Electrochemical behavior of methylene blue at bare and DNA-modified silver solid amalgam electrodes

Journal of Solid State Electrochemistry - Cyclic voltammetry (CV) and differential pulse voltammetry (DPV) were used for a voltammetric study of methylene blue (MB) at a mercury meniscus-modified...     

Rapid Detection of AIB1 in Breast Cancer Cells Based on Aptamer-Functionalized Nanomotors

Herein, we report ultrasound-propelled graphene-oxide coated gold nanowire motors, functionalized with fluorescein-labeled DNA aptamers (FAM-AIB1-apt), for qualitative detection of overexpressed AIB1 oncoproteins in MCF-7 breast cancer cells. The movement of nanomotors under the ultrasound field facilitated intracellular uptake and resulted in a faster aptamer binding with the target protein and thus faster fluorescence recovery. The propulsion behavior of the aptamer functionalized nanomotors greatly enhanced the fluorescence intensity compared to static conditions. The new aptamer@nanomotor-based strategy offers considerable potential for further development of sensing methodologies towards diagnosis of breast cancer.     

Photoinitiated polymerization of methacrylates comprising phenyl moieties

Investigation of photopolymerization kinetics of 4-(4-methacryloyloxyphenyl)-butan-2-one (1) in comparison with 2-phenoxyethyl methacrylate (2) and phenyl methacrylate (3) using a UV-LED emitting at 395 nm shows significantly faster polymerization of 1 compared to both 2 and 3 at 40°C. Vitrification affects photopolymerization kinetics of all methacrylates under investigation. Interestingly, quantitative final conversion is observed during photoinitiated polymerization of 1 and 2 whereas 3 shows limited conversion at about 80%. Furthermore, higher degree of polymerization is obtained by photoinitiated polymerization of 1 compared to 2 and 3. This shows that the 3-oxobutyl substituent at the phenyl ring of 1 significantly affects both polymerization kinetics and final conversion of the photoinitiated polymerization. Moreover, an additional higher molecular weight fraction is observed in case of polymerization of 1 at 85°C that is above the glass transition temperature of the polymer formed during photoinitiated polymerization. As a thermal polymerization at 85°C in the absence of light results in a high molecular weight polymer as well, an additional thermal process may be discussed as reason for the higher molecular weight polymer fraction in case of the photopolymer made at 85°C.     

NIR Light-Induced ATRP for Synthesis of Block Copolymers Comprising UV-Absorbing Moieties

NIR exposure at 790 nm activated photopolymerization of monomers comprising UV-absorbing moieties by using [Cu^II/(TPMA)]Br₂ (TPMA=tris(2-pyridylmethyl)amine) in the ppm range and an alkyl bromide as initiator. Some of them comprised structural elements selected either from those showing proton transfer or photocycloaddition upon UV excitation. Polymers obtained comprise living end groups serving as macroinitiator for controlled synthesis of block copolymers with relatively narrow molecular weight distributions. Chromatographic results indicated formation of block copolymers produced by this synthetic approach. Free-radical polymerization of monomers pursued for comparison exhibited the expected broader dispersity of molecular weight compared to photo-ATRP. Polymerization of these monomers by UV photo-ATRP failed on the contrary to NIR photo-ATRP demonstrating the UV-filter function of the monomers. This work conclusively provides a new approach for the polymerization of monomers comprising UV-absorbing moieties through photo-ATRP in the NIR region. This occurred in a simple and efficient pathway. However, studies also showed that not all monomers chosen successfully proceeded in the NIR photo-ATRP protocol.     

Enhanced In situ Activity of Peroxidases and Lignification of Root Tissues after Exposure to Non-Thermal Plasma Increases the Resistance of Pea Seedlings

Improving the germination of economically important crops and the condition of young plants is a major challenge currently facing agricultural practice. Pea (Pisum sativum L.) is one of the four most important cultivated legumes, along with groundnut (Arachis hypogaea L.), soybean (Glycine max L.) and beans (Phaseolus vulgaris L.). Due to the high protein content (23–33%), there is an interest in growing this crop as a source of protein for humans and animals. In this study, we focused on the effect of Cold Atmospheric Pressure Plasma (CAPP) on the decontamination and germination of pea seeds, on young seedling growth and production parameters, and on increasing their resistance and mechanical strength. We can state that germination increased by 10 to 25% after plasma treatment, and the most significant decontamination effect was detected when using non-thermal plasma generated in the ambient air (A-variants) and in the nitrogen atmosphere (N-variants). The increased in situ activity of peroxidases (POX) in the cell walls of A-variants and N-variants is also closely related to the increase in the mechanical strength of the cell walls and thus contributes to the higher resistance of these seedlings. This is also illustrated by the differences in lignin deposition among the different variants after CAPP treatment. To our knowledge, this is the first study concerning the influence of CAPP on the lignification of root tissues and on increasing the strength and resistance of plants.

     

Impedimetric Detection of DNA Damage with the Sensor Based on Silver Nanoparticles and Neutral Red

Novel electrochemical DNA‐sensor based on glassy carbon electrode (GCE) modified with Ag nanoparticles, Neutral red covalently attached to its surface and native DNA adsorbed on modifier coating was developed for the estimation of DNA damage on example of model system based on Fenton reagent. As was shown, the oxidation process resulted in synchronous increase of electron transfer resistance and capacitance measured by electrochemical impedance spectroscopy (EIS). The contribution of each sensor component on the signal was specified and sensitivity estimated against similar surface coatings. The shift of EIS parameters was found to be higher than that of similar biosensors reported. The DNA sensor was tested on the estimation of antioxidant capacity of green tea infusions again the results of coulometric titration with electrogenerated bromine.     

Next‐Generation o‐Nitrobenzyl Photolabile Groups for Light‐Directed Chemistry and Microarray Synthesis

Light as an external trigger is a valuable and easily controllable tool for directing chemical reactions with high spatial and temporal accuracy. Two o‐nitrobenzyl derivatives, benzoyl‐ and thiophenyl‐NPPOC, undergo photo‐deprotection with significantly improved efficiency over that of the commonly used NPPOC group. The two‐ and twelvefold increase in photo‐deprotection efficiency was proven using photolithograph synthesis of microarrays.     

Actual Isothermal Effects of Water‐Filtered Infrared A‐Irradiation

In this study, the athermal effects of water‐filtered infrared A (wIRA)‐irradiation (780–1400 nm) on human dermal fibroblasts were investigated. For this purpose, cells were exposed to wIRA‐irradiation (178 mW cm^?2 for 1 h), while a sophisticated experimental setup prevented warming of the samples exceeding 0.1°C. The investigated parameters were the formation of reactive oxygen species (ROS), mitochondrial membrane potential and superoxide release, protein oxidation, proliferation rate, as well as intracellular Ca²⁺‐release in single cells, most of them quantified via fluorescence microscopy and fluorimetric techniques. The existence of actual athermal wIRA‐effects is still intensively discussed, since their detection requires a careful experimental setup and both efficient and powerful temperature regulation of the exposed samples. Here, we can definitively show that some of the supposed athermal wIRA‐effects may be rather artifacts, since wIRA did not reveal any impact on the above mentioned parameters—as long as the temperature of the exposed cells was carefully maintained. Though, we were able to identify an athermal DNA‐protective wIRA‐effect, since the induced DNA damage (quantified via 8‐Oxo‐G‐formation) was significantly decreased after a subsequent UVB‐exposure. These results suggest that many of the supposed athermal wIRA‐effects can be induced by pure warming of the samples, independent from any wIRA‐irradiation.     

Cyanines comprising barbiturate group facilitate NIR-light assisted ATRP under anaerobic and aerobic conditions at two wavelengths using Fe(III) catalyst

Cyanines with heptamethine pattern namely 5-(6-(2-(3-ethyl-1,1-dimethyl-1H-benzo[e]indol-2(3H)-ylidene)ethylidene)-2-(2-(3-ethyl-1,1-dimethyl-1H-benzo[e]indol-3-ium-2yl) vinyl) cyclo-hex-1-en-1-yl)-1,3-dimethyl-2,6-dioxo-1,2,3,6-tetrahydropyrimidin-4-olate comprising a barbiturate group facilitate controlled radical polymerization using FeBr₃ in the ppm range applying radiation at 790 nm. Tris(4-methoylphenyl)phosphine, Tris(2-pyridylmethyl)amine or tetrabutylammonium bromide served as ligand. The latter showed the best performance resulting in a system needing no amino nitrogen for photo-ATRP. Ethyl α-bromophenylacetate worked as initiator. The cyanine interacts with FeBr₃ resulting in a new absorption band at 877 nm that also resulted in formation of polymer exhibiting similar molecular weight but higher dispersity compared to that obtained by 790 nm radiation by exposure with a light-emitting diode (LED) emitting at 870 nm. This explains the reactivity of the system while other cyanines such as 2-[2-[3-[2-(1,3-Dihydro-1,3,3-trimethyl-2H-indol-2-ylidene)-ethylidene]-2-(1-phenyl- 1H-tetrazol-5-ylsulfanyl)-1-cyclohexen-1-yl]-ethenyl]-1,3,3-trimethyl-3H-indolium chloride showed no activity by exposure at 790 nm in combination with FeBr₃/Br⁻. Controlled radical polymerization was confirmed by successful chain extension and block copolymerization experiments resulting in polymers, which exhibit a dispersity of about 1.3. Interestingly, the new system comprising the aforementioned barbiturate substituted cyanine, FeBr₃/Br⁻ and ethyl α-bromophenylacetate showed a certain oxygen tolerance. Polymers obtained exhibited similar dispersity as those made under inert conditions.