Differential protonation and dynamic structure of doxylamine succinate in solution using 1H and 13C NMR

A protonation and dynamic structural study of doxylamine succinate, a 1:1 salt of succinic acid with dimethyl-[2-(1-phenyl-1-pyridin-2-yl-ethoxy)ethyl]amine, in solution using one- and two-dimensional 1H and 13C NMR experiments at variable temperature and concentration is presented. The two acidic protons of the salt doxylamine succinate are in 'intermediate' exchange at room temperature, as evidenced by the appearance of a broad signal. This signal evolves into two distinct signals below about -30 degrees C. A two-dimensional 1H-1H double quantum filtered correlation experiment carried out at -55 degrees C shows protonation of one of the acidic protons to the dimethylamine nitrogen. A two-dimensional rotating frame 1H-1H NOE experiment at the same temperature reveals that the other proton remains with the succinate moiety. Comparison of the 1H and 13C chemical shifts and the 13C T1 relaxation times of the salt with those of the free base further substantiate the findings.     

Bio-detoxification of Phorbol Esters and Other Anti-nutrients of Jatropha curcas Seed Cake by Fungal Cultures Using Solid-State Fermentation

Jatropha seed cake, a byproduct after biodiesel extraction, has several anti-nutrients and toxins. Solid-state fermentation was carried out for the detoxification of the Jatropha seed cake (JSC) using different fungal cultures. The reduction in the anti-nutritional components such as tannins, phytates, saponins, lectin and protease inhibitor, and phorbol esters on 6th, 9th, and 12th day of fermentation was analyzed. The phorbol ester content in the unfermented JSC was 0.83 mg/g, and the maximum degradation of phorbol esters to the extent of 75 % was observed in the case of JSC fermented with Cunninghamella echinulata CJS-90. The phytate degradation in the fermented JSC was in the range of 65–96 %. There was a gradual reduction of saponin content in the JSC from 6th to 12th day, and the reduction of saponin was in the range of 55–99 % after solid-state fermentation. The trypsin inhibitor activity and lectin were 1,680 trypsin inhibitor units (TIU) per gram and 0.32 hemagglutinating unit in the unfermented JSC, respectively. Trypsin inhibitor activity and lectin could not be detected in JSC after 12th day of solid-state fermentation. Tannins accounted for 0.53 % in unfermented JSC, and there was a marginal increase of tannins after solid-state fermentation. The results indicate that biological detoxification could be a promising method to reduce anti-nutritional compounds and toxins in the JSC.     

Computation of stacking and twin faults in varieties of cotton fibers using whole powder pattern fitting technique

The extent of stacking and twin faults has been estimated in different varieties of cotton fibers grown in the Karnataka State of India using wide-angle X-ray scattering (WAXS) data. Further, the microstructural parameters such as crystal size 〈N〉 and lattice strain (g in %) have been determined by a whole powder pattern fitting technique developed by us. In all these cases we note that the stacking and twin faults are quite significant in determining the properties of cotton fibers and their microstructural parameters.     

Molar extinction coefficients of some carbohydrates in aqueous solutions

Molar extinction coefficients of some carbohydrates viz. l-arabinose (C₅H₁₀O₅), d-glucose (C₆H₁₂O₆), d-mannose (C₆H₁₂O₆), d-galactose (C₆H₁₂O₆), d(-) fructose (C₆H₁₂O₆) and maltose (C₁₂H₂₄O₁₂) in aqueous solutions have been determined at 81, 356, 511, 662, 1173 and 1332 keV by gamma ray transmission method in a narrow beam good geometry set-up. These coefficients have been found to depend upon the photon energy following a 4-parameter polynomial. These extinction coefficients for different sugars having the same molecular formula have same values varying within experimental uncertainty. Within concentration ranges studied, Beer-Lambert law is obeyed very well.     

Simple pulse-acquire NMR methods for the quantitative analysis of calcium, magnesium and sodium in human serum

Simple pulse-acquire NMR methods are presented for accurate quantitation of calcium (Ca(2+)), magnesium (Mg(2+)) and sodium (Na(+)) in human serum. Ca(2+) and Mg(2+) can be determined simultaneously by (1)H NMR via their EDTA (ethylenediaminetetraacetic acid) complexes. Spectra are acquired before and after addition of EDTA, and the difference spectrum is used for integration of the signals from the complexes relative to an internal reference. Serum sodium can also be determined through pulse-acquire (23)Na NMR by integration of the free sodium signal relative to a reference signal (Na(+)+EDTA in a coaxial capillary tube). The method shows excellent accuracy and precision for all three metal ions. Slow chemical exchange between complexed and free EDTA at the natural pH of serum does not limit the accuracy of the determination of Ca(2+) and Mg(2+), and the large errors associated with spin-echo spectral editing methods are avoided.     

Quantitation of ranitidine in pharmaceuticals by titrimetry and spectrophotometry using potassium dichromate as the oxidimetric reagent

Four new methods are described for the determination of ranitidine hydrochloride (RNH) in bulk drug and in formulations employing titrimetric and spectrophotometric techniques and using potassium dichromate as the oxidimetric reagent. In titrimetry (method A), RNH is treated with a measured excess of dichromate in acid medium, and the unreacted oxidant is back titrated with iron(II) ammonium sulfate. The three spectrophotometric methods are also based on the oxidation of RNH by a known excess of dichromate under acidic conditions followed by the determination of surplus oxidant by three different reaction schemes. In one procedure (method B), the residual dichromate is treated with diphenylcarbazide and the absorbance measured at 540 nm. Calculated amount of iron(II) is added to residual dichromate and the resulting iron(III) is complexed with thiocyanate and measured at 470 nm (method C). Method D involves reduction of unreacted dichromate by a calculated amount of iron(II) and estimation of residual iron(II) as its orthophenanthroline complex after raising the pH, and measuring the absorbance at 510 nm. In all the methods, the amount of dichromate reacted corresponds to the drug content. The experimental conditions are optimized. The titrimetric procedure is applicable over 5–10 mg range. In spectrophotometric methods, Beer’s law is obeyed in the ranges 5–50, 5–80, and 10–100 µg ml^?1 for method B, method C, and method D, respectively. The methods were validated for accuracy, precision and recovery. The proposed methods were applied to the analysis of RNH in the tablet and the injection forms, and the results were in agreement with those obtained by the reference method.     

Debye-Waller factor of lead nitrate

The X-ray Debye-Waller factors and Debye temperatures of lead nitrate single crystals taken in the powder form have been determined by measuring integrated intensities of selected Bragg reflections at different temperatures. The characteristic specific Debye temperature has been compared with the value obtained from elastic constant data.     

Dichlorocarbene Addition to

In contrast to the terminal phosphinidene complex PhPW(CO)(5) (2), which adds to [5]metacyclophane (1) in a 1,4-fashion, dichlorocarbene preferentially adds in a 1,2-fashion to the formal "anti-Bredt" type double bond of the aromatic ring of 1 to afford the norcaradiene 11b, which immediately rearranges to the bridged cycloheptatriene 12b and further by a [1,5] sigmatropic chlorine migration to the isomeric 13b as the first observable product. More slowly, the latter isomerizes via a dissociative mechanism to give 15b. A computational study supports the notion that the [1,5] chlorine migration in the rearrangement 12b --> 13b, for which an activation barrier of 70.2 kJ mol(-)(1) was calculated, is essentially concerted with minor charge separation. In contrast, the analogous [1,5] chlorine migration in the flat model compound 7,7-dichlorocycloheptatriene (12a) displays features of a dissociative pathway.     

Phase stabilization in cinnarizine complexes using X-ray profile analysis

Characterization of cobalt(II), cadmium(II), copper(II) and tin(II) cinnarizine complexes have been carried out using conductivity, electronic spectra, infrared, nmr, thermogravimetric and X-ray analyses to establish the nature of phase stabilization in these materials. Also, the intrinsic strain components present in these materials during the formation have been computed using wide-angle X-ray scattering analysis. The variation of the crystallite shape ellipsoid in these materials has been discussed on the basis of Hosemann’s paracrystalline model.