光纤基底TiNi形状记忆合金薄膜制备工艺

将TiNi基记忆合金薄膜与光纤相结合可制成智能化、集成化且成本经济的微机电系统和微传感器件.本文采用磁控溅射法在二氧化硅光纤基底上制备TiNi记忆合金薄膜,系统讨论了溅射工艺参数以及后续退火处理对薄膜质量的影响.采用自研制光纤镀膜掩膜装置在直径为125μm的光纤圆周表面上形成均匀薄膜.实验表明:在靶基距、背底真空度、Ar气流量和溅射时间一定的条件下,溅射功率存在最佳值;溅射压强较大时,薄膜沉积速率较低,但薄膜表面粗糙度较小.进行退火处理后,薄膜形成较良好的晶体结构,Ti_49.09Ni_50.91薄膜中马氏体B19′相和奥氏体B2相共存,但以B19′为主.根据本文研究结果,在玻璃光纤基底上制备高质量的TiNi基记忆合金薄膜是可实现的,本工作为下一步研制微机电系统和微型传感器做了基础准备.     

Two new aromadendrane sesquiterpenes from Verticillium psalliotae

The chemical constituents of the fungus Verticillium psalliotae were studied. Two new aromadendrane sesquiterpenes inonotin M (1) and inonotin N (2) were isolated from the EtOAc extract of the fungal culture broth. The structures of compounds were elucidated mainly by HRESIMS experiments, and 1D, 2D-NMR spectroscopy analysis.     

Conformational Changes and Redox Properties of Bimetallic Single Helicates of Hexapyrrole-α,ω-dicarbaldehydes

The hexapyrrole-α,ω-dicarbaldehydes 1 a and 1 b were metallated with Cu^II, Ni^II, and Pd^II to give bimetallic complexes where a pair of 3 N+O four-coordinate metal planes are helically distorted and the central 2,2′-bipyrrole subunit adopts a cis or trans conformation. X-ray crystallographic analysis of the bisCu complex revealed a closed form with a cis-2,2′-bipyrrole subunit and an open form with a trans-2,2′-bipyrrole subunit. The bisPd complexes took a closed form both in the solid state and in solution. They are regarded as single helicates of two turns and the energy barrier for the interchange between an M helix and a P helix was remarkably influenced by the bulky 3,3′-substituent of the central 2,2′-bipyrrole subunit. Although the bisNi complexes adopt a closed form in the solid state, they exist as a homohelical open C₂-symmetric form or a heterohelical open C_i-symmetric form in solution. A theoretical study suggested that the closed form of 1 a Pd was stabilized by the Pd–Pd interaction. Compound 1 a Pd was reversibly oxidized by one electron at 0.14 V versus ferrocene/ferrocenium (Fc/Fc⁺) and this oxidized species showed Vis/NIR absorption bands at λ=767 and 1408 nm.     

A new dimeric alkylresorcinol from the stem barks of Swintonia floribunda (Anacardiaceae)

From an EtOAc-soluble fraction of the stem barks of Swintonia floribunda (Anacardiaceae), one new dimeric alkylresorcinol named integracin E (1), together with 4 known compounds (2–5) were isolated. Their chemical structures were elucidated based on the spectroscopic data interpretation. The absolute configuration of 1 was determined by the specific rotation analysis of its acid-catalyzed hydrolysis product. Compound 1 showed potent tyrosinase inhibitory activity with an IC₅₀ value of 48.2?μM.     

Compact Difference Schemes on a Three-Point Stencil for Second-Order Hyperbolic Equations

Differential Equations - We consider compact difference schemes of approximation order $$4+2 $$ on a three-point spatial stencil for the Klein–Gordon equations with constant and variable...     

Quantitative analysis of precious metals in automotive shredder residue/combustion residue via EDX fluorescence spectrometry

The recovery of precious metals from automotive shredder residue (ASR) dust/combustion residue is an option that is not usually considered due to the lack of available information. Therefore, before any disposal or recovery application can be considered, it is necessary to determine the significance of the levels and distribution of precious metal in ASR dust/ASR combustion residue. In the present study, quantitative analysis of precious metals (Pt, Pd, Au, Ag and Cu) in the ASR residue samples was performed using energy dispersive X-ray (EDX) fluorescence spectrometer. With the fundamental parameter (FP) method, the X-ray intensity is obtained and the quantitative analysis is performed using theoretical calculation. This method is very effective for quantitative analysis of unknown samples without standard samples. Further, in order to analyse the precious metal distribution within the ASR combustion residues, the microstructural characterisation and elemental mapping were also carried out with the aid of field emission scanning election microscopy combined with electron dispersive spectroscopy (FE-SEM EDS). Significant amount of Pt, Pd, Au, Ag and Cu element concentrations in the ASR residue were identified. Total precious (Pt, Pd, Au, Ag and Cu) metals obtainable values are representing about 12.23 wt% from its initial ASR dust/combustion residues. Considering their relevant concentrations, these metals should be properly recovered for recycling purposes before to dispose or landfill.     

The Active Sites of a Rod‐Shaped Hollandite DeNOx Catalyst

The identification of catalytically active sites (CASs) in heterogeneous catalysis is of vital importance to design and develop improved catalysts, but remains a great challenge. The CASs have been identified in the low‐temperature selective catalytic reduction of nitrogen oxides by ammonia (SCR) over a hollandite manganese oxide (HMO) catalyst with a rod‐shaped morphology and one‐dimensional tunnels. Electron microscopy and synchrotron X‐ray diffraction determine the surface and crystal structures of the one‐dimensional HMO rods closed by {100} side facets and {001} top facets. A combination of X‐ray absorption spectra, molecular probes with potassium and nitric oxide, and catalytic tests reveals that the CASs are located on the {100} side facets of the HMO rods rather than on the top facets or in the tunnels, and hence semi‐tunnel structural motifs on the {100} facets are evidenced to be the CASs of the SCR reaction. This work paves the way to further investigate the intrinsic mechanisms of SCR reactions.     

Redox‐responsive core cross‐linked micelles of poly(ethylene oxide)‐b‐poly(furfuryl methacrylate) by Diels‐Alder reaction for doxorubicin release

Redox‐responsive core cross‐linked (CCL) micelles of poly(ethylene oxide)‐b‐poly(furfuryl methacrylate) (PEO‐b‐PFMA) block copolymers were prepared by the Diels‐Alder click‐type reaction. First, the PEO‐b‐PFMA amphiphilic block copolymer was synthesized by the reversible addition‐fragmentation chain transfer polymerization. The hydrophobic blocks of PFMA were employed to encapsulate the doxorubicin (DOX) drug, and they were cross‐linked using dithiobismaleimidoethane at 60 °C without any catalyst. Under physiological circumstance, the CCL micelles demonstrated the enhanced structural stability of the micelles, whereas dissociation of the micelles took place rapidly through the breaking of disulfide bonds in the cross‐linking linkages under reduction environment. The core‐cross‐linked micelles showed fine spherical distribution with hydrodynamic diameter of 68 ± 2.9  nm. The in vitro drug release profiles presented a slight release of DOX at pH 7.4, while a significant release of DOX was observed at pH 5.0 in the presence of 1,4‐dithiothreitol. MTT assays demonstrated that the block copolymer did not have any practically cytotoxicity against the normal HEK293 cell line while DOX‐loaded CCL micelles exhibited a high antitumor activity towards HepG2 cells. © 2016 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2016 , 54, 3741–3750