酯反应条件的优化

 考察了反应条件对不动杆菌Acinetobactersp．YQ231催化外消旋环戊酮醇乙酸酯对映选择性水解的反应速度和对映选择性的影响．确定的最佳酶反应条件为pH8．0，温度50℃．不同乳化剂对对映选择性的影响不同，以壬基酚聚氧乙烯醚的效果最好，当其加入量为15g／L时，反应的对映选择性最高．产物环戊酮醇对酶活性有显著的抑制作用．细胞中的酯酶优先水解（R）－环戊酮醇乙酸酯，生成（R）－环戊酮醇，在底物浓度为250mmol／L时，对映体比率（E值）可达50．     

Separation and determination of lignans from seeds of Schisandra species by micellar electrokinetic capillary chromatography using ionic liquid as modifier

In this paper, a micellar electrokinetic chromatographic (MEKC) method using ionic liquid as modifier for the quantification of the active components of lignans found in the medicinal herbs Schisandra species was developed for the first time. Preliminary investigations employing sodium dodecyl sulfate (SDS) as surfactant did not lead to the necessary resolution of the studied compounds, the addition of ionic liquid 1-butyl-3-methylimidazolium tetrafluoroborate (BMIM-BF4) to the SDS micellar system resulted in the complete separation of all the compounds. The effects on the separation by several parameters such as BMIM-BF4 and SDS concentration, applied voltage, background electrolyte pH and concentration, were evaluated. Under the optimal conditions (5 mM borate-5 mM phosphate buffer in the presence of 20 mM SDS and 10 mM BMIM-BF4, pH 9.2, applied voltage 25 kV and detection at 254 nm), the method successfully applied to the determination of lignans in extracts of Schisandra chinensis (Turcz.) Baill. and Schisandra henryi C.B. Clarke in less than 13 min. The separation mechanism was also discussed.     

Synthesis, structure, and catalytic activity of rhodium complexes with new chiral binaphthyl-based NHC-ligands

Three new chiral NHC-rhodium complexes have been prepared from the reactions between [Rh(COD)Cl]₂, NaOAc, KI, and dibenzimidazolium salts 3, 4 or 5, which are derived from (S)-2,2′-diamino-1,1′-binaphthyl. The steric and electronic effects of the ligand play an important role in the complex formation. For example, treatment of pyridine substituted dibenzimidazolium salts 3 or 4 with 0.5 equiv of [Rh(COD)Cl]₂ in the presence of NaOAc and KI in CH₃CN at 85 °C gives the chiral Rh(III) complexes 6 and 7, respectively. However, under similar reaction conditions, pyridine-N-oxide substituted dibenzimidazolium salt 5 affords a binuclear Rh(I) complex 8. All compounds have been characterized by various spectroscopic techniques, and elemental analyses. The solid-state structures of compounds 4-8 have been further confirmed by X-ray diffraction analyses. Rhodium complexes 6-8 show good catalytic activity for the asymmetric hydrosilylation of acetophenone with moderate ee values.