Photosensitization of nanocrystalline TiO2 by self-assembled layers of CdS quantum dots

CdS quantum dots can be self-assembled on high surface area nanocrystalline TiO2 electrodes; spectroscopic and photoelectrochemical studies indicate that the size, and hence the absorption edge, of the CdS particles can be controlled; efficient photosensitization of the TiO2 electrode by the Q-particles has been achieved.     

Cobalt titanate–cobalt oxide composite thin films deposited from heterobimetallic precursor

A single molecular heterobimetallic complex, [Co₂Ti(μ₃‐O)(TFA)₆(THF)₃] (1) [TFA = trifluoroacetate, THF = tetrahydrofuran], was synthesized, structurally and spectroscopically characterized and implemented as a single‐source precursor for the preparation of CoTiO₃–CoO composite thin films by aerosol‐assisted chemical vapour deposition (AACVD). The precursor complex was prepared by interaction of Co(OAc)₂.4H₂O [OAc = (CH₃COO^?)] with Ti(iso‐propoxide)₄ in the presence of trifluoroacetic acid in THF, and was analysed by melting point, CHN, FT‐IR, single‐crystal X‐ray diffraction and thermogravimetric analysis. The precursor complex thermally decomposed at 480 °C to give a residual mass corresponding to a CoTiO₃–CoO composite material. Good‐quality crystalline CoTiO₃–CoO composite thin films deposited at 500 °C by AACVD and characterized through powder X‐ray diffraction and scanning electron microscopy/energy‐dispersive X‐ray spectroscopy show that the crystallites have a rose‐flower‐like morphology with an average petal size in the range of 2–6 µm. Copyright © 2012 John Wiley & Sons, Ltd.     

X-ray determination of the mean amplitudes of vibration and debye temperatures of some rare earth monochalcogenides

The x-ray diffraction intensities of Bragg reflections have been measured at room temperature for thulium selenide, samarium sulphide, samarium selenide and samarium telluride. On the basis of a common amplitude approximation, the Debye-Waller factor, the mean amplitude of vibration and the Debye temperature have been evaluated. The values of the Debye temperatures and mean amplitudes of vibration are 176±16°K, 0·185 ± 0·017 Å (TmSe), 155 ± 7°K, 0·244 ± 0·012 Å (SmS), 153 ± 14°K, 0·221 ± 0·020 Å (SmSe) and 151 ± 20°K, 0·204 ± 0·027 Å (SmTe).     

Growth of carbon nanotubes from waste blast furnace gases at atmospheric pressure

Carbon emissions from industrial sources are of major global concern, especially contributions from the steel manufacturing process which accounts for the majority of emissions. Typical blast furnace gases consist of CO₂ (20‐25%), CO (20‐25%), H₂ (3‐5%) and N₂ (40‐50%) and trace amounts of other gases. It is demonstrated that gas mixtures with these compositions can be used at atmospheric pressure to grow carbon nanotubes (CNTs) by chemical vapor deposition (CVD) on to steel substrates, which act as catalysts for CNT growth. Computational modelling was used to investigate the CNT growth conditions inside the CVD chamber. The results show that industrial waste pollutant gases can be used to manufacture materials with significant commercial value, in this case CNTs.     

Electrosynthesis of cyclic carbonates from epoxides and atmospheric pressure carbon dioxide

The use of CO(2) for the preparation of value-added compounds has dramatically increased due to increased global warming concerns. We herein report an electrochemical cell containing a copper cathode and a magnesium anode that effectively converts epoxides and carbon dioxide to cyclic carbonates under mild electrochemical conditions at atmospheric pressure.     

New insights into water splitting at mesoporous α-Fe2O3 films: a study by modulated transmittance and impedance spectroscopies

Thin mesoporous films of α-Fe(2)O(3) have been prepared on conducting glass substrates using layer-by-layer self-assembly of ca. 4 nm hydrous oxide nanoparticles followed by calcining. The electrodes were used to study the oxygen evolution reaction (OER) in the dark and under illumination using in situ potential-modulated absorption spectroscopy (PMAS) and light-modulated absorption spectroscopy (LMAS) combined with impedance spectroscopy. Formation of surface-bound higher-valent iron species (or "surface trapped holes") was deduced from the PMAS spectra measured in the OER onset region. Similar LMAS spectra were obtained at more negative potentials in the onset region of photoelectrochemical OER, indicating involvement of the same intermediates. The impedance response of the mesoporous α-Fe(2)O(3) electrodes exhibits characteristic transmission line behavior that is attributed to slow hopping of holes, probably between surface iron species. Frequency-resolved PMAS and LMAS measurements revealed slow relaxation behavior that can be related to the impedance response and that indicates that the lifetime of the intermediates (or trapped holes) involved in the OER is remarkably long.     

帕隆藏布流域堆积体边坡的工程地质特征及稳定性评价

位于藏东南的帕隆藏布流域,处在东喜马拉雅构造结的北缘,是新构造强烈隆升区,断层、褶皱等地质构造发育。在青藏高原隆升及气候变化等内外动力作用下,研究区内堆积体分布广泛,具有独特的工程地质特征并成为该区内地质灾害的主要物源。由于河流的下切及川藏公路的修建,形成了许多高陡的堆积体边坡,以冰碛边坡最为典型。由于其特殊的物源特征及形成过程,冰碛物具有粒度分布范围广、粗粒含量多等与其他沉积物不同的粒度特征。冰碛物粒度分布范围广的特征,导致随着研究尺度的不同,其结构特征也不相同,具有明显的尺度效应。冰碛土的力学强度一般强于其他堆积体,但受不同粒径颗粒的含量及分布、形成时代的影响,其力学特征也有所差异。作者对川藏公路沿线部分典型的剖面进行了量测,所量测的剖面虽然只是整个斜坡的一部分,与经验数据相比,仍表现出高陡的特征,而且很多边坡在既高且陡的形态下仍能保持稳定。本文以极限平衡理论为基础,采用多种方法对这类边坡的稳定性进行计算分析,求出边坡的安全系数。考虑各种地震烈度下边坡的稳定性,得出这些边坡的安全系数与地震加速度具有严格的指数相关关系。     

Dose–Response Relationship of Photobiomodulation Therapy on Matrix Metalloproteinase in Healing Dynamics of Diabetic Neuropathic Ulcers—An in vivo Study

Individuals with diabetic foot ulcers have overlapped the inflammatory, proliferative and remodeling phase, making the tissue vulnerable to delayed healing responses. We aimed to establish the dose–response relationship of photobiomodulation therapy of different doses and matrix metalloproteinases in the healing dynamics of diabetic neuropathic ulcers. Diabetes was induced in 126 Albino Wistar rats, and neuropathy was induced to the hind paw by a sciatic nerve injury method. An excisional wound was created on the neuropathy-induced leg. Photobiomodulation therapy of dosages 4, 6, 8, 10, 12 and 15 J cm⁻² and wavelength 655 nm and 808 nm was irradiated. Photobiomodulation therapy of dosages 4, 6 and 8 J cm⁻² showed better wound healing properties with optimized levels of matrix metalloproteinases-1 and 8. We observed a strong dose response in the experimental group treated with 6 and 8 J cm⁻². The findings from the present study conclude that photobiomodulation therapy of dosages 4, 6 and 8 J cm⁻² is suggestive of usefulness in diabetic neuropathic ulcer healing. Markers like matrix metalloproteinases may give a clear direction on response to the therapy. Based on the findings from the present study, we recommend to validate the findings for safety and efficacy in future through human prospective randomized controlled clinical trials.     

Fabrication of NiO photoelectrodes by aerosol‐assisted chemical vapour deposition (AACVD)

Nanostructured nickel oxide (NiO) photoelectrodes were fabricated with controlled morphology and texture using single‐step aerosol‐assisted chemical vapour deposition (AACVD). The durable one‐step film fabrication process resulted in highly crystalline columnar structure. Texture controlled films were also fabricated from granular to crystalline columnar morphology by controlling the deposition temperature. The thin film electrodes are highly reproducible and possess an optical bandgap of ～3.7 eV and exhibit cathodic photocurrent. (© 2014 WILEY‐VCH Verlag GmbH &Co. KGaA, Weinheim)     

Synthesis of high purity calcium carbonate micro‐ and nano‐structures on polyethylene glycol templates using dolomite

This research paper describes the synthesis of nano‐ and micro‐structures of high purity precipitated calcium carbonate (PCC) on poly(ethylene glycol)(PEG) templates for broad‐range industrial applications, using readily available and cheap impure dolomitic marbles. In the method, calcium components of impure dolomitic marbles are extracted as calcium sucrate which is then bubbled with carbon dioxide gas using a carbonation column in the presence of PEG. The effects of concentration of PEG, pH of calcium sucrate solution and temperature on the final yield, morphology and polymorphism of PCC have been studied. Vaterite and calcite are the crystalline forms of calcium carbonate found in final PCC products. The vaterite is observed as hollow spheres with particle diameter of 1.5‐2 μm which is formed by aggregation of vaterite nanoparticles with particle size of 20 nm on PEG templates. Optimum conditions for the highest PCC yield of 79.94% are 0.4 mol dm⁻³ of PEG, pH of 6.5 and temperature of 80 °C. The purity of PCC products is about 99%. Therefore, the synthesized PCC products are of required purity and quality for industrial applications.