Chiral recognition and separation of beta2-amino acids using non-covalently molecularly imprinted polymers

Non-covalently molecularly imprinted polymers (MIPs) for beta2-amino acids were prepared for the first time. N-(2-chlorobenzyloxycarbonyl)-(R)-beta2-homophenylalanine (N-2-ClZ-(R)-beta2-HPhe) was imprinted with methacrylic acid (MAA) and/or 4-vinylpyridine (4-VPy) as the functional monomers, with ethylene glycol dimethacrylate (EDMA) as the cross-linker. The MIPs made with different ratios of MAA:4-VPy were studied in HPLC mode. The results show that MIPs made with 4-VPy yielded the best chiral separation factor (alpha= 1.86) for the template molecule. The importance for an efficient separation of pi-stacking interactions between the MIPs and the template molecule is demonstrated. Racemates of Z-alpha-amino acids and beta-amino acid analogues of the template were either not or poorly resolved by the MIPs, thus demonstrating the close three-dimensional complementarity of the MIPs' recognition sites with the template.     

Soluble factor from tumor cells induces heme oxygenase-1 by a nitric oxide-independent mechanism in murine peritoneal macrophages

Tumor target-derived soluble secretary factor has been known to influence macrophage activation to induce nitric oxide (NO) production. Since heme oxygenase-1 (HO-1) is induced by a variety of conditions associated with oxidative stress, we questioned whether soluble factor from tumor cells induces HO-1 through NO-dependent mechanism in macrophages. We designated this factor as a tumor-derived macrophage-activating factor (TMAF), because of its ability to activate macrophages to induce iNOS. Although TMAF alone showed modest activity, TMAF in combination with IFN-gamma significantly induced iNOS expression and NO synthesis. Simultaneously, TMAF induced HO-1 and this induction was slightly augmented by IFN-gamma. Surprisingly, however, induction of HO-1 by TMAF was not inhibited by the treatment with the highly selective iNOS inhibitor, 1400 W, indicating that TMAF induces the HO-1 enzyme by a NO-independent mechanism. While rIFN-gamma alone induced iNOS, it had no effect on HO-1 induction by itself. Collectively, the current study reveals that soluble factor from tumor target cells induces HO-1 enzyme in macrophages. However, overall biological significance of this phenomenon remains to be determined.     

Fabrication and sensing property for conducting polymer nanowire-based biosensor for detection of immunoglobulin G

Conducting polymers are excellent sensing materials in the design of bioanalytical sensors because of their electronic conductivity, low energy optical transitions, biocompatibility, and room temperature operation. Among them, Polypyrrole (Ppy) is one of the most extensively used conducting polymers because of a number of properties such as redox activity, rapid electron transfer, and ability to link a variety of biomolecules to pyrrole groups by chemical treatment. In this study, Ppy nanowires were synthesized by an electrospinning method. The nanowires were prepared from a solution mixture of Ppy and poly(ethylene oxide). The method of detection in such a device is based on the selective binding of antigen onto an antibody that is covalently attached to the nanowires. Thus, anti-IgG was immobilized on Ppy nanowires using an EDC {[N-(3-dimethyl aminopropyl)-N₂-ethylcarbodiimide hydrochloride]}-NHS(N-hydrosuccinimide) modified technique. Fluorescence images of BSA–FITC (fluorescein isothiocyanate labeling of bovine serum albumin) conjugation demonstrated that antibody was functionalized on the Ppy nanowires without non-specific binding and facilitated selective detection of antigen. Current–voltage (I–V) characterization was used to monitor the change in the conductivity of nanowires while the specific binding interaction occurred. These results of electrical properties enable Ppy nanowire-based biosensors to detect biomolecules in real-time.     

Investigation of the redox property of a metalloprotein layer self-assembled on various chemical linkers

Myogloblin, a well-known metalloprotein, was immobilized on a gold surface using various chemical linkers to investigate the length effect of chemical linker on the electron transfer in protein layers, because chemical linkers play roles in the pathway that transfers the electron from the protein to the gold substrate and act as protein immobilization reagents. Chemical linkers with 2, 6, 11, and 16 carbons were utilized to confirm length-effects. The immobilization of protein and chemical linker was validated with surface plasmon resonance (SPR) and atomic force microscopy (AFM). The electrochemical property was evaluated by cyclic voltammetry (CV) and chronocoulometry (CC). In those results, redox peaks of immobilized protein were controlled via the length of chemical linkers, and it could be directly applied to the realization of bioelectronic device.     

Syntheses of new pyridonecarboxylic acid derivatives containing 3-,5- or 6-quinolyl substituents at N-1 and their anti-HIV-RT activities

A series of new pyridonecarboxylic acid derivatives containing 3-, 5- or 6-quinolyl substituents at N-1 were synthesized and their in vitro anti-HIV-RT activities were evaluated. Several compounds in this series showed better activity than Atevirdine.     

Relative DNA binding affinity of helix 3 homeodomain analogues, major groove binders, can be rapidly screened by displacement of prebound ethidium bromide. A comparative study

The binding affinity for a 12-bp dsDNA of Antennapedia helix 3 analogues, major groove binders, has been measured by displacement of prebound ethidium bromide, a fluorescent displacement assay proposed for minor groove binders by Boger et al.(J. Am. Chem. Soc., 2000, 122, 6382-6394). Relative binding affinities determined by this method were compared to those obtained by gel mobility shift and footprinting assays for the 12-bp dsDNA and a 178-bp DNA fragment. The present work demonstrates that the fluorescence displacement assay is suitable for rapid screening of major groove binders, even though about 60 to 70% of the prebound ethidium bromide is displaced by these peptides. Total (100%) displacement of ethidium bromide was serendipitously achieved by addition in the peptide sequence, at the N-terminus, of a S-3-nitro-2-pyridinesulfenyl-N-acetyl-cysteine residue. S-3-nitro-2-pyridinesulfenylcysteine was shown to (i) bind to dsDNA with a micromolar affinity and (ii) direct within DNA grooves a peptide with no affinity for dsDNA.     

Sterically induced shape and crystalline phase control of GaP nanocrystals

We demonstrate a novel synthetic scheme that can be used to control the crystalline phase and shape of GaP semiconductor nanocrystals. Our study shows that steric effects of surfactant ligands can modulate the crystalline phases and control the shapes of nanocrystals. The shape of the nanocrystals obtained varies from zero-dimensional spheres to one-dimensional rods via controlling the ratio between primary and tertiary alkylamines. III-V semiconductors (in our case: GaP) under 10 nm in width are first reported, and unique optical properties due to shape anisotropy are also observed.     

Optimal three-level presort loading of commercial bulk mail in the postal service industry

This study focuses on the presort loading of commercial bulk mail. Here, presort is the process by which a mailer prepares mail such that it is sorted to at least the finest extent required by the postal service provider for a claimed (discounted) price. We formulated this presort loading problem (PLP) as a special case of transportation problem with minimum quantity commitment (MQC) constraints. In addition, we developed a polynomial time optimal solution algorithm for the PLP and performed computational experiments on randomly generated problem instances under various discount structures. Results of the computational experiments show that mailers can potentially reduce their costs by sending mail less frequently, using small-sized mail trays; however, the discount structure does not affect the main results. There is some evidence that smaller cost reductions on mailing fees occur as the variation in the discount rate increases; however, the effects of discount structure are nominal compared with the gains from changing the mailing frequency. Mailing fee savings are more heavily influenced by the discount structure when MQC constraints become tighter.     

A study on the characterization and stability of rhenium(III) chloride-incorporated liposomes

Nanoliposomes are important carriers capable of packaging drugs for various delivery applications through passive targeting tumor sites by enhancing permeability and retention effect. Radiolabeled liposomes have potential applications in radiotherapy and diagnostic imaging. However, the physico-chemical instability of liposomes during manufacturing and storage limits their extensive application. Therefore, considerable numbers of studies have been made on the stability of liposomes over the last few years in order to overcome this problem. In this study, we attempted to prepare polymer-coated liposomes using water-soluble chitosan in order to enhance the stability of rhenium(III) chloride-incorporated liposomes. They were characterized by an electrophoretic light-scattering spectrophotometer, Fourier transform infrared spectroscopy (FT-IR), UV–Vis spectrometer, and phase-contrast microscopy. The chitosan-coated liposomes are spherical and the particle size is about 800–850 nm. Incorporation of chitosan into the liposome bilayer decreased rhenium(III) chloride release from the liposome due to an increased rigidity of the liposome membrane structure. Chitosan-coated liposomes showed a higher stability compared with the stability of non-coated liposomes. The release characteristics of rhenium(III) chloride encapsulated in the liposome were taken as a measure of stability of the liposome membrane.     

Evaluation of tailored magnetic composite films for near-field electromagnetic noise suppression

The effects of permeability and permittivity of the magnetic nanorods filled in composite films have been studied in the broadband radio-frequency range from 0.5 to 10 GHz on a microstrip line. The transmission power absorption of the composite film on a microstrip line was simulated using 3D FEM HFSS program. The model of microstrip line was designed based on IEC standard (IEC 62333-2). The permeability of composite film with magnetic nanorods could be controlled by the aspect ratio of nanorods. The ferromagnetic resonance frequency and the relative complex permeability with the change of aspect ratio were calculated by the Landau–Lifshitz–Gilbert equation. Given the bulk magnetization of 5 kG, the power loss frequency region has exhibited the 2.5–7 GHz broadband frequency by mixing of nanorods with various aspect ratios from 2 to 10. The permittivity effects have been evaluated by changing the real part of permittivity with a fixed imaginary part value and vice versa. The power losses were increased with the proportional to the imaginary part of permittivity and did not show any significant change with the increment of the real part of permittivity. The conduction electromagnetic noise in near field can be suppressed by controlling complex permeability with various aspect ratios of the magnetic nanorods in the composite.