Acidic and reductive dissolution of magnetite in aqueous sulfuric acid: Site-binding model and experimental results

The open circuit dissolution of ionic metal oxides in mineral acids is modelled assuming that the rate is controlled by the transfer of metal ions in hydrolytic equilibrium with bulk metal ions, from the metal oxide surface to the Stern plane. The site-binding model of the double layer metal oxide/electrolyte solution is used to obtain the pH dependence of surface and Stern potentials. The nature of the active sites is discussed and their surface concentration is assumed to be proportional to suface charge σ₀. Again, the site-binding model is used to detemine the pH dependence of σ₀. It is thus shown that the rate order in c_H⁺ is essentially defined by the potential dependence of the charge transfer process, for oxides with points of zero charge near neutrality that dissolve in mildly or strongly acidic solutions. The role of surface complexation is also discussed in terms of the site-binding model and the difficulties in interpreting dissolution experiments under constant external applied potential are discussed in terms of the complexity of the semiconductor oxide/electrolyte solution interfacial region in magnetite.An experimental study of the open circuit dissolution of magnetite in sulfuric acid is presented and interpreted according to the proposed model.The reductive dissolution of magnetite is modelled by extension of the Valverde-Wagner model of oxide dissolution. Experimental results are presented to demonstrate that the reductive dissolution rate of magnetite in ferrous containing solutions is controlled by the rate of electron transfer from adsorbed Fe(II) to Fe(III) surface states of magnetite.     

Structure-based identification and clustering of protein families and superfamilies

Summary We describe an approach to protein structure comparison designed to detect distantly related proteins of similar fold, where the procedure must be sufficiently flexible to take into account the elasticity of protein folds without losing specificity. Protein structures are represented as a series of secondary structure elements, where for each element a local environment describes its relations with the elements that surround it. Secondary structures are then aligned by comparing their features and local environments. The procedure is illustrated with searches of a database of 468 protein structures in order to identify proteins of similar topology to porcine pepsin, porphobilinogen deaminase and serum amyloid P-component. In all cases the searches correctly identify protein structures of similar fold as the search proteins. Multiple cross-comparisons of protein structures allow the clustering of proteins of similar fold. This is exemplified with a clustering of /- and -class protein structures. We discuss applications of the comparison and clustering of three-dimensional protein structures to comparative modelling and structure-based protein design.     

Comparative assessment of solid-phase extraction clean-up procedures, GC columns and perfluoroacylation reagents for determination of type B trichothecenes in wheat by GC-ECD

Various solid-phase extraction (SPE) procedures for clean-up, two perfluoroacylation reagents (pentafluoropropionic anhydride (PFPA) and heptafluorobutyric anhydride (HFBA)) and two chromatographic columns (HP-1701 and HP-5) have been assessed comparatively to achieve the determination of type B trichothecenes (deoxynivalenol (DON), nivalenol (NIV), 3- and 15-acetyldeoxynivalenol (3- and 15-ADON)) in wheat grain by gas chromatography (GC)-electron-capture detection (ECD). Spiked wheat samples were extracted with acetonitrile-water (84:16, v/v). Tested SPE procedures were MycoSep 225 column, Florisil and different cartridges prepared in the laboratory with mixtures of various sorbents like alumina, Celite 545, C18, silica and charcoal. We propose MycoSep 225 column, and cartridges made with alumina-charcoal-silica and alumina-charcoal-C18 silica mixtures as clean-up procedures on the basis of recovery values (89.6, 87.3 and 86.1% for deoxynivalenol, respectively, at 1.0 mg/kg spiking level). The two last procedures are less expensive. Pentafluoropropionic anhydride was more stable against moisture and less expensive, while recoveries were similar to those obtained with heptafluorobutyric anhydride. HP-1701 column can separate 3- and 15-acetyldeoxynivalenol derivatives while HP-5 cannot, although this last column provided lower bleed and better sensitivity.     

Replacing Synthetic with Microbial Surfactants as Collectors in the Treatment of Aqueous Effluent Produced by Acid Mine Drainage,Using the Dissolved Air Flotation Technique

Dissolved air flotation (DAF) is a well-established separation process employing micro bubbles as a carrier phase. The application of this technique in the treatment of acid mine drainage, using three yeast biosurfactants as alternative collectors, is hereby analyzed. Batch studies were carried out in a 50-cm high acrylic column with an external diameter of 2.5 cm. High percentages (above 94%) of heavy metals Fe(III) and Mn(II) were removed by the biosurfactants isolated from Candida lipolytica and Candida sphaerica and the values were found to be similar to those obtained with the use of the synthetic sodium oleate surfactant. The DAF operation with both surfactant and biosurfactants, achieved acceptable turbidity values, in accordance with Brazilian standard limits. The best ones were obtained by the biosurfactant from C. lipolytica, which reached 4.8 NTU. The results obtained with a laboratory synthetic effluent were also satisfactory. The biosurfactants removed almost the same percentages of iron, while the removal percentages of manganese were slightly higher compared with those obtained in the acid mine drainage effluent. They showed that the use of low-cost biosurfactants as collectors in the DAF process is a promising technology for the mining industries.     

Direct determination of nickel in gas oil by atomic absorption spectrometry with electrothermal atomization

A rapid graphite-furnace atomic absorption procedure with simple dilution of samples was tested for the direct determination of sub-ppm levels of nickel in gas oils. The selection of appropriate graphite-furnace parameters, the type of solvent and organometallic standard, the effect of gas oil concentration in diluted samples, precision, accuracy and detection limit were investigated. Sample dilution was necessary because of high viscosity. Results obtained by standard addition for heavy gas oils were confirmed by a wet-ashing flame atomic absorption procedure. The relative standard deviation (r.s.d.) for consecutive determinations of nickel in gas oil solution containing 19 μg Ni l^?1 was 3.1%, and day-to-day r.s.d. for a reference gas oil sample was 5.3%. Accuracy was determined with an NBS standard reference oil GM-5 (4.6 ± 4.7% relative error in four determinations). Recovery experiments gas 104 ± 12% of the added nickel.     

An alternative approach to the synthesis of the carbapenam ring system. Allenes as acceptor-donor reagents in 3 + 2 annelations

1,1-Dichloro-3-methylsulfonyl-3-methylthio-1,2-propadiene, generated in situ under basic conditions, reacted with a 4-iodomethylazetidinone to give a carbapenam. Subsequent efforts to convert this material to a Δ-2-carbapenem by rearrangement of an allylic sulfoxide led instead to the formation of a novel Δ-1-carbapenem.     

Analysis of the common characteristics of the Hartmann,Ronchi, and Shack–Hartmann tests

An overview of the settings of the planes for the filters and observed patterns in the Hartmann and Ronchi tests is presented. Also a new set of filters for both test were developed. In a similar way, it is easy to extend this analysis to the Shack–Hartmann test, and to propose a new Null Shack–Hartmann filter.