A CO Adsorption Site Change Induced by Copper Substitution in a Ruthenium Catalyst for Enhanced CO Oxidation Activity

Ru is an important catalyst in many types of reactions. Specifically, Ru is well known as the best monometallic catalyst for oxidation of carbon monoxide (CO) and has been practically used in residential fuel cell systems. However, Ru is a minor metal, and the supply risk often causes violent fluctuations in the price of Ru. Performance‐improved and cost‐reduced solid‐solution alloy nanoparticles of the Cu‐Ru system for CO oxidation are now presented. Over the whole composition range, all of the Cu_xRu_1?x nanoparticles exhibit significantly enhanced CO oxidation activities, even at 70 at % of inexpensive Cu, compared to Ru nanoparticles. Only 5 at % replacement of Ru with Cu provided much better CO oxidation activity, and the maximum activity was achieved by 20 at % replacement of Ru by Cu. The origin of the high catalytic performance was found as CO site change by Cu substitution, which was investigated using in situ Fourier transform infrared spectra and theoretical calculations.     

Biobased poly(2,5‐furandimethylene succinate‐co‐butylene succinate) crosslinked by reversible Diels–Alder reaction

We synthesized biobased poly(2,5‐furandimethylene succinate‐co‐butylene succinate) [P(FS‐co‐BS)] copolymers by polycondensation of 2,5‐bis(hydroxymethyl)furan, 1,4‐butanediol, and succinic acid. These copolymers could be crosslinked to form network polymers by means of a reversible Diels–Alder reaction with bis‐maleimide. The thermal properties, mechanical properties, and healing abilities of the P(FS‐co‐BS)s and the network polymers were investigated. The mechanical properties of the network polymers depended on the comonomer composition of the P(FS‐co‐BS)s and the maleimide/furan ratio in the network polymers. Some of the copolymers exhibited healing ability at room temperature, and their healing efficiency was enhanced by solvent or heat. © 2013 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2014 , 52, 216–222     

Formation of Hierarchical Lamellae‐in‐Lamella Nanostructures from Polymer Blends Via Controlled Nonequilibrium Freezing

The creation of hierarchical nanostructures in polymeric materials has been intensively studied due to the great potential to tailor their physicochemical properties. Although much success has been achieved over the past decades in block copolymers, hierarchical structure engineering in polymer blends remains a great challenge. Here, the formation of hierarchical lamellae‐in‐lamella nanostructures from polymer blends via controlled nonequilibrium freezing is reported. Polymer blends are first dissolved in molten hexamethylbenzene (HMB) to form a homogeneous melt. When cooled to below its melting temperature, the HMB is crystallized and depleted, and the polymers are directionally solidified. This process is rapid enough that phase separation of the polymer blends is kinetically trapped at the nanoscale level. Then, the polymer blend epitaxially crystallizes onto the HMB inside the nanophase, resulting in the hierarchical lamellae‐in‐lamella structure. This structure is stable under ambient conditions and tunable depending on the annealing temperature and blending ratio.

     

Incipient structural and vibrational relaxation process of photolyzed carbonmonoxy myoglobin: statistical analysis by perturbation ensemble molecular dynamics method

The incipient structural and vibrational energy relaxation process of photolyzed carbonmonoxy myoglobin was analyzed by the perturbation ensemble molecular dynamics (PEMD) method, in which many pairs of perturbed and unperturbed MD simulations are executed for ensemble-averaging to obtain statistically significant results by canceling out thermal fluctuations. First, we have shown that the experimentally reported anisotropic expansion can be detected within a picosecond after photolysis. The good agreement between the experimental and computational results indicates that the PEMD method can predict legitimately those changes driven by perturbations even if the changes might be subtle and smaller than thermal fluctuations. Second, the structural relaxation including the ??clamshell rotation?? in E and F helices was successfully analyzed. The high time resolution analysis has clarified the incipient structural dynamics on a subpicosecond timescale: the clamshell rotation starts at His64, Val68, and His93 following both the heme doming and the dissociated CO ligand collision. Third, the vibrational energy relaxation from the heme to the globin matrix is elucidated not only temporally but also spatially. This is the first ??thorough?? report of the spacetime-resolved excess kinetic energy redistribution of photolyzed MbCO in the globin matrix with a statistically significant precision, ±1?K. The incipient anisotropic vibrational relaxation occurs clearly within a picosecond in the direction perpendicular to the heme plane by the ??through-bond?? and ??through-projectile?? pathways, and the isotropic relaxation then follows by the ??through-space?? pathway. Finally, it is concluded that the PEMD method is a powerful tool to understand the incipient relaxation process driven by the perturbation.     

Development of a certified reference material for the determination of perfluorooctanoic acid

A certified reference material (CRM) for the determination of perfluorooctanoic acid (PFOA) has been issued as NMIJ CRM 4056-a by the National Metrology Institute of Japan, National Institute of Advanced Industrial Science and Technology (NMIJ/AIST). Purity (kg kg^?1) based on a titration method was determined by subtracting the mass fractions of impurities measured using liquid chromatography/mass spectrometry (LC/MS) from those of acids expressed as PFOA measured by a neutralization potentiometric titration. To validate an obtained result, purity based on a mass balance method was determined by subtracting the mass fractions of impurities, measured using LC/MS, Karl-Fischer titration (KFT), and vacuum evaporation, from 1 kg kg^?1. Results from both titration and mass balance methods were in agreement within the accepted limits of uncertainty. The certified purity of NMIJ CRM 4056-a was determined to be 0.959 kg kg^?1, calculated as the mean of the results obtained with the two methods. The standard uncertainty of the certified purity was evaluated from purity evaluations as well as from sample homogeneity and stability obtained from LC/MS and KFT analyses. Consequently, the expanded uncertainty was estimated to be 0.005 kg kg^?1 with a coverage factor of k = 2.     

Ion-exchange resin decomposition in supercritical water

Abstract

Using supercritical water oxidation, the cation exchange resin was decomposed fast and completely to water, carbon dioxide and sulfuric acid. While the resin decomposition yield increased with the reaction time and the amount of hydrogen peroxide added as oxidizing agent, it was constant in the resin concentration from 0.14 to 1.9 dry resin weight percent to water. More than 99% of the cation exchange resin was decomposed with hydrogen peroxide added in the amount of 7 times the stoichiometric value at 673 K and 30MPa for 30 minutes of the reaction time. The cation exchange resin is decomposed through two main reaction pathways. One has a rate controlling intermediate such as acetic acid whose decomposition rate was very slow, and the other does not have stable intermediates. The decomposition of the acetic acid is a significant factor for the complete decomposition of the resin, although it does not dominate the whole resin decomposition. A simple kinetic model that estimates the resin decomposition yield was developed.     

Intersecting brane models and F-theory in six dimensions

We analyze six-dimensional supergravity theories coming from intersecting brane models on the toroidal orbifold T⁴/_Z2$T^4/{\mathbb{Z}}_2$. We use recently developed tools for mapping general 6D supergravity theories to F-theory to identify F-theory constructions dual to the intersecting brane models. The F-theory picture illuminates several aspects of these models. In particular, we have some new insight into the matter spectrum on intersecting branes, and analyze gauge group enhancement as branes approach orbifold points. These novel features of intersecting brane models are also relevant in four dimensions, and are confirmed in 6D using more standard Chan–Paton methods.     

The anomalous behaviour of Gd atoms (Fe1−xMnx)2 compounds

The educed Gd atoms in the X-structure (Th₆Mn₂₃-type) of Gd(Fe_1−xMn_x)₂ were magnetically investigated by comparing with Gd₆(Fe_1−yMn_y)₂₃ whose structure is Th₆Mn₂₃-type. The magnetic properties of Gd(Fe_1−xMn_x)₂ (0.4≤x≤0.7) were observed to be quite similar to those of Gd₆(Fe_1−yMn_y)₂₃ (0.4≤y≤0.7).