A simplified approach to the generalized standard-addition method and its application in electrothermal atomic absorption spectrometry

A simple and general standard-addition method for a single-component determination is presented. The method uses two independent variables for the calculation of the analyte concentration (the amount of sample taken and the amount of analyte added) and one dependent variable, the response. The sensitivity and the response of the blank can also be estimated from the model by changing the amount of the sample and the amount of the analyte addition. In the simples case, a linear equation is assumed to exist between the variables. Geometrically, the model can be expressed by the response plane in the variable-space. The method has all the advantages of the ordinary standard-addition method but also includes automatic blank elimination and versatile matrix-interference control. Two examples of the use of the method are based on graphite-furnace atomic absorption spectrometry of chromium and lead. Standard statistical packages are applied.     

X-ray study on the effect of moisture on the crystalline state of cellulose

A method is presented for measuring the change of the intensity of x-ray diffraction peaks of cellulose specimens as a consequence of humidity changes of the specimens. Measurements performed showed a decrease of this intensity after drying pulp specimens initially kept in humid air. Thus the order in cellulose decreased during drying.     

Comparison of different amino acid derivatives and analysis of rat brain microdialysates by liquid chromatography tandem mass spectrometry

The efficiencies of three derivatisation reagents that react with either the amine (9-fluorenylmethyl chloroformate (FMOC)) or the carboxylic acid group (butanol) of amino acid or with both types of functional groups (propyl chloroformate) were compared in the analysis of amino acids by liquid chromatography-electrospray-tandem mass spectrometry (LC-ESI-MS/MS). Separation of 20 amino acids derivatised with these three reagents was studied on reversed-phase chromatography. Linearity, repeatability and limits of detection of the LC-ESI-MS/MS method were determined by analysing FMOC-, butanol- and propyl chloroformate-derivatised lysine, β-aminobutyric acid, threonine and glutamic acid. The limits of detection for the derivatised amino acids (7.5-75 fmol) were as much as 2-60 times lower than those of the corresponding underivatised molecules. The best linearity was observed for amino acids derivatised with propyl chloroformate or butanol (r² = 0.996-0.999, range = 100-8500 nmol L⁻¹). Propyl chloroformate was the best suited of the reagents tested for the analysis of amino acids with LC-MS/MS and was used for the analysis of amino acids in rat brain microdialysis samples.     

Discovery of neurosteroid glucuronides in mouse brain

Neurosteroid glucuronides were found for the first time in brain samples. The intact glucuronides were extracted from the cortex, hippocampus, hypothalamus, and mid-brain tissues of nicotine- and water-treated mice, and detected with capillary liquid chromatography-electrospray-tandem mass spectrometry (CapLC-ESI-MS/MS). The glucuronides of estradiol, cortisol, corticosterone, tetrahydrodeoxycorticosterone, pregnenolone, and isopregnanolone were identified by comparing retention times in selected reaction monitoring (SRM) chromatograms and the relative abundances of two SRM transitions of each neurosteroid glucuronide between the reference and authentic samples, thus providing reliable identification. In vitro experiments, carried out by using S9 fractions from mouse and rat brains, showed a formation of glucuronides with selected test compounds (corticosterone, pregnenolone, and dehydroepiandrosterone), suggesting that biosynthesis of neurosteroid glucuronides is possible in rodent brain.     

Determination of Mn, Fe, and Cu in chemically-treated wood pulps by the XRF addition method

A rapid X-ray fluorescence addition method has been developed for quantification of the technically most important metals in wood pulp matrix (Mn, Fe, and Cu). Pretreatment consisted of just two steps: first, acid was added to the sample to achieve homogeneous distribution of the metals; the pulp was then pressed lightly on to Mylar film. Total analysis time was less than 10 min. The concentration range investigated was up to 15 mg kg^–1 for Mn and up to 5 mg kg^–1 for Fe and Cu. Metal concentrations in Scandinavian pulps are not expected to exceed these amounts. The quantification limit was 2 mg kg^–1 for all three metals. The reproducibilities and repeatabilities were concentration-dependent and varied between 3 and 19% and between 1 and 17%, respectively. The squares of the linear correlation coefficients between measured intensity and added metal concentration were 0.994, 0.950, and 0.932 for Mn, Fe, and Cu, respectively. Received: 19 February 2001 / Revised: 17 April 2001 / Accepted: 19 April 2001     

X-ray measurement of cellulose crystallite orientation in cotton fibers

The orientation of crystallites in a bundle of parallel cotton fibers was studied by x-ray diffraction. The intensity distributions of the 101 and 002 diffraction rings showed the distributions of (101) and (002) planes to be identical within the limits of accuracy. Therefore, the crystallites in the cotton fibers very likely had random orientation about their long axes. The orientation distribution of these axes was calculated by using the intensity distribution of the 002 diffraction ring. The cylindrically symmetrical density distribution J(β) thus obtained was multiplied by sin β to obtain the distribution of relative numbers of crystallites at given angles β to the long axis of the fiber. The average 〈β〉 was found to be in agreement with the value of 〈sin²β〉 measured from the 002 diffraction ring. The intensity distributions on the 101 and 002 diffraction rings showed small fluctuations. These fluctuations appeared much stronger in the J(β) and sin β J(β) distributions, indicating clear discontinuities in the pitch angle distribution.     

An infrared spectroscopic method for quantitative analysis of fatty alcohols and fatty acid esters in machinery oils

A new infrared spectroscopic method suitable for determining total fatty alcohol and fatty acid ester concentrations in industrial oils has been developed. Oil samples were diluted with toluene (1:3 w/w), the toxicity and volatility of which are relatively low compared with more commonly used IR solvents, like carbon tetrachloride or carbon disulfide. Mixture standards were prepared from dodecanol, tetradecanol, octadecanol, methyl stearate and methyl palmitate. Some analytical and statistical tests were performed on the developed method. The recoveries and the repeatability of the method proved to be sufficient for the quantitative determination of fatty alcohol and fatty acid ester additives in industrial oils. Reproducibility testing in another laboratory also produced satisfactory results. The developed method also proved to be relatively quick and simple. This method was developed to satisfy industry’s need to determine the concentrations of these oil additives, and it has already been applied successfully in machinery oil analysis.     

Determination of Mn, Fe, and Cu in chemically-treated wood pulps by the XRF addition method

A rapid X-ray fluorescence addition method has been developed for quantification of the technically most important metals in wood pulp matrix (Mn, Fe, and Cu). Pretreatment consisted of just two steps: first, acid was added to the sample to achieve homogeneous distribution of the metals; the pulp was then pressed lightly on to Mylar film. Total analysis time was less than 10 min. The concentration range investigated was up to 15 mg kg^–1 for Mn and up to 5 mg kg^–1 for Fe and Cu. Metal concentrations in Scandinavian pulps are not expected to exceed these amounts. The quantification limit was 2 mg kg^–1 for all three metals. The reproducibilities and repeatabilities were concentration-dependent and varied between 3 and 19% and between 1 and 17%, respectively. The squares of the linear correlation coefficients between measured intensity and added metal concentration were 0.994, 0.950, and 0.932 for Mn, Fe, and Cu, respectively.     

Analysis of acetylcholine and choline in microdialysis samples by liquid chromatography/tandem mass spectrometry

A sensitive liquid chromatography/electrospray ionisation tandem mass spectrometric (LC/ESI-MS/MS) method was developed for the analysis of acetylcholine and choline in microdialysis samples. A Ringer's solution that contains high (150 mM) concentrations of inorganic salts was used to extract acetylcholine and choline from a rat or mouse brain. The separation of acetylcholine, choline, an internal standard acetyl-beta-methylcholine, endogenous compounds and inorganic cations was achieved with hydrophilic interaction chromatography using a diol column. The eluent consisted of 20 mM ammonium formate (pH 3.3) and acetonitrile (20:80) which is favourable for the ESI process. Limits of detection (signal-to-noise (S/N) ratio = 3) of 0.02 nM (0.2 fmol) for acetylcholine and 1 nM (10 fmol) for choline were observed using standards diluted in Ringer's solution. A good linearity was obtained from the limit of quantitation: 0.1 nM (S/N ratio = 10) to 50 nM (r = 0.999) for acetylcholine and within the concentration range of 100-3500 nM (r = 0.998) for choline. The between-day repeatability of the method was good; RSD was 3.1% at 1 nM level of acetylcholine and 3.5% at 1000 nM level of choline. The recoveries for addition of 1 or 2.5 nM acetylcholine and 0.2 or 1 microM choline in microdialysis balancing samples were between 93 and 101% indicating that no suppressing endogenous compounds were co-eluting with acetylcholine or choline. The developed method was applied to the analysis of microdialysis balancing samples collected from rat and mouse brains.