Rainbow refractrometry on particles with radial refractive index gradients

The rainbow refractrometry, under its different configurations (classical and global), is an attractive technique to extract information from droplets in evaporation such as diameter and temperature. Recently a new processing strategy has been developed which increases dramatically the size and refractive index measurements accuracy for homogeneous droplets. Nevertheless, for mono component as well as for multicomponent droplets, the presence of temperature and/or of concentration gradients induce the presence of a gradient of refractive index which affects the interpretation of the recorded signals. In this publication, the effect of radial gradient on rainbow measurements with a high accuracy never reached previously is quantified.     

Porous characteristics of carbon-coated silica gel beads prepared by liquid phase deposition of organic colloidal nanoparticles

Carbon-coated silica gel beads could be prepared by immersing porous silica gel beads in a resorcinol–formaldehyde (RF) aqueous solution and then following by drying and pyrolysis in nitrogen atmosphere. With the proposed method, deposition of colloidal nanoparticles formed during the sol–gel polycondensation of the RF solution was successfully prepared on the mesopores of the silica gel beads. Both size and concentration of the colloidal particles could be controlled by the gelation time and the mixing ratio (V_EtOH/V_RF) of the RF solution to ethanol. The porous characteristics of the prepared carbon-coated silica gel beads and the amounts of deposited carbon could be controlled by changing V_EtOH/V_RF. Without any significant decrease in mesoporosity, the maximal carbon contents of carbon-coated silica gel beads could be increased up to 18 wt% in the inner part and 53 wt% on the outer surface, respectively.     

Mechanical degradation of filter polymer materials: Polyphenylene sulfide

Polyphenylene sulfide (PPS) is known as a material resistant to high temperature and chemicals; however, there are arguments on the durability of PPS non-woven fabrics to chemicals, such as nitric acid (HNO₃), sulfuric acid (H₂SO₄), and hydrochloric acid (HCl). Therefore, this work aims at investigating the degradation of PPS non-woven fabrics in HNO₃, H₂SO₄ and HCl, and at confirming acid durability of PPS non-woven fabrics. In addition, this paper also studies the interaction among these three acids by measuring the retention of strength in binary or tertiary mixtures of these three acids. A discussion has been made on the acceleration/retardation of PPS degradation by the interactive effects, and also on the chemistry related to the degradation by these acids. Furthermore, there is a linear relationship between the nitric acid concentration and the proportion of carbon in the remaining PPS structures after 100 h of acid exposure. Also, this proportion of carbon is a good indicator of the retained strength in PPS fabrics.     

Characteristics of carbon nanoparticles synthesized by a submerged arc in alcohols, alkanes, and aromatics

Fullerene-related carbon nanostructures can be synthesized by an arc-in-liquid system as a cost-effective technique. In this work, we investigated the effects of additional carbon sources from liquid media that were alcohols (C(m)H(2m+1)OH, m = 1-8), alkanes (C(m)H(2m+2), m = 6-7), and aromatic compounds (C6H6-C(n)H(2n), n = 1-2) on the product structures and the yield of nanocarbon-rich deposits. It was found that carbon nanoparticles (CNPs) that included multi-walled carbon nanotubes (MW-CNTs) and multi-shelled carbon nanoparticles were produced at high concentrations in the hard deposit at the cathode tip formed by the arc in the alcohols and alkanes, similar to that in a water environment. Importantly, not only graphite electrodes but also these organic compounds played a role of a carbon source to produce CNPs that led to an approximately 8-100 times higher yield than the arc-in-water system. There was a tendency that the increase in alcohol concentration and carbon content in the organic molecules positively affected the yield and production rate of the CNPs. However, the selectivity of MW-CNTs was significantly reduced when aromatic compounds were used. Structural analyses by dynamic light scattering and Raman spectroscopy revealed the dependency of the hydrodynamic particle sizes of CNPs and their crystallinity on the liquid components. For a discussion on the reaction mechanism, optical emission spectra of the arc plasma were analyzed to estimate the arc temperature. In addition, liquid byproducts were analyzed by a UV-vis absorbance spectrometer.     

Degradation of semi-crystalline PPS bag-filter materials by NO and O2 at high temperature

In incineration plants, nitric oxide (NO) and oxygen (O₂) are the two major gaseous components, which degrade the mechanical properties of bag-filter media. Based on the experimental results of mass, dimension, morphology, crystallinity, fiber diameter, fiber orientation and fabric strength, changes in mechanical properties of polyphenylene sulfide (PPS) needled fabrics are related to two phenomena, i.e. the crystallization and the degradation of amorphous regions and some parts of crystalline regions. Both processes affect the fabric strength, competing with each other. The relation between strength and crystallinity is divided into two phases: (1) strength is dominated by crystallinity, and (2) strength is dependent on the defects in amorphous regions and some parts of crystalline regions. An increase in NO concentration has a potential to increase the deterioration rates of amorphous and crystalline phases but the crystallization process is unaffected. An increase in O₂ concentration leads to enhancement of both crystallization and deterioration.