Flocculation and coalescence of droplets in oil-in-water emulsions formed with highly hydrolysed whey proteins as influenced by starch

The effects of added unmodified amylopectin starch, modified amylopectin starch and amylose starch on the formation and properties of emulsions (4 wt.% corn oil) made with an extensively hydrolysed commercial whey protein (WPH) product under a range of conditions were examined. The rate of coalescence was calculated based on the changes in the droplet size of the emulsions during storage at 20 degrees C. The rates of creaming and coalescence in emulsions containing amylopectin starches were enhanced with increasing concentration of the starches during storage for up to 7 days. At a given starch concentration, the rate of coalescence was higher in the emulsions containing modified amylopectin starch than in those containing unmodified amylopectin starch, whereas it was lowest in the emulsions containing amylose starch. All emulsions containing unmodified and modified amylopectin starches showed flocculation of oil droplets by a depletion mechanism. However, flocculation was not observed in the emulsions containing amylose starch. The extent of flocculation was considered to correlate with the rate of coalescence of oil droplets. The different rates of coalescence could be explained on the basis of the strength of the depletion potential, which was dependent on the molecular weight and the radius of gyration of the starches. At high levels of starch addition (>1.5%), the rate of coalescence decreased gradually, apparently because of the high viscosity of the aqueous phase caused by the starch.     

Design study and heat transfer analysis of a neutron converter target for medical radioisotope production

A worldwide challenge in the near future will be to find a way of producing radioisotopes in sufficient quantity without relying on research reactors. The motivation for this innovative work on targets lies in the accelerator-based production of radioisotopes using a neutron converter target as in the transmutation by adiabatic resonance crossing concept. Thermal analysis of a multi-channel helium cooled device is performed with the computational fluid dynamics code CFX. Different boundary conditions are taken into account in the simulation process and many important parameters such as maximum allowable solid target temperature as well as uniform inlet velocity and outlet pressure changes in the channels are investigated. The results confirm that the cooling configuration works well; hence such a solid target could be operated safely and may be considered for a prototype target.     

Estimating satisfiability

The problem of estimating the proportion of satisfiable instances of a given CSP (constraint satisfaction problem) can be tackled through weighting. It consists in putting onto each solution a non-negative real value based on its neighborhood in a way that the total weight is at least 1 for each satisfiable instance. We define in this paper a general weighting scheme for the estimation of satisfiability of general CSPs. First we give some sufficient conditions for a weighting system to be correct. Then we show that this scheme allows for an improvement on the upper bound on the existence of non-trivial cores in 3-SAT obtained by Maneva and Sinclair (2008) [17] to 4.419. Another more common way of estimating satisfiability is ordering. This consists in putting a total order on the domain, which induces an orientation between neighboring solutions in a way that prevents circuits from appearing, and then counting only minimal elements. We compare ordering and weighting under various conditions.     

Chemoproteomic Discovery of AADACL1 as a Regulator of Human Platelet Activation

1. Download : Download high-res image (288KB)
2. Download : Download full-size image

     

Identification of wild collected mosquito vectors of diseases using gas chromatography–mass spectrometry in Jazan Province,Saudi Arabia

Thirty‐three species of mosquitoes have been reported from the Kingdom of Saudi Arabia. Several of these mosquitoes, Anopheles gambiae Giles s.l., Anopheles stephensi Liston, Culex pipiens Linnaeus, Culex quinquefasciatus Say, Culex tritaeniorhynchus Giles, Stegomyia aegypti (Linnaeus) and Aedimorphus vexans arabiensis (Patton) are known vectors of human and animal diseases. In this study, the cuticular hydrocarbon profiles of eight mosquito species using gas chromatography–mass spectrometry were analyzed. Wild collected fourth‐instar larvae were reared, and single, newly emerged, unfed adult females were used for the analysis. A total of 146–160 peaks were detected from the cuticular extracts by gas chromatography. Repeated analysis of variance (ANOVA) and Tukey HSD Post Hoc test was used to test for quantitative differences in relative hydrocarbon quantity. In addition, a linear regression model was applied using Enter method to determine the diagnostic peaks for the eight mosquito specimens. The ANOVA test indicated that relative peaks were significant (P < 0.05) when selected pairs of peaks were compared. Also, seven compounds showed qualitative differences among the five mosquito vectors tested. The classes of constituents present were n‐alkanes, monomethylalkanes, dimethylalkanes, trimethylalkanes, alkenes, branched aromatic hydrocarbons, aldehydes and esters. These compounds have a carbon chain length ranging from 8 to 18 carbons. The most abundant compound in all adult mosquito specimens was n‐hexylacrylate [retention time (RT) 6.73 min], which was not detected in Cx. pipiens. In Cx. pipiens, the most abundant peak was benzaldehyde (RT 2.98 min). Gas chromatography–mass spectrometry is a suitable method to identify adult mosquitoes, especially from focal areas of public health concern such as Jazan Province, Saudi Arabia. This method allows a wide range of adult collected material to be identified with high accuracy. Copyright © 2013 John Wiley & Sons, Ltd.     

Method development and inter-laboratory comparison about the determination of titanium from titanium dioxide nanoparticles in tissues by inductively coupled plasma mass spectrometry

Nanosized titanium dioxide (TiO₂) is one of the most interesting and valuable nanomaterials for the construction industry but also in health care applications, food, and consumer goods, e.g., cosmetics. Therefore, the properties associated with this material are described in detail. Despite its widespread use, the analytical determination and characterization of nanosized metal oxides is not as straightforward as the comparatively easy-to-detect metallic nanoparticles (e.g., silver or gold). This study presents the method development and the results of the determination of tissue titanium (Ti) levels after treatment of rats with the nanosized TiO₂. Total Ti levels were chosen to evaluate the presence and distribution of TiO₂ nanoparticles. A procedure consisting of incubation with a mixture of nitric acid (HNO₃) and hydrofluoric acid (HF), and heating was developed to digest tissues and TiO₂ nanomaterials in order to determine the total Ti content by inductively coupled plasma mass spectrometry (ICPMS). For the inter-laboratory comparison, altogether four laboratories analyzed the same samples upon digestion using the available ICPMS equipment. A major premise for any toxicokinetic study is the possibility to detect the chemical under investigation in biological samples (tissues). So, the study has to be performed with a dose high enough to allow for subsequent tissue level measurement of the chemical under investigation. On the other hand, dose of the chemical applied should not induce over toxicity in the animal as this may affect its absorption, distribution, metabolism, and excretion. To determine a non-toxic TiO₂ dosage, an acute toxicity study in rats was performed, and the organs obtained were evaluated for the presence of Ti by ICPMS. Despite the differences in methodology and independent of the sample preparation and the ICPMS equipment used, the results obtained for samples with Ti concentrations >4 μg Ti/g tissue agreed well.

Covalently Immobilized Battacin Lipopeptide Gels with Activity against Bacterial Biofilms

Novel antibiotic treatments are in increasing demand to tackle life-threatening infections from bacterial pathogens. In this study, we report the use of a potent battacin lipopeptide as an antimicrobial gel to inhibit planktonic and mature biofilms of S. aureus and P. aeruginosa. The antimicrobial gels were made by covalently linking the N-terminal cysteine containing lipopeptide (GZ3.163) onto the polyethylene glycol polymer matrix and initiating gelation using thiol-ene click chemistry. The gels were prepared both in methanol and in water and were characterised using rheology, Fourier transform infrared (FT-IR) spectroscopy and scanning electron microscopy (SEM). Antibacterial and antibiofilm analyses revealed that the gels prepared in methanol have better antibacterial and antibiofilm activity. Additionally, a minimum peptide content of 0.5 wt% (relative to polymer content) is required to successfully inhibit the planktonic bacterial growth and disperse mature biofilms of P. aeruginosa and S. aureus. The antibacterial activity of these lipopeptide gels is mediated by a contact kill mechanism of action. The gels are non-haemolytic against mouse red blood cells and are non-cytotoxic against human dermal fibroblasts. Findings from this study show that battacin lipopeptide gels have the potential to be developed as novel topical antibacterial agents to combat skin infections, particularly caused by S. aureus.     

Origin of the slow linear viscoelastic response of aqueous foams

We have studied the slow linear viscoelastic response of wet aqueous foams by macroscopic creep compliance measurements, combined to a diffusing-wave spectroscopy investigation of the local dynamics. The data strongly suggest that this rheological response arises from two distinct relaxation mechanisms: The first is due to the coarsening induced bubble rearrangements and governs the steady-state creep; the second results from the interplay between surface tension and surface viscosity of the gas-liquid interfaces and gives rise to a transient relaxation.     

Determination of capsaicin and dihydrocapsaicin in Capsicum fruit samples using high performance liquid chromatography

The aim of the present study was to determine the content of capsaicin and dihydrocapsaicin in Capsicum samples collected from city markets in Riyadh (Saudi Arabia), calculate their pungency in Scoville heat units (SHU) and evaluate the average daily intake of capsaicin for the population of Riyadh. The investigated samples consisted of hot chillies, red chillies, green chillies, green peppers, red peppers and yellow peppers. Extraction of capsaicinoids was done using ethanol as solvent, while high performance liquid chromatography (HPLC) was used for separation, identification and quantitation of the components. The limit of detection (LOD) of the method was 0.09 and 0.10 μg/g for capsaicin and dihydrocapsaicin, respectively, while the limit of quantification (LOQ) was 0.30 and 0.36 μg/g for capsaicin and dihydrocapsaicin, respectively. Hot chillies showed the highest concentration of capsaicin (4249.0 ± 190.3 μg/g) and the highest pungency level (67984.60 SHU), whereas green peppers had the lowest detected concentration (1.0 ± 0.9 μg/g); green peppers, red peppers and yellow peppers were non pungent. The mean consumption of peppers for Riyadh city population was determined to be 15.5 g/person/day while the daily capsaicin intake was 7.584 mg/person/day.