Polymer nanoparticles with a sensitive CO2‐responsive hydrophilic/hydrophobic surface

Poly(methyl methacrylate) (PMMA) nanoparticles with a sensitive CO₂‐responsive hydrophilic/hydrophobic surface that confers controlled dispersion and aggregation in water were prepared by emulsion polymerization at 50 °C under CO₂ bubbling using amphiphilic diblock copolymers of 2‐dimethylaminoethyl methacrylate (DMAEMA) and N‐isopropyl acrylamide (NIPAAm) as an emulsifier. The amphiphilicity of the hydrophobic–hydrophilic diblock copolymer at 50 °C was triggered by CO₂ bubbling in water and enabled the copolymer to serve as an emulsifier. The resulting PMMA nanoparticles were spherical, approximately 100 nm in diameter and exhibited sensitive CO₂/N₂‐responsive dispersion/aggregation in water. Using copolymers with a longer PNIPAAm block length as an emulsifier resulted in smaller particles. A higher concentration of copolymer emulsifier led to particles with a stickier surface. Given its simple preparation and reversible CO₂‐triggered amphiphilic behavior, this newly developed block copolymer emulsifier offers a highly efficient route toward the fabrication of sensitive CO₂‐stimuli responsive polymeric nanoparticle dispersions. © 2019 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2019, 57, 2149–2156     

Bis-tridentate IrIII Phosphors Bearing Two Fused Five-Six-Membered Metallacycles: A Strategy to Improved Photostability of Blue Emitters

Iridium complexes bearing chelating cyclometalates are popular choices as dopant emitters in the fabrication of organic light-emitting diodes (OLEDs). In this contribution, we report a series of blue-emitting, bis-tridentate Ir^III complexes bearing chelates with two fused five-six-membered metallacycles, which are in sharp contrast to the traditional designs of tridentate chelates that form the alternative, fused five-five metallacycles. Five Ir^III complexes, Px-21 – 23 , Cz-4 , and Cz-5 , have been synthesized that contain a coordinated dicarbene pincer chelate incorporating a methylene spacer and a dianionic chromophoric chelate possessing either a phenoxy or carbazolyl appendage to tune the coordination arrangement. All these tridentate chelates afford peripheral ligand–metal–ligand bite angles of 166–170°, which are larger than the typical bite angle of 153–155° observed for their five-five-coordinated tridentate counterparts, thereby leading to reduced geometrical distortion in the octahedral frameworks. Photophysical measurements and TD-DFT studies verified the inherent transition characteristics that give rise to high emission efficiency, and photodegradation experiments confirmed the improved stability in comparison with the benchmark fac-[Ir(ppy)₃] in degassed toluene at room temperature. Phosphorescent OLED devices were also fabricated, among which the carbazolyl-functionalized emitter Cz-5 exhibited the best performance among all the studied bis-tridentate phosphors, showing a maximum external quantum efficiency (EQE_max) of 18.7 % and CIE_x,y coordinates of (0.145, 0.218), with a slightly reduced EQE of 13.7 % at 100 cd m⁻² due to efficiency roll-off.     

Diastereoselective Cyclobutenol Synthesis: A Heterogeneous Palladium-Catalyzed Oxidative Carbocyclization-Borylation of Enallenols

A highly selective and efficient oxidative carbocyclization/borylation of enallenols catalyzed by palladium immobilized on amino-functionalized siliceous mesocellular foam (Pd-AmP-MCF) was developed for diastereoselective cyclobutenol synthesis. The heterogeneous palladium catalyst can be recovered and recycled without any observed loss of activity or selectivity. The high diastereoselectivity of the reaction is proposed to originate from a directing effect of the enallenol hydroxyl group. Optically pure cyclobutenol synthesis was achieved by the heterogeneous strategy by using chiral enallenol obtained from kinetic resolution.     

Ionic Conductivity of β‐Cyclodextrin–Polyethylene‐Oxide/Alkali‐Metal‐Salt Complex

Highly conductive, crystalline, polymer electrolytes, β‐cyclodextrin (β‐CD)–polyethylene oxide (PEO)/LiAsF₆ and β‐CD–PEO/NaAsF₆, were prepared through supramolecular self‐assembly of PEO, β‐CD, and LiAsF₆/NaAsF₆. The assembled β‐CDs form nanochannels in which the PEO/X⁺ (X=Li, Na) complexes are confined. The nanochannels provide a pathway for directional motion of the alkali metal ions and, at the same time, separate the cations and the anions by size exclusion.     

Fe K‐Edge X‐ray Absorption Fine Structure Determination of γ‐Al2O3‐Supported Iron‐Oxide Species

The structure of FeO_x species supported on γ‐Al₂O₃ was investigated by using Fe K‐edge X‐ray absorption fine structure (XAFS) and X‐ray diffraction (XRD) measurements. The samples were prepared through the impregnation of iron nitrate on Al₂O₃ and co‐gelation of aluminum and iron sulfates. The dependence of the XRD patterns on Fe loading revealed the formation of α‐Fe₂O₃ particles at an Fe loading of above 10 wt %, whereas the formation of iron‐oxide crystals was not observed at Fe loadings of less than 9.0 wt %. The Fe K‐edge XAFS was characterized by a clear pre‐edge peak, which indicated that the Fe?O coordination structure deviates from central symmetry and that the degree of Fe?O?Fe bond formation is significantly lower than that in bulk samples at low Fe loading (<9.0 wt %). Fe K‐edge extended XAFS oscillations of the samples with low Fe loadings were explained by assuming an isolated iron‐oxide monomer on the γ‐Al₂O₃ surface.     

Distortion theorems for normalized biholomorphic quasi-convex mappings

In this paper, we will use the Schwarz lemma at the boundary to character the distortion theorems of determinant at the extreme points and distortion theorems of matrix on the complex tangent space at the extreme points for normalized locally biholomorphic quasi-convex mappings in the unit ball B ⁿ respectively.     

Salt Metathesis: Tetrafluoroborate Anion Rapidly Fluoridates Organoboronic Acids to give Organotrifluoroborates

Tetrafluoroborate (BF₄⁻) has long been used as a spectator counter anion. Herein, we report an unprecedented salt metathesis between a variety of BF₄⁻ salts and a series of organoboronic acids yielding the corresponding organotrifluoroborates. We identified conditions for fast and efficient fluoridation (<1 h) with minimal workup. Fundamentally, this work discloses the proclivity of BF₄⁻ to exchange fluoride atoms with organoboronates, highlighting the lability of BF₄⁻.     

CeO2修饰Ni3S2纳米片用于高效电催化析氧

电化学水分解制氢作为重要的生产氢能的新能源技术,包括氢气析出反应(HER)和氧气析出反应(OER).然而,OER进行的是多步电子转移过程,动力学过程缓慢且过电位高,严重制约了电解水制氢的发展.因此开发低成本、高效稳定的非贵金属催化剂替代贵金属催化剂(RuO2,IrO2)来降低过电位,减少能源消耗十分必要.Ni₃S₂由于其高导电性、高活性、低成本等优点,具有作为贵金属催化剂替代品的广阔应用前景,但其OER性能仍需进一步提高.对已有的有效OER催化剂进行表界面调控是提高催化剂性能的一种有效策略.CeO₂中的Ce3+和Ce4+价态之间可以灵活过渡,使其具有良好的电子/离子导电性、可逆的表面氧离子交换和较高的储氧能力.CeO₂的多价性使其有机会与其它基质产生强烈的电子相互作用,良好的电子/离子导电性和较高的储氧能力是提高催化剂析氧活性的有利因素.因此,用CeO₂对Ni₃S₂进行修饰是提高其析氧活性的有效途径.基于此,本文运用水热和电沉积相结合的方法将CeO₂修饰到Ni₃S₂纳米片上,制备得到生长于泡沫镍上的Ni₃S₂-CeO₂纳米片阵列(Ni₃S₂-CeO₂/NF),并运用X射线粉末衍射(XRD)、扫描电镜(SEM)、透射电镜(TEM)、X射线光电子能谱(XPS)等手段进行了表征,以三电极系统测试了其电催化析氧性能及稳定性,并通过密度泛函理论计算进行了验证.XRD结果表明,复合材料中确实存在Ni₃S₂和CeO₂.通过SEM发现,泡沫镍基底上均匀分布着Ni₃S₂纳米片阵列;电沉积CeO₂后,Ni₃S₂-CeO₂仍保持其纳米片特性,但表面变得粗糙.Ni₃S₂-CeO₂的TEM结果也证实了纳米片结构的形成,高分辨率TEM图像清晰的显示出Ni₃S₂和CeO₂之间具有明显的界面.XPS结果表明,Ni₃S₂-CeO₂的Ni 2p的结合能与Ni₃S₂相比出现负位移.与纯CeO₂的Ce 3d谱图相比,Ni₃S₂-CeO₂杂化体系中Ce4+的比例明显增加,表明Ce的价态发生了重排,部分电子转移给了Ni元素.这些结果均说明Ni₃S₂与CeO₂之间存在着较强的电子相互作用.相应的电催化测试结果显示,在1.0 M KOH中,当电流密度达到20 mA cm^–2时,Ni₃S₂/NF需提供356 mV的过电位,Ni₃S₂-CeO₂/NF只需264 mV的过电位,仅次于RuO2/NF.而且,Ni₃S₂-CeO₂/NF在中性条件下也显示出了较理想的析氧活性.Ni₃S₂-CeO₂/NF的Tafel斜率明显低于CeO₂/NF和Ni₃S₂/NF,表明其具有良好的OER反应动力学.循环伏安法和计时电位法结果均表明,Ni₃S₂-CeO₂/NF具有良好的电化学稳定性.电化学阻抗谱测试结果表明,与Ni₃S₂/NF和CeO₂/NF相比,Ni₃S₂-CeO₂/NF明显具有更小的半圆直径,说明其电荷转移阻抗更小,进一步表明CeO₂的修饰有助于催化过程中电子的快速转移.在非法拉第区域的循环伏安扫描曲线以及拟合扫描速度对电容电流曲线结果显示,Ni₃S₂-CeO₂/NF的最大电容值大于CeO₂/NF和Ni₃S₂/NF,表明其暴露了更多的活性位点,具有更大的电化学活性表面积;而且,Ni₃S₂-CeO₂/NF在400和500 mV时的电催化析氧转换频率明显高于Ni₃S₂/NF和CeO₂/NF,进一步说明Ni₃S₂-CeO₂/NF具有更高的本征催化活性.密度泛函理论计算表明,由于^*OH,^*O和^*OOH与Ni₃S₂-CeO₂中的Ni和Ce原子相互作用的存在,使得反应中间产物与Ni₃S₂-CeO₂之间的结合强度较纯Ni₃S₂或CeO₂强,使其显示出了更高的OER性能.在经过24 h连续电解后,SEM和TEM结果均表明,Ni₃S₂-CeO₂/NF材料仍保持了其纳米片形貌.稳定性测试后的XPS结果表明,Ni 2p对应的峰强度降低,而与氧化镍物种对应的峰强度增强;S元素在Ni₃S₂-CeO₂表面的信号强度明显降低.根据文献报道,在强烈的氧化环境下,过渡金属硫化物会部分转化为氧化物或氢氧化物,这通常被认为是OER过程的实际催化物种.