Metal-Mediated Directional Capping of Rod-Packing Metal–Organic Frameworks

Two new rod-packing metal–organic frameworks (RPMOF) are constructed by regulating the in situ formation of the capping agent. In CPM-s7, carboxylate linkers extend 1D manganese-oxide chains in four additional directions, forming 3D RPMOF. The substitution of Mn²⁺ with a stronger Lewis acidic Co²⁺, leads to an acceleration of the hydrolysis-prone sulfonate linker, resulting in presence of sulfate ions to reduce two out of the four carboxylate-extending directions, and thus forming a new 2D rod-packing CPM-s8. Density functional theory calculations and magnetization measurements reveal ferrimagnetic ordering of CPM-s8, signifying the potential of exploring 2D RPMOF for effective low-dimensional magnetic materials.     

Low-frequency dilatational wave propagation through unsaturated porous media containing two immiscible fluids

An analytical theory is presented for the low-frequency behavior of dilatational waves propagating through a homogeneous elastic porous medium containing two immiscible fluids. The theory is based on the Berryman–Thigpen–Chin (BTC) model, in which capillary pressure effects are neglected. We show that the BTC model equations in the frequency domain can be transformed, at sufficiently low frequencies, into a dissipative wave equation (telegraph equation) and a propagating wave equation in the time domain. These partial differential equations describe two independent modes of dilatational wave motion that are analogous to the Biot fast and slow compressional waves in a single-fluid system. The equations can be solved analytically under a variety of initial and boundary conditions. The stipulation of “low frequency” underlying the derivation of our equations in the time domain is shown to require that the excitation frequency of wave motions be much smaller than a critical frequency. This frequency is shown to be the inverse of an intrinsic time scale that depends on an effective kinematic shear viscosity of the interstitial fluids and the intrinsic permeability of the porous medium. Numerical calculations indicate that the critical frequency in both unconsolidated and consolidated materials containing water and a nonaqueous phase liquid ranges typically from kHz to MHz. Thus engineering problems involving the dynamic response of an unsaturated porous medium to low excitation frequencies (e.g., seismic wave stimulation) should be accurately modeled by our equations after suitable initial and boundary conditions are imposed.     

Facile Generation of Thermally Activated Delayed Fluorescence and Fabrication of Highly Efficient Non-Doped OLEDs Based on Triazine Derivatives

A series of donor–acceptor–donor triazine-based molecules with thermally activated delayed fluorescence (TADF) properties were synthesized to obtain highly efficient blue-emitting OLEDs with non-doped emitting layers (EMLs). The targeted molecules use a triazine core as the electron acceptor, and a benzene ring as the conjugated linker with different electron donors to alternate the energy level of the HOMO to further tune the emission color. The introduction of long alkyl chains on the triazine core inhibits the unwanted intermolecular D –D/A–A-type π–π interactions, resulting in the intermolecular D–A charge transfer. The weak aggregation-caused quenching (ACQ) effect caused by the suppressed intermolecular D –D/A–A-type π–π interaction further enhances the emission. The crowded molecular structure allows the electron donor and acceptor to be nearly orthogonal, thereby reducing the energy gap between triplet and singlet excited states (ΔE_ST). As a result, blue-emitting devices with TH-2DMAC and TH-2DPAC non-doped EMLs showed satisfactory efficiencies of 12.8 % and 15.8 %, respectively, which is one of the highest external quantum efficiency (EQEs) reported for blue TADF emitters (λ_peak<475 nm), demonstrating that our tailored molecular designs are promising strategies to endow OLEDs with excellent electroluminescent performances.     

Study on alpha cup technique for monitoring of soil radon levels

Determination of radon concentrations in soil usually requires the accumulation of many measurements over a large area. In this study, an alpha cup technique that provides a cumulative result for adsorption of radon progeny over time was investigated. In addition, the performance of measurements were evaluated. To avoid the impacts of temperature and humidity, a new arithmetic correction was explored. Finally, we also investigated the effect of burial time of the alpha cup on soil radon measurements. Experiments showed that the alpha cup technique can satisfy the demands of soil radon measurements in efficiency, accuracy, reliability, and stability.     

Unexpectedly ligand-free copper-catalyzed C–S cross-coupling of benzothiazole with aryl iodides in aqueous solution

A novel synthetic protocol for 2-aminophenyl sulfide derivatives via the reactions of benzothiazole with aryl iodides was reported for the first time. The reactions were catalyzed by CuCl with tetrabutylammonium hydroxide as the base and water as the solvent without ligand at 50 °C or room temperature. A variety of aryl iodides underwent the C–S cross-coupling reaction with benzothiazole to afford smoothly the corresponding products in excellent yield.     

The highly chemoselective transfer hydrogenation of the carbon–carbon double bond of conjugated nitroalkenes by a rhodium complex

Chemoselective transfer hydrogenation of conjugated nitroalkenes catalyzed by [RhCl₂Cp¹]₂–diamine complex (Cp¹=η⁵-C₅Me₅) using HCOOH/Et₃N (5:2) (TEAF) as a hydrogen source was realized. A variety of nitrostyrenes, β-methyl nitrostyrenes, and 3-methyl-4-nitro-5-alkenyl-isoxazoles were reduced smoothly in good to excellent yields in short reaction time. Other functional groups are inert under the reaction conditions.     

Mo_2C/γ-Al_2O_3催化剂上苯加氢反应的原位红外光谱研究

采用程序升温反应法制备了钝化态、还原钝化态和新鲜态Mo2C/γ-Al2O3催化剂,结合原位红外光谱表征技术和反应性能评价,考察、比较了三种催化剂苯加氢反应活性.原位红外光谱结果表明,新鲜态Mo2C/γ-Al2O3催化剂在室温就显示了较好的苯加氢反应活性,表现了类贵金属的催化活性.CO吸附在反应前后新鲜态Mo2C/γ-Al2O3催化剂上的对比结果表明,低价态的Mo位(Moδ+(0δ2))是苯加氢反应活性中心.三种催化剂的反应活性结果表明,新鲜态Mo2C/γ-Al2O3催化剂反应活性最好,催化剂寿命最长,失活之后在500°C下H2处理即可恢复原有活性.     

Functional Microgels Assisted Tryptic Digestion and Quantification of Cytochrome c Through Internal Standard Mass Spectrometry

Quantitation of cytochrome c (Cyt c) in cell lysates through surface-assisted laser desorption/ionization mass spectrometry (SALDI-MS) using gold nanoparticles (Au NPs) as the matrix and GR-10 peptide as an internal standard has been demonstrated. To shorten digestion time, temperature sensitive microgels containing trypsin (TR) and Au NPs have been employed. As-prepared functional microgels (TR/Au NPs/MGs) allow digestion of Cyt c within 15 s under microwave irradiation. The internal standard SALDI-MS approach provides linearity (R² = 0.98) of MS signal ratio (I _1168.6/I _1067.6) of the tryptic digested peptide (m/z 1168.6) to GR-10 peptide (m/z 1067.6) against the concentration of Cyt c ranging from 25 to 200 nM, with a limit of detection (at a signal-to-noise ratio of 3) of 10 nM. This approach has been validated by the analysis of the lysates of HeLa cells, with an average concentration of 13.7?±?3.5 μM for cytoplasmic Cyt c. Increased concentrations of Cyt c in the HeLa cells treated with etoposide (a commercial drug) or carbon dots (potential drug) have been revealed through this simple, sensitive, and rapid SALDI-MS approach, supporting the drugs induced Cyt c-mediated apoptosis of the cells. This study has shown that this internal standard SALDI-MS approach holds great potential for cell study. Graphical Abstract

?     

基于1085 km实地光纤链路的双波长光纤时间同步研究

在长距离高精度光纤时间同步系统中,为了减少后向反射光与光纤色散对传输精度的影响,本文在双波长光纤时间同步传输方法之上,提出了一种具有色散误差修正功能的双波长光纤时间同步传输方法.以自行研制的工程样机在长度约为800 km的实验室光纤链路上和1085 km的实地光纤链路上进行了实验测试,也是国内首次实现千公里级实地光纤时间同步传输.在实验室光纤链路上,测得传输链路色散补偿后的色散时延误差为10 ps,时间同步标准差为5.7 ps,稳定度为1.12 ps@105 s,不确定度为18.4 ps.在实地光纤链路上,测得传输链路色散补偿后的色散时延误差为60 ps,时间同步标准差为18 ps,稳定度为5.4 ps@4×10⁴ s,不确定度为63.5 ps.