Demonstration of joule-level chirped pulse amplification based on tiled Ti:sapphire amplifier

A novel tiled Ti:sapphire(Ti:S)amplifier was experimentally demonstrated with>1 J amplified chirped pulse output.Two Ti:S crystals having dimensions of 14 mm×14 mm×25 mm were tiled as the gain medium in a four-pass amplifier.Maximum output energy of 1.18 J was obtained with 2.75 J pump energy.The energy conversion efficiency of the tiled Ti:S amplifier was comparable with a single Ti:S amplifier.The laser pulse having the maximum peak power of 28 TW was obtained after the compressor.Moreover,the influence of the beam gap on the far field was discussed.This novel tiled Ti:S amplifier technique can provide a potential way for 100 PW or EW lasers in the future.     

A DFT study on mechanisms of CO2 coupling with propargylic alcohols using alkali carbonates

The mechanisms of CO₂ coupling with the propargylic alcohol using alkali carbonates M₂CO₃ (M = Li, Na, K, Cs) have been investigated by means of density functional theory calculations. The calculations reveal that the target product tetronic acid (TA) is yielded through two stages: (a) the formation of the α-alkylidene cyclic carbonate (αACC) intermediate via Cs₂CO₃-mediated carboxylative cyclization of the propargylic alcohol with CO₂, and (b) the conversion of the αACC intermediate with Cs₂CO₃ to produce the cesium salt of the TA. Since the overall kinetic barriers for the two stages are comparable and affordable, the excellent chemoselectivity to the TA should be primarily originated from the high thermodynamic stability of the cesium salt of the TA. Moreover, relative to the TA, the possibility to yield the by-product acyclic carbonate can be excluded due to the both kinetics and thermodynamic inferiority. This result is different from the organic base-mediated reaction. Alternatively, our calculations predict that CsHCO₃ together generated with the cesium salt of the TA might also be an available mediating reagent for the incorporation of CO₂ with the propargylic alcohol. Compared to other alkali carbonates M₂CO₃ (M = Li, Na, K), the stronger basicity of Cs₂CO₃ and the lower ionic potential of cesium ion can raise the effective concentration of the αACC intermediate, and thus the conversion of the αACC intermediate into the cesium salt of the TA can be achieved with high yield.     

Samarium(II) Monoalkyl Complex Supported by a β-Diketiminato-Based Tetradentate Ligand: Synthesis,Structure, and Catalytic Hydrosilylation of Internal Alkynes

The synthesis and catalytic applications of trivalent rare-earth metal alkyl complexes have been well developed, but the chemistry of divalent rare-earth metal alkyl complexes lagged much behind. Herein, we report the synthesis, structure, and catalytic applications of a samarium(II) monoalkyl complex supported by a β-diketiminato-based tetradentate ligand, [LSmCH(SiMe₃)₂] (L=[MeC(NDipp)CHC(Me)NCH₂CH₂N(Me)CH₂CH₂NMe₂]⁻, Dipp=2,6-(iPr)₂C₆H₃). This complex is synthesized by the salt metathesis reaction of samarium iodide [LSm(μ-I)]₂ and KCH(SiMe₃)₂ in 63 % yield. Its structure is characterized by single-crystal X-ray diffraction, showing a distorted square-pyramid coordination geometry. This samarium(II) monoalkyl complex exhibits high catalytic activity in the hydrosilylation of aryl and methyl-substituted unsymmetrical internal alkynes with secondary hydrosilanes, selectively providing the α-(E) products in high yields.     

甲酸处理对微藻油脂提取的影响

采用易于回收的有机酸处理微藻细胞,以微藻Chlorella protothecoides为原料,系统研究了甲酸处理对微藻油脂提取的影响.结果表明,甲酸能有效破碎微藻细胞,最终油脂得率和脂肪酸甲酯(FAME)得率均与传统无机酸热法相当.甲酸浓度、温度和处理时间对油脂提取有显著影响.当甲酸浓度为88%,液固比为6 m L/g,100℃下处理30 min,Chlorella protothecoides油脂得率为49.2%,FAME得率高达92.1%.甲酸处理提取到的微藻油脂脂肪酸组成与无机酸热法结果无明显区别.Chlorella protothecoides油脂主要含有5种脂肪酸,其中C18∶1含量最高.实验还考察了甲酸处理对Nannochlorum sp和Nannochloropsis oceanic的适用性,结果表明,对于不同微藻原料,甲酸处理提取到的微藻油脂得率和FAME得率均与无机酸热法结果相当.     

Enhanced Crystal Quality of Perovskite via Protonated Graphitic Carbon Nitride Added in Carbon-Based Perovskite Solar Cells

The quality of perovskite layers has a great impact on the performance of perovskite solar cells (PSCs). However, defects and related trap sites are generated inevitably in the solution-processed polycrystalline perovskite films. It is meaningful to reduce and passivate the defect states by incorporating additive into the perovskite layer to improve perovskite crystallization. Here an environmental friendly 2D nanomaterial protonated graphitic carbon nitride (p-g-C\begin{document}$_3$\end{document}N\begin{document}$_4$\end{document}) was successfully synthesized and doped into perovskite layer of carbon-based PSCs. The addition of p-g-C\begin{document}$_3$\end{document}N\begin{document}$_4$\end{document} into perovskite precursor solution not only adjusts nucleation and growth rate of methylammonium lead tri-iodide (MAPbI\begin{document}$_3$\end{document}) crystal for obtaining flat perovskite surface with larger grain size, but also reduces intrinsic defects of perovskite layer. It is found that the p-g-C\begin{document}$_3$\end{document}N\begin{document}$_4$\end{document} locates at the perovskite core, and the active groups -NH\begin{document}$_2$\end{document}/NH\begin{document}$_3$\end{document} and NH have a hydrogen bond strengthening, which effectively passivates electron traps and enhances the crystal quality of perovskite. As a result, a higher power conversion efficiency of 6.61% is achieved, compared with that doped with g-C\begin{document}$_3$\end{document}N\begin{document}$_4$\end{document} (5.93%) and undoped one (4.48%). This work demonstrates a simple method to modify the perovskite film by doping new modified additives and develops a low-cost preparation for carbon-based PSCs.     

反应型次氯酸荧光探针

生物体内的次氯酸是氯离子和过氧化氢(H₂O₂)由髓过氧化物酶(MPO)催化生成的,是生物体内最重要的活性氧(ROS)之一,在生理过程中发挥了至关重要的作用。但是,过量的次氯酸会导致一系列生理疾病,因此有效的识别和检测次氯酸备受研究者们的青睐。与传统检测方法相比,荧光探针具有选择性好、灵敏度高、可实时监测等诸多优势,因此在近年来得到了快速发展。本文主要基于不同的荧光团,综述了近三年次氯酸荧光探针的研究进展及生物应用。     

Effect of surface chemical modification for aluminum hypophosphite with hexa‐(4‐aldehyde‐phenoxy)‐cyclotriphosphazene on the fire retardancy,water resistance,and thermal properties for polyamide 6

The surface chemical modified aluminum hypophosphite (AHP) defined as MAHP was successful prepared through P–H bonds on AHP surface reacted with the aldehyde groups in hexa‐(4‐aldehyde‐phenoxy)‐cyclotriphosphazene made in our lab. The wettability of the flame retardants was evaluated by water contact angle tests, and the water contact angle of the prepared MAHP dramatically increased from 0° for AHP to 145°, which indicated the surface modification made the superhydrophilic AHP into superior hydrophobic MAHP. The prepared MAHP and AHP, respectively, incorporated into polyamide 6 (PA6) matrix to prepare flame retardant PA6 composites and the fire retardancy and thermal degradation behavior of flame retardant PA6 composites were investigated by limiting oxygen index, vertical burning test (UL‐94), cone calorimeter, and thermogravimetric analysis tests. The morphologies and chemical compositions of the char residues for PA6 composites were investigated by scanning electron microscopy and X‐ray photoelectron spectroscopy, respectively. The water resistant properties of flame retardant PA6 composites were evaluated by putting the samples into distilled water at 70°C for 168 hr, and the mechanical properties for flame retardant PA6 composites were investigated by the tensile, flexural, and Izod impact strength tests. The results demonstrated that the PA6/MAHP composites successfully passed UL‐94 V‐0 flammability rating, and the limiting oxygen index value was 27.6% when the loading amount of MAHP was 21 wt%. However, there is no rating in vertical burning tests for PA6/AHP composite with the same amount of AHP, which indicated the surface modification of AHP enhanced the flame retardancy efficiency for PA6 composites. The morphological structures and analysis of X‐ray photoelectron spectroscopy of char residues revealed that the surface modification of AHP benefited to the formation of a sufficient, flame retardant elements rich, more compact and homogeneous char layer on the materials surface during combustion, which prevented the heat transmission and diffusion, limit the production of combustible gases, inhibit the emission of smoke and then led to the reduction of the heat release rate and smoke produce rate. The mechanical properties results revealed that the surface modification of AHP enhanced the mechanical properties, especially the Izod impact strength comparing with that of PA6/AHP composites with the same amount of flame retardant. After water resistance tests, the PA6/MAHP composites remained superior flame retardancy and presented continuous and compact char layer after cone calorimeter tests; however, the fire retardancy for PA6/AHP composite obviously decreased, and the char layer was discontinuous with big hole caused by the extraction of AHP by water during water resistance tests. Copyright © 2017 John Wiley & Sons, Ltd.     

A dual chemosensor for Cu2+ and Fe3+ based on π-extend tetrathiafulvalene derivative

A new dual chemosensor (TTF-PBA) for Fe³⁺ and Cu²⁺ in different signal pathways was designed and synthesized. The absorption spectrum, fluorescence spectrum and cyclic voltammograms changed in the presence of Cu²⁺ and Fe³⁺. The optical color changed within 5 s from yellow to orange upon the addition of Cu²⁺, and it changed to dark yellow when Fe³⁺ existed. The cyclic voltammogram of Cu²⁺/TTF-PBA changed from E_ox = 0.50 V, E_red = 0.32 V to E_ox = 0.64 V, E_red = 0.80 V (vs Ag/AgCl) upon the addition of 2.0 equiv. Cu²⁺. As for Fe³⁺/TTF-PBA, its oxidation wave disappeared, and its reduction wave appeared at E_red = ?0.59 V (vs Ag/AgCl) upon the addition of 4.0 equv. Fe³⁺. The sensor displayed high selectivity for Cu²⁺ and Fe³⁺ over other ions including Pb²⁺, Zn²⁺, Ni²⁺, Ag⁺, Cr³⁺, Mn²⁺, Al³⁺, Co²⁺, Pd²⁺, Hg²⁺, Fe^2+, Cd²⁺, Ce³⁺, Bi³⁺ and Au³⁺, the detection limits for Cu²⁺ and Fe³⁺ ion reached as low as 5.33 × 10^?7 mol/L and 5.34 × 10^?7 mol/L, respectively. Furthermore, when Fe³⁺ existed, Cu²⁺ can be detected sequentially by the sensor through the absorption spectrum and the color change observed by naked-eyes.