Assessment of Noise Exposure of Sawmill Workers in Southwest,Nigeria

Economic wood processing employs the use of industrial machines for cutting, shaping, milling, and sawing timber, thereby leading to the generation of high levels of noise. Published data from empirical studies have categorized noise as an environmental hazard of global significance. Furthermore, noise exposure limits for different industries and all the industrial machines available has not been formally established as it presently exists in developed nations around the world. Therefore, this study assessed the daily exposure of sawmills workers to noise in Southwestern Nigeria. Reconnaissance surveys were first carried out in Osun, Oyo, Ondo, Ekiti, Lagos, and Ogun States to select sawmills that were fully operational and fit for the study. Two fully functional sawmills in two cities of each State were eventually selected for data collection, making a total of 24 sawmills, while the Circular Machines (CM), Planer Machines (PM), and Band-saw Machines (BM) were the machines in each sawmill considered. Two machines each of CM, PM, and BM were considered in each sawmill, making a total of forty-eight (48) machines each of CM, PM, and BM. Sound data were collected between 7 am and 7 pm each day for six days (between Monday and Saturday) using Extech 407732 sound level meter and all stabilized measurements were taken three times at different intervals. The data collected were in three different periods: Machine No-work Period (NP_m), Machine Idle Period (IP_m), and Machine Working Period (WP_m). A two–way Analysis of Variance (ANOVA) was carried out at P < 0.05 to determine whether there is a significant difference in the sound level average before and after the break, for both the idle and working periods of the three machines considered. This was also done to determine whether there is a significant difference between the sound level average of the results collected during idle and working periods of the three machines. Noise Pollution Levels (L_np) ranged from 83.20 dB (PM) to 107.65 (BM) and 93.42 (CM and PM) – 116.00 (BM) respectively, while IP_m also gave the least noise pollution level of 95.79 dB and WP_m gave the highest level of 102.88 dB. The results revealed that all the machines’ L_np values in the working period are more than the 90 dB acceptable limit the recommendation value of 90 dB while 89.6% of CMs, 75% of PMs, and 89.6% of BM had their L_np above 90 dB in the idle period respectively. The minimum and the maximum noise dose levels for IP_m, WP_m and overall are 0.09 (BM) and 2.37 (CM), 0.50 (CM), and 4.77 (PM) and 0.69 (BM) and 6.64 (PM) respectively. The study found out that the fundamental contributing factors to the high noise levels in sawmills are poor machine maintenance, use of old and obsolete machines, poor housekeeping strategy, limited space, workers’ negligence, lack of PPE, and lack of occupational safety training. The study recommends that proper workplace practices such as use of personal protective equipment, new and modern machines, training, and occupational safety programmes be implemented in the considered sawmills.     

Leptospermum petersonii as a Potential Natural Food Preservative

Leptospermum petersonii (family Myrtaceae) is often cultivated for ornamental purposes but also serves as a rich source of bioactive essential oils. While several studies focused on the activities of the essential oils, this study analysed the potential of spent L. petersonii leaves as a natural food preservative. Method: We investigated the in vitro antioxidant and antimicrobial activities of crude L. petersonii extracts against activities of the purified isolated flavonoid, 6-methyltectochrysin, which was characterized using spectroscopic methods. The antioxidant assays followed ORAC, FRAP and TEAC tests. The antimicrobial activities of the extract and purified flavonoid were analysed against six multi-drug resistant microbial strains in broth dilution assays. Result: The results revealed that both the crude extracts and isolated 6-methyltectochrysin exhibited positive radical ion scavenging antioxidant potential, however the crude extract was about 6-fold more potent antioxidant than the purified 6-methyltectochrysin. The crude extract also showed strong antimicrobial activities against Bacillus cereus, and even more potent antimicrobial agent than the reference ampicillin antibiotic against Klebsiella pneumoniae subsp. pneumoniae. A higher resistance was observed for the tested Gram-negative strains than for the Gram-positive ones. 6-methyltectochrysin was generally inactive in the antimicrobial assays. Conclusion: The crude methanolic extract showed significant bioactivity which validates the medicinal relevance of the plant. The observed biological activities, especially against a notorious strain of B. cereus, suggest that L. petersonii could be a promising natural source of food preservatives.     

Experimental and theoretical investigations of adsorption characteristics of itraconazole as green corrosion inhibitor at a mild steel/hydrochloric acid interface

The adsorption and inhibition effect of itraconazole (ICZ) on mild steel in 0.5?M HCl at 303?C333?K was studied using gravimetric and quantum chemical methods. The adsorption of ICZ has been tested thermodynamically and was found to be mainly a physical adsorption mechanism and weak chemisorption. The activation and thermodynamic functions (such as E _a, $ \Updelta H^{*} ,\,\Updelta G_{\text{ads}}^{\text{o}} $ ) of dissolution and adsorption processes have been evaluated and discussed. The analyses of the results obtained showed that ICZ inhibits the corrosion of mild steel effectively at moderate temperatures and adsorbs according to the Temkin adsorption isotherm. An attempt to correlate the molecular structure to quantum chemical indices was made using a semi-empirical (PM3) method. Results of the theoretical study indicate that nitrogen and oxygen atoms (O10, O13, N17, N19, O21, N28, N42, N43, and O45) were the reactive sites.     

A comparison of the reproducibility of the parameters of the ¹³C-aminopyrine breath test for the assessment of hepatic function

This study determined the within-subject and between-subject variability of different ways of expressing the results of the (13)C-aminopyrine breath test ((13)C-ABT) and the effect of shortening the test duration. The (13)C-ABT was conducted on three separate occasions in 10 healthy volunteers and on a single occasion in 22 patients with established liver cirrhosis. The within-subject variability of cumulative percentage dose recovered (cPDR), using measured CO(2) production rate (VCO(2)), in the reference group over three trials was 15% over 120 min. Higher within-subject variability in cPDR would have been evident if the test was terminated at either 30 or 60 min. Substitution of predicted VCO(2) to calculate cPDR yielded comparable values at all time points. Significant differences between cirrhotics and reference group were evident after just 10 min using PDR/h, cPDR or enrichment (all P<0.05). The ABT demonstrates clinically acceptable reproducibility. Shortening of the duration may make the test more acceptable clinically, but it is associated with increasing imprecision.     

Preparation of stable colloidal suspensions of superdisintegrants via wet stirred media milling

Superdisintegrants are cross-linked polymers that can be used as dispersants for fast release of drug nanoparticles from nanocomposite microparticles during in vitro and in vivo dissolution.Currently available superdisintegrant particles have average sizes of approximately 5-130 μm,which are too big for drug nanocomposite applications.Hence,production of stable superdisintegrant suspensions with less than5 μm particles is desirable.Here,we explore the preparation of colloidal suspensions of anionic and nonionic superdisintegrants using a wet stirred media mill and assess their physical stability.Sodium starch glycolate(SSG) and crospovidone(CP) were selected as representative anionic and nonionic superdisintegrants,and hydroxy propyl cellulose(HPC) and sodium dodecyl sulfate(SDS) were used as a steric stabilizer and a wetting agent/stabilizer,respectively.Particle sizing,scanning electron microscopy,and zeta potential measurements were used to characterize the suspensions.Colloidal superdisintegrant suspensions were prepared reproducibly.The extensive particle breakage was attributed to the swelling-induced softening in water.SSG suspensions were stable even in the absence of stabilizers,whereas CP suspensions required HPC-SDS for minimizing particle aggregation.These findings were explained by the higher absolute(negative) zeta potential of the suspensions of the anionic superdisintegrant(SSG) as compared with those of the nonionic superdisintegrant(CP).     

Preparation and Characterization of Activated Carbon – nFe3O4, Activated Carbon – nSiO2 and Activated Carbon – nZnO Hybrid Materials

The preparation and physicochemical characterization of activated carbon, nano metal oxides, and activated carbon – nFe₃O₄, activated carbon – nSiO₂ and activated carbon – nZnO hybrid materials has been undertaken. The materials have been characterized by scanning and transmission electron microscopy, x‐ray diffraction, CNH analysis and Fourier transform infrared spectroscopy. Surface area and porosity, ash content, pH, and point of zero charge were also measured. The results showed that the surfaces of activated carbon, nSiO₂, activated carbon – nFe₃O₄, activated carbon – nSiO₂ and activated carbon – nZnO are suitable for the sorption of cationic complexes while the surfaces of nFe₃O₄ and nZnO are favourable to the sorption of anionic complexes of heavy metals. Results also showed that the composition of the activated carbon and nano metal oxides increased the surface and micropore areas of nano metal oxides due to the large number of micropores and crevices on the surface of the hybrid materials.     

Reduction of Breakdown Pressure by Filter Cake Removal Using Thermochemical Fluids and Solvents: Experimental and Numerical Studies

The process of well cleanup involves the removal of an impermeable layer of filter cake from the face of the formation. The inefficient removal of the filter cake imposes difficulty on fracturing operations. Filter cake’s impermeable features increase the required pressure to fracture the formation. In this study, a novel method is introduced to reduce the required breakdown pressure to fracture the formation containing the water-based drilling fluid filter cake. The breakdown pressure was tested for five samples of similar properties using different solutions. A simulated borehole was drilled in the core samples. An impermeable filter cake using barite-weighted drilling fluid was built on the face of the drilled hole of each sample. The breakdown pressure for the virgin sample without damage (filter cake) was 6.9 MPa. The breakdown pressure increased to 26.7 MPa after the formation of an impermeable filter cake. Partial removal of filter cake by chelating agent reduced the breakdown pressure to 17.9 MPa. Complete dissolution of the filter cake with chelating agents resulted in the breakdown pressure approximately equivalent to the virgin rock breakdown pressure, i.e., 6.8 MPa. The combined thermochemical and chelating agent solution removed the filter cake and reduced the breakdown pressure to 3.8 MPa. Post-treatment analysis was carried out using nuclear magnetic resonance (NMR) and scratch test. NMR showed the pore size redistributions with good communication between different pores after the thermochemical removal of filter cake. At the same time, there was no communication between the different pores due to permeability impairment after filter cake formation. The diffusion coupling through NMR scans confirmed the higher interconnectivity between different pores systems after the combined thermochemical and chelating agent treatment. Compressive strength was measured from the scratch test, confirming that filter cake formation caused added strength to the rock that impacts the rock breakdown pressure. The average compressive strength of the original specimen was 44.5 MPa that increased to 73.5 MPa after the formation of filter cake. When the filter cake was partially removed, the strength was reduced to 61.7 MPa. Complete removal with chelating agents removed the extra strength that was added due to the filter cake presence. Thermochemical and chelating agents resulted in a significantly lower compressive strength of 25.3 MPa. A numerical model was created to observe the reduction in breakdown pressure due to the thermochemical treatment of the filter cake. The result presented in this study showed the engineering applications of thermochemical treatment for filter cake removal.     

A comparison of the reproducibility of the parameters of the 13C-aminopyrine breath test for the assessment of hepatic function

This study determined the within-subject and between-subject variability of different ways of expressing the results of the ¹³C-aminopyrine breath test (¹³C-ABT) and the effect of shortening the test duration. The ¹³C-ABT was conducted on three separate occasions in 10 healthy volunteers and on a single occasion in 22 patients with established liver cirrhosis. The within-subject variability of cumulative percentage dose recovered (cPDR), using measured CO₂ production rate (VCO₂), in the reference group over three trials was 15% over 120 min. Higher within-subject variability in cPDR would have been evident if the test was terminated at either 30 or 60 min. Substitution of predicted VCO₂ to calculate cPDR yielded comparable values at all time points. Significant differences between cirrhotics and reference group were evident after just 10 min using PDR/h, cPDR or enrichment (all P<0.05). The ABT demonstrates clinically acceptable reproducibility. Shortening of the duration may make the test more acceptable clinically, but it is associated with increasing imprecision.     

Structural Transformation and Creativity Induced by Biological Agents during Fermentation of Edible Nuts from Terminalia catappa

Terminalia catappa L. (tropical almond) is a nutritious fruit found mainly in the tropics. This study is aimed to establish the naturally biotransformed molecules and identify the probiotic agents facilitating the fermentation. The aqueous extracts from both the unfermented and fermented T. catappa nuts were subjected to gas chromatography/mass spectrometry (GC/MS) analysis. Syringol (6.03%), glutamine (1.71%), methyl laurate (1.79%), methyl palmitate (1.53%), palmitic acid (5.20%), palmitoleic acid (2.80%), and methyl oleate (2.97%) were detected in the unfermented nuts of the T. catappa. Additionally, two of these natural compounds (palmitic acid (4.19%) and palmitoleic acid (1.48%)) survived the fermentation process to emerge in the fermented seeds. The other natural compounds were biotransformed into 2,3-butanediol (1.81%), butyric acid (16.20%), propane-1,3-diol (19.66%), neoheptanol (2.89%), 2-piperidinone (6.63%), palmitoleic acid (1.18%), formamide, n-(p-hydroxyphenethyl)- (2.80%), and cis-vaccenic acid (1.69%) that newly emerged in the fermented seeds. The phytochemical compounds are likely carbon sources for the organisms facilitating the biotransformed molecules and product production. Four (4) potential probiotic bacteria strains, namely, Probt B1a, Probt B2a, Probt B4a, and Probt B4b, were isolated from the fermented nut. Enterococcus faecum, and Enterococcus faecalis were the organisms identified as driving the fermentation of the seeds. All strains were gram-positive, catalase-negative, and non-hemolytic, which suggests their harmless nature. N-(p-hydroxyphenethyl)-) was associated with fermentation for the first time, and neoheptanol was discovered as the main alcoholic molecule formed during the fermentation of the seeds. This fermentation is a handy tool for bio-transforming compounds in raw food sources into compounds with nutritious and therapeutic potentials.     

The evaluation of the repeatability of the 13C-ketoisocaproate breath test for assessing hepatic mitochondrial function

The ¹³C-ketoisocaproate (¹³C-KICA) breath test (BT) has been recently proposed as a non-invasive test for assessing hepatic mitochondrial function. Results of the ¹³C-KICA BT can be expressed as different parameters. However, the best parameter for expressing the ¹³C-KICA BT result is uncertain which hinders use of the BT in routine clinical practice. We have investigated the repeatability of different parameters of ¹³C-KICA BT. Thirteen healthy adult subjects (5 men and 8 women) underwent a ¹³C-KICA BT on two occasions separated by a gap of approximately 30 days. There were no significant differences between the repeated measurements for all the test parameters over 30 days. Furthermore, the Bland Altman statistics showed no fixed or proportional bias for any of the test parameters. The cumulative ¹³C-dose enrichment over 60 min had the lowest within-subject variability of 12% compared to all other test parameters. The cumulative ¹³C-dose enrichment over 60 min could be a very useful parameter for the ¹³C-KICA BT to detect impaired hepatic mitochondrial function in patients with chronic liver diseases.