Surface Trapping and STM Observation of Conformational Isomers of a Bis(Terpyridine) Ligand from Metallosupramolecular Grids

Tetranuclear Co‐grid complexes incorporating bis‐tridentate ligands, namely 4,6‐bis(2,2′‐bipyrid‐6‐yl)‐2‐phenylpyrimidine, were electrosprayed onto a Au(111) substrate under an ultrahigh vacuum. Fragmentation occurs leaving the ligands in four different conformations. Most ligands are found to form H‐bonded dimers. The most abundant conformer of the ligand on the Au surface is an asymmetric form, which has not been observed before. The present results indicate that the fragmentation of coordination compounds during the deposition process, in principle, allows for surface trapping, identification, and investigation of high energy, out‐of‐equilibrium conformations of the ligand molecules at low temperatures, which otherwise would not be observable.     

Extraordinary Changes in the Electronic Structure and Properties of CdS and ZnS by Anionic Substitution: Cosubstitution of P and Cl in Place of S

Unlike cation substitution, anion substitution in inorganic materials such as metal oxides and sulfides would be expected to bring about major changes in the electronic structure and properties. In order to explore this important aspect, we have carried out first‐principles DFT calculations to determine the effects of substitution of P and Cl on the properties of CdS and ZnS in hexagonal and cubic structures and show that a sub‐band of the trivalent phosphorus with strong bonding with the cation appears in the gap just above the valence band, causing a reduction in the gap and enhancement of dielectric properties. Experimentally, it has been possible to substitute P and Cl in hexagonal CdS and ZnS. The doping reduces the band gap significantly as predicted by theory. A similar decrease in the band gap is observed in N and F co‐substituted in cubic ZnS. Such anionic substitution helps to improve hydrogen evolution from CdS semiconductor structures and may give rise to other applications as well.     

Conjugated Polymer Nanoparticle‐Triplet Emitter Hybrids in Aqueous Dispersion: Fabrication and Fluorescence Quenching Behavior

Conjugated polymer nanoparticles based on poly[9,9‐bis(2‐ethylhexyl)fluorene] and poly[N‐(2,4,6‐trimethylphenyl)‐N,N‐diphenylamine)‐4,4′‐diyl] are fabricated using anionic surfactant sodium dodecylsulphate in water by miniemulsion technique. Average diameters of polyfluorene and polytriarylamine nanoparticles range from 70 to 100 and 100 to 140 nm, respectively. The surface of the nanoparticles is decorated with triplet emitting dye, tris(2,2′‐bipyridyl)ruthenium(II) chloride. Intriguing photophysics of aqueous dispersions of these hybrid nanoparticles is investigated. Nearly 50% quenching of fluorescence is observed in the case of dye‐coated polyfluorene nanoparticles; excitation energy transfer is found to be the dominant quenching mechanism. On the other hand, nearly complete quenching of emission is noticed in polytriarylamine nanoparticle‐dye hybrids. It is proposed that the excited state electron transfer from the electron‐rich polytriarylamine donor polymer to Ru complex leads to the complete quenching of emission of polytriarylamine nanoparticles. The current study offers promising avenues for developing aqueous solution processed‐electroluminescent devices involving a conjugated polymer nanoparticle host and Ru or Ir‐based triplet emitting dye as the guest.

     

Task-specific ionic liquid tetraalkylammonium hydrogen phthalate as an extractant for U(VI) extraction from aqueous media

In this paper a quaternary ammonium based room temperature ionic liquid (IL) trioctylmethylammonium hydrogen phthalate has been reported as promising extractant for separation of U(VI) from other metal ions from aqueous media. The IL was synthesized via metathesis route and characterized using various techniques such as hydrogen nuclear magnetic resonance, electron spray ionization mass spectrometry and infra red etc. The newly synthesized IL was evaluated for extraction of U(VI), Th(IV), La(III), Y(III), Nd(III) and Fe(III) from aqueous solutions and follow the order: U(VI) > Th(IV) > Fe(III) > Y(III) >> Nd(III) ~ La(III).     

Transport of U(VI) from sulphuric acid medium across supported liquid membrane (SLM) containing di-(2-ethylhexyl) phosphoric acid (D2EHPA)/n-dodecane as a carrier

This paper reports on the supported liquid membrane (SLM) based transport studies of U(VI) from sulphate medium using di-(2-ethylhexyl) phosphoric acid/n-dodecane as carrier. Polytetrafluoroethylene membrane was used as solid support and H₂SO₄ as receiver phase. The effects of various parameters such as receiver phase concentration, feed acidity, carrier concentration, U(VI) concentration, membrane thickness and membrane pore size on U(VI) transport had been investigated. With increase in H₂SO₄ concentrations and pH of feed solution there is an increase in U(VI) transport across the SLM. Similarly with increase in membrane thickness the U(VI) transport decrease whereas in case of pore size variation reverse results are obtained. The membrane thickness variation results showed that the U(VI) transport across the SLM is entirely diffusion controlled and the diffusion coefficient the D _(o) was calculated as 1.36 × 10^?7 cm² s^?1. Based on optimized condition, a scheme had been tested for selective recovery of U(VI) from ore leach solution containing a large number of other metal ions.     

Thermohydraulics of turbulent flow through rectangular and square ducts with axial corrugation roughness and twisted-tapes with and without oblique teeth

The heat transfer and the pressure drop characteristics of turbulent flow of air (10,000 < Re < 100,000) through rectangular and square ducts with combined internal axial corrugations on all the surfaces of the ducts and with twisted-tape inserts with and without oblique teeth have been studied experimentally. The axial corrugations in combination with twisted-tapes of all types with oblique teeth have been found to perform better than those without oblique teeth in combination with axial corrugations. The heat transfer and the pressure drop measurements have been taken in separate test sections. Heat transfer tests were carried out in electrically heated stainless steel ducts incorporating uniform wall heat flux boundary conditions. Pressure drop tests were carried out in acrylic ducts. The flow friction and thermal characteristics are governed by duct aspect ratio, corrugation angle, corrugation pitch, twist ratio, space ratio, length, tooth horizontal length and tooth angle of the twisted-tape, Reynolds number and Prandtl number. Correlations developed for friction factor and Nusselt number have predicted the experimental data satisfactorily. The performance of the geometry under investigation has been evaluated. It has been found that on the basis of constant pumping power, up to 55% heat duty increase occurs for the combined axial corrugation and regularly spaced twisted-tape elements inserts with oblique teeth case compared to without oblique teeth twisted-tape inserts cases in the measured experimental parameters space. On the constant heat duty basis, the pumping power has been reduced up to 47% for the combined enhancement geometry than the individual enhancement geometries. However, full-length and short-length twisted-tapes with oblique teeth in combination with axial corrugations show only marginal improvements over the twisted-tapes without oblique teeth.     

Convenient,Mild Catalytic Deprotection of Oximes to Carbonyl Compounds with Hydrogen Peroxide and Iodine Catalyst in Aqueous Acetonitrile

A clean, mild, and efficient catalytic deoximation procedure compatible with several common functional groups has been developed using 30% hydrogen peroxide activated by iodine catalyst in aqueous acetonitrile under essentially neutral conditions. The mechanistic features of an iodonium ion–driven nucleophilic cleavage of oximic C[dbnd]N have been revealed.