Functional zinc(II) phthalocyanines bearing Schiff base complexes as oxidation catalysts for bleaching systems

Oxidation catalysis is used to increase the performance of hydrogen peroxide in laundry bleach applications. Bleach catalysts provide cost‐effective, energy‐saving and environmentally friendly bleach systems yielding perfect stain removal at lower temperatures. This comparative study is based on the synthesis of bis[bis(salicylhydrazonephenoxy)manganese(III)] phthalocyaninatozinc(II) ( 2 ), bis[bis(salicylhydrazonephenoxy)cobalt(III)] phthalocyaninatozinc(II) ( 3 ) and bis[bis(salicylhydrazonephenoxy)iron(III)] phthalocyaninatozinc(II) ( 4 ) as tri‐nuclear complexes consisting of two Schiff base complexes substituting a zinc phthalocyanine. Complexion on the periphery to obtain complexes 2 , 3 , 4 was performed through the reaction of a Schiff base‐substituted phthalocyanine using MnCl₂?4H₂O, CoCl₂?6H₂O or FeCl₃?6H₂O salts in basic condition in dimethylformamide. Fourier transform infrared, ¹H NMR, ¹³C NMR, UV–visible, inductively coupled plasma optical emission and mass spectra were applied to characterize the prepared compounds. The bleach performances of the three phthalocyanine compounds 2 , 3 , 4 were examined by the degradation of morin as hydrophilic dye. The degradation progress in the presence of catalysts 2 , 3 , 4 /H₂O₂ combination in aqueous solution was investigated using an online spectrophotometric method. It was found that the catalysts 2 , 3 , 4 exhibited better bleaching performance at 25 °C than tetraactylethylethylenediamine as bleach activator used in powder detergent formulations for stain removal. Copyright © 2015 John Wiley & Sons, Ltd.     

Investigation of suitable digestion methods for the determination of total phosphorus in soils

Total phosphorus in five soils with different compositions which were obtained from different places were extracted by using Na(2)CO(3) fusion, HClO(4) digestion, HClO(4) + HNO(3) digestion, HF + HClO(4) digestion or NaOBr oxidation methods. In order to test the suitability of the HF + HClO(4) digestion the results obtained by this method were compared with the others above, especially the Na(2)CO(3) fusion which is accepted as a standard method. The phosphorus amount found with the HF + HClO(4) digestion method were almost the same as the phosphorus amount by the Na(2)CO(3) fusion method, while the superiority in extracting phosphorus when compared to other methods were obvious. The methods used in the study were evaluated according to the recovery of total phosphorus, ease of application and rapidity with which they were performed. Orthophosphate in the soil extracts was determined by the molybdenum blue colour method. The relationships between methods are examined statistically.     

Global Forcing Number of Benzenoid Graphs

A global forcing set in a simple connected graph G with a perfect matching is any subset S of E(G) such that the restriction of the characteristic function of perfect matchings of G on S is an injection. The number of edges in a global forcing set of the smallest cardinality is called the global forcing number of G. In this paper we prove several results concerning global forcing sets and numbers of benzenoid graphs. In particular, we prove that all catacondensed benzenoids and catafused coronoids with n hexagons have the global forcing number equal to n, and that for pericondensed benzenoids the global forcing number is always strictly smaller than the number of hexagons.     

Ground-state properties of benzenoid hydrocarbons by simple bond orbital resonance theory approach

π-electron energies and bond orders of benzenoid hydrocarbons with up to five fused hexagons have been considered by the simple Bond Orbital Resonance Theory (BORT) approach. The corresponding ground states were determined according to four BORT models. In the first three models a diagonalisation of the Hückel-type Hamiltonian was performed in the bases of Kekulé, of Kekulé and mono-Claus and of Kekulé and Claus resonance structures, respectively. In the fourth model a simple BORT ansatz was used. According to this ansatz, the ground state is a linear combination of the positive Kekulé structures, all with equal coefficients. It was shown that π-electron energies and bond orders obtained by these models correlate much better with the PPP energies and bond orders than with the Hückel energies and bond orders. This indicates that a simple BORT approach is quite reliable in predicting the more sophisticated PPP results. Concerning the relative performance of the four BORT models, the best results were obtained with the BORT ansatz. The performance deteriorates with the expansion of the basis set. This is attributed to the fact that in these models the improvement of the basis set is not accompanied with the corresponding improvement of the Hamiltonian. Comparing the BORT-ansatz bond orders with the Pauling bond orders, it was shown that BORT-ansatz bond orders correlate much better with the PPP bond orders. This revised version was published online in July 2006 with corrections to the Cover Date.     

Heats of atomization of some conjugated molecules containing nitrogen or oxygen by a novel semiempirical method

Heats of atomization for a range of conjugated molecules containing nitrogen or oxygen are calculated by a semiempirical method that combines some features of both the MO and VB theories. The π ground state of each conjugated molecule is represented as a linear combination of Kekulé structures. Unlike in the VB theory, each Kekulé structure is a determinant containing bond orbitals. Here experimental heats of atomization are reproduced approximately as well as by the more sophisticated SCF –MO approach. The use of this method is, however, much simpler since it amounts to a single diagonalization of a matrix of the order equal to the number of Kekulé structures only.     

On lower bounds of number of perfect matchings in fullerene graphs

Couting perfect matchings in graphs is a very difficult problem. Some recently developed decomposition techniques allowed us to estimate the lower bound of the number of perfect matchings in certain classes of graphs. By applying these techniques, it will be shown that every fullerene graph with p vertices contains at least p/2+1 perfect matchings. It is a significant improvement over a previously published estimate, which claimed at least three perfect matchings in every fullerene graph. As an interesting chemical consequence, it is noted that every bisubstituted derivative of a fullerene still permits a Kekulé structure.     

The sorption behavior of a nickel-insolubilized humic acid system in a column arrangement

The sorption characteristics of insolubilized humic acid (IHA) were investigated for Ni (II) in a column arrangement. The sodium form of the IHA (INaA) was used as a solid phase. Column operations were performed with five steps and all of them were monitored continuously by a flowthrough cell-adapted UV-Vis spectrophotometer. Thus, all solid-phase extraction (SPE) steps were visualized by breakthrough curves and analyses progress were evaluated. However, all calculations and evaluations were focused on the atomic absorption spectrophotometric (AAS) analyses of the solutions collected during the stripping steps. There was a high correlation (r(2), 0.972) between peak area and AAS data of stripping steps. The effect of concentration and pH of the loading solution onto sorption of Ni (II) by INaA was investigated. Sorption characteristics were evaluated by using Freundlich, Langmuir, and Dubinin-Radushkevich (D-R) adsorption isotherms, as well as by Scatchard plot analysis. Multilayer sorption was found to be agreeable for Ni (II). From the D-R isotherm the mean free energy of sorption (E) was calculated (6.65 kJ mol(-1)) and attributed to the multilayer sorption. Finally, the sorption characteristic of the INaA-Ni (II) system was compared with that of the INaA-Cu (II) system, and possible separation of two ions in a binary mixture system is discussed.     

A simple method for the calculation of π-bond orders in alternant hydrocarbons

A new method for the calculation of bond orders in alternant hydrocarbons is presented. The method requires a summation over the contributions of various superposition diagrams. Quantitatively, the method is almost as reliable as PPP, and due to its simplicity it can be used for fast and relatively accurate calculation of bond orders. In addition some simple rules are derived, which in many cases can be used to predict the signs of bond orders between nonbonded atoms.Dedicated to Professor J. Koutecký on the occasion of his 65th birthdayResearch supported by the Robert A. Welch Foundation of Houston, Texas