Spectrophotometric determination of lead in vegetables with dibromo-p-methyl-carboxysulfonazo

A new highly sensitive and selective chromogenic reagent dibromo-p-methyl-carboxysulfonazo (DBMCSA) was synthesized and studied for the spectrophotometric determination of lead in detail. In 0.25 M phosphoric acid medium, which greatly increases the selectivity, lead reacts with DBMCSA to form a 1:2 blue complex, having a sensitive absorption peak at 648 nm. Under the optimal conditions, Beer's law is obeyed over the range from 0 to 0.8 μg ml⁻¹ Pb(II) and the apparent molar absorptivity is 1.04×10⁵ l mol⁻¹ cm⁻¹. The detection limit and the variation coefficient were found to be 2.14 ng ml⁻¹ and 1.0%, respectively. It is found that, except for Ca(II) and Ba(II), all foreign ions studied do not interfere with determination. The interference caused by Ca(II) and Ba(II) can be easily eliminated by prior extraction with potassium iodide-methylisobutylketone. The method has been applied to the determination of lead in vegetables with satisfactory results.     

Rapid separation of four main taxoids in Taxus species by a combined LLP-SPE-HPLC (PAD) procedure

A method is described for the simultaneous determination of paclitaxel and three related taxoids, 10-deacetylbaccatin III (10-DAB III), baccatin III, and cephalomannine, in the extracts from the needles of three Chinese yew species, Taxus cuspidata, T. chinensis, and T. media. SPE was applied as the sample preparation technique and RP-HPLC with a photodiode array detector (PAD) was used for the analysis of extract samples. The crude extracts were treated with an improved SPE cartridge packed with a combination of 1-vinyl-pyrrolidin-2-one and divinyl-benzene. The eluent was 75% methanol. The following separation was achieved with a gradient program on an HIQ SIL C18W column in a system of ACN/water within 60 min. The samples were detected by PAD at wavelengths of 232.1 nm for 10-DAB III, 229.8 nm for baccatin III and paclitaxel, and 223.9 nm for cephalomannine. The content of 10-DAB III, baccatin III, cephalomannine, and paclitaxel varied from 0.0277 to 0.0875, 0.0254 to 0.0405, 0.0715 to 0.2486, and 0.0996 to 0.1301 mg/g in fresh needles of the above yew species, respectively. The assay achieved good resolution in the separation between the four compounds, and it can be used for quality control or purity determination for those in bulk and pharmceutical dosage forms.     

In-situ control of different oxygen fugacity experimental study on the electrical conductivity of lherzolite at high temperature and high pressure

At pressure 1.0-4.0 GPa and temperature 1073-1423 K and under the control of oxygen fugacity (Mo+MoO₂, Fe+FeO and Ni+NiO), a YJ-3000t multi-anvil solid high-temperature and high-pressure apparatus and Solartron-1260 impedance/Gain-Phase analyzer were employed to analyze the electrical conductivity of lherzolite. The experimental results showed that: (1) within the range of the selected frequencies (10³-10⁶ Hz), either as viewed from the relationship between the real or imaginary part of complex impedance and the frequency, or from the relationship between modulus, phase angle and frequency, it can be seen clearly that the complex impedance has a strong dependence on frequency; (2) with the rise of temperature (T), the electrical conductivity (σ) increased, and Lg σ and 1/T follows the Arrhenius relationship; (3) with the rise of pressure, the electrical conductivity decreased, and activation enthalpy and temperature-independent pre-exponential factor decreased as well. And the activation energy and activation bulk volume of the main charge carrier in the lherzolite have been obtained for the first time, which are 1.68±0.02 eV and 0.04±0.01 cm³/mol, respectively; (4) under the given pressure and temperature, the electrical conductivity tends to increase with increasing oxygen fugacity, and under the given pressure, the activation enthalpy and pre-exponential factor tend to decrease with the rise of oxygen fugacity; (5) at 2.0 GPa and the control of the three solid buffers, Mo+MoO₂, Fe+FeO and Ni+NiO, the exponential factors of electrical conductivity variation range with oxygen fugacity are , and the theoretical model for the relationship between the electrical conductivity of lherzolite and the oxygen fugacity under high pressure has been established for the first time; (6) the electrical conduction mechanism of small polarons provides a reasonable explanation to the variation of conductivity of lherzolite with oxygen fugacity.     

Zirconium–Porphyrin‐Based Metal–Organic Framework Hollow Nanotubes for Immobilization of Noble‐Metal Single Atoms

Single atoms immobilized on metal–organic frameworks (MOFs) with unique nanostructures have drawn tremendous attention in the application of catalysis but remain a great challenge. Various single noble‐metal atoms have now been successfully anchored on the well‐defined anchoring sites of the zirconium porphyrin MOF hollow nanotubes, which are probed by aberration‐corrected scanning transmission electron microscopy and synchrotron‐radiation‐based X‐ray absorption fine‐structure spectroscopy. Owing to the hollow structure and excellent photoelectrochemical performance, the HNTM‐Ir/Pt exhibits outstanding catalytic activity in the visible‐light photocatalytic H₂ evolution via water splitting. The single atom immobilized on MOFs with hollow structures are expected to pave the way to expand the potential applications of MOFs.     

Millimeter-wave quasi-optical power combining techniques

6mm efficient power-combining has been achieved by introducing Gunn diodes directly into quasi-optical resonant cavity. The structure, the principle and the experiments are reported.     

Online separation and preconcentration of trace heavy metals with 2,6-dihydroxyphenyl-diazoaminoazobenzene impregnated amberlite XAD-4

A rapid and sensitive flow injection online preconcentration method was developed for determination of Cd, Co, Cu, and Zn in natural water samples by flame atomic absorption spectrometry. The procedure is based on the retention of analytes in the form of 2,6-dihydroxyphenyl-diazoaminoazobenzene (DHDAA) complexes on a microcolumn packed with XAD-4-DHDAA resin. Cd, Co, Cu, and Zn can be eluted from the microcolumn with 0.5 mol L⁻¹ HCl and pumped directly to the nebulizer-burner system of the flame atomic absorption spectrometer (FAAS). The enrichment factors are 42 (Cd), 33 (Co), 28 (Cu), and 31 (Zn), for a sample volume of 6.0 mL and 1 min preconcentration time relative to direct introduction of aqueous solutions into an atomic absorption spectrometer. The sampling frequency was 30 h⁻¹ with a 1 min loading. The proposed method allowed the determination of Cd, Co, Cu, and Zn with detection limits of 0.1, 0.5, 0.3, and 0.2 μg L⁻¹, respectively. The selectivity of the XAD-4-DHDAA resin for Cd, Co, Cu, and Zn over several electrolytes was also investigated. The method was validated by analysis of a standard reference material (GBW 08301) with the results agreement with those quoted by manufactures. The developed method was applied to the determination of trace Cd, Co, Cu, and Zn in tap water, ground water and river water samples with satisfactory results.     

Determination of Lead Using a New Chromogenic Reagent 2-(2-Sulfo-4-acetylphenylazo)-7-(2,4,6-trichlorophenylazo)-1,8-dihydroxynaphthalene-3,6-disulfonic Acid

A novel chromogenic reagent, 2-(2-sulfo-4-acetylphenylazo)-7-(2,4,6-trichlorophenylazo)-1,8-dihydroxynaphthalene-3,6-disulfonic acid 1, was prepared by diazo coupling of 4-acetylaniline-2-sulfonic acid and 2,4,6-trichloroaniline to chromotropic acid through –N=N– groups. Based on this reagent, a simple, sensitive and selective spectrophotometric method was developed for the determination of lead. In 0.20M phosphoric acid medium, lead reacts with 1 to form a 1:2 blue complex with an absorption maximum of 654nm. Beers law is obeyed in the range of 0–0.6mgL^–1 of lead. The apparent molar absorptivity is 1.25×10⁵Lmol^–1cm^–1. The detection limit and quantification limit were found to be 0.63µgL^–1 and 2.1µgL^–1, respectively. The relative standard deviation for eleven replicate measurements was of 2.6%. The interference of foreign ions was also investigated. All the other foreign ions studied did not interfere with lead determination except for Ca(II) and Ba(II). The interference caused by Ca(II) and Ba(II) can be eliminated by prior extraction of lead with potassium iodide-methylisobutylketone (KI-MIBK). The proposed method was applied to the determination of lead in certified samples with satisfactory results.     

Separation of 7-xylosyl-10-deacetyl paclitaxel and 10-deacetylbaccatin III from the remainder extracts free of paclitaxel using macroporous resins

The separation and enrichment of 10-deacetylbaccatin III (10-DAB III) and 7-xylosyl-10-deacetyl paclitaxel were studied on seven macroporous resins with special structures. The performance of 7-xylosyl-10-deacetyl paclitaxel and 10-DAB III on macroporous resins including AB-8, ADS-17, ADS-21, ADS-31, ADS-8, H1020 and NKA-II was compared according to their adsorption and desorption properties. AB-8 provided a much higher adsorption capacity for 7-xylosyl-10-deacetyl paclitaxel and 10-DAB III than other resins, and its adsorption data fitted well to the Langmuir and Freundlich isotherm. According to the adsorption and desorption capacities and the adsorption isotherms, AB-8 demonstrated a remarkable capability for the preparative separation of 7-xylosyl-10-deacetyl paclitaxel and 10-DAB III from the remainder extracts free of paclitaxel. In order to optimize parameters of separation, dynamic adsorption and desorption experiments were carried out on the columns packed with AB-8 resin. The optimal conditions were: the processing volume 15 BV; concentrations of 7-xylosyl-10-deacetyl paclitaxel and 10-DAB III in feed solution 0.0657 mg/mL and 0.1494 mg/mL; flow rate 1 mL/min; temperature 35 degrees C. The gradient elution program was as follows: 30% ethanol for 3 BV, then 80% of ethanol for 6 BV, flow rate 1 mL/min. After the AB-8 resin treatment, the contents of 7-xylosyl-10-deacetyl paclitaxel and 10-DAB III in the product had increased from 0.053% and 0.2% to 3.34% and 1.69%, which were 62.43-fold and 8.54-fold of those in the untreated extracts, respectively, and the recoveries of 7-xylosyl-10-deacetyl paclitaxel and 10-DAB III were 85.85% and 52.78%. The performance achieved good separation and higher recovery of 7-xylosyl-10-deacetyl paclitaxel and 10-DAB III from remainder extracts free of paclitaxel by using AB-8 resin. It is a fast and effective method for the separation and enrichment of 7-xylosyl-10-deacetyl paclitaxel and 10-DAB III.     

Preparation of cobalt hydroxide film modified electrode and its analytical application

Cobalt hydroxide film modified electrode was prepared by depositing cobalt hydroxide on glassy carbon electrode (GCE) surface in an alkaline aqueous solution and then characterized by cyclic voltammetry. The electrochemical behavior of resorcin on the film modified electrode was investigated. The results show that cobalt hydroxide films in alkaline solutions have good electrocatalytical activity towards the oxidation of resorcin. The recovery of resorcin from sample ranged from 95.2 to 103.4% and the oxidation peak currents were directly proportional to the resorcin concentration from 5.0 × 10⁻⁶ to 1.05 × 10⁻⁴ M with correlation coefficient of 0.9986. A detection limit of 1.0 × 10⁻⁷ M for resorcin was estimated. Various factors affecting the electrocatalytical activity of cobalt hydroxide film were investigated in detail. Real water samples were analyzed and satisfactory results were obtained.