Conversion of ammonia to dinitrogen in wastewater by Nitrosomonas europaea

Because Nitrosomonas europaea contains ammonia-oxidizing enzyme, nitrite reductase, and nitrous oxide reductase, the conversion of ammonia to dinitrogen was tried with different reaction conditions. In aerobic reaction conditions, ammonium was converted to nitrite (NO ₂ ⁻ ), while under oxygen-limiting or oxygen-free conditions, NO ₂ ⁻ -N formed from ammonia oxidation by N. europaea was reduced to N₂O and dinitrogen with 22% conversion. During denitrification, optimal pH for the production of N₂O and dinitrogen was found to be 7.0–8.0. Dinitrogen was not produced in acidic pH<7.0. A low partial oxygen pressure as well as oxygen-free conditions are favorable for high production of dinitrogen.     

Phase Behavior of Diglycerol Monomyristate in Different Nonpolar Organic Solvent Systems

We have investigated the phase behavior of diglycerol monomyristate (DGM) in a variety of organic solvents over a wide range of temperatures and compositions. At lower temperature, there exists a surfactant solid, which solubilize different amounts of oils depending on the oil nature. The melting temperature of the solid phase is virtually constant in a wide range of composition. In all the systems, a lamellar liquid crystal (L_α) is formed in surfactant‐rich regions at intermediate temperatures between the solid‐melt and isotropic two‐ or single‐phase regions. In the dilute regions reverse vesicles are formed in the L_α+O regions mainly in the case of linear hydrocarbon type oils. In the aromatic and cyclic aliphatic oils, there are isotropic solutions at 25°C. However, there is dispersion of α‐solid in the case of liner hydrocarbon oils. Two liquid‐phase regions above the L_α phase are observed in the case of tetradecane and hexadecane. In the shorter chain oil systems, such as octane and decane, no two liquid‐phase appear above L_α region. That is the two liquid‐phase region is largely dependent on the chain length of the oils, and becomes wider in longer hydrocarbon oil.     

Cerium oxide-catalyzed multicomponent condensation approach to spirooxindoles in water

An efficient and facile green synthesis of spirooxindole derivatives bearing pyrano[2,3-c]pyrazole moiety has been achieved via a \(\mathrm{CeO}_{2}\)-NPs catalyzed four-component reaction in water. The protocol offers an environmentally benign and effective approach to highly functionalized and biologically interesting spiro[indoline-3,4\(^\prime \)-pyrano[2,3-c]pyrazole] derivatives. The synthesized compounds exhibit potent antioxidant and antibacterial activities.     

Simulation of winter air pollution dispersion mechanism of Kathmandu valley by water-tank experiment

The air pollution concentration in Kathmandu valley in the winter season was found to be higher than in the summer season due to the formation of the inversion layer. This mechanism was simulated in the water-tank experiment by measuring the temperature and flow field using liquid crystal thermometry and particle image velocimetry. Thermal stratification was made at the beginning of the experiment and the surface temperature of the valley model was changed with 12 minutes period matching the diurnal field temperature pattern of the Kathmandu valley. The updraft wind and Bernard convection occurred during daytime and downdraft wind and inversion layer were realized during nighttime. The temperature, flow field and mass dispersion characteristics obtained in the water-tank experiment explained clearly the mechanism of air pollution in Kathmandu valley.     

Erratum to: Solution behavior of aqueous mixtures of low and high molecular weight hydrophobic amphiphiles

Mixtures of a hydrophobic triblock copolymer (L121, PEO₅PPO₆₈PEO₅) and a hydrophobic anionic surfactant (AOT, Sodium bis(2-ethylhexyl)sulfosuccinate), each alone forming turbid vesicular solutions in water, aggregate to produce a thermodynamically stable, transparent and isotropic solution. Mixed AOT/L121 aggregates could be confirmed by fluorescence, surface tension, differential scanning calorimetry (DSC) and isothermal titration calorimetry (ITC). In an isotropic region, where mixed aggregates are formed, there is a synergistic interaction between monomers of AOT and L121 in the mixture. In addition, Small Angle Neutron Scattering (SANS) experiments provided evidence that mixed aggregates have the shape of either spheres (with a certain polydispersity) or very short ellipsoids (axial ratio below 2), confirming a transition from giant multilamellar vesicles to small aggregates upon mixing the two hydrophobic amphiphiles. Upon dilution, the morphology changes to disk-like. From an examination of the results of all the methods the peculiar behavior of the mixed AOT/L121 system is explained.     

Implantation of the 111In/Cd Probe as InO− Ion for Radioisotope Tracer Studies

A radioisotope ion implanter has been developed using a cesium-sputtering, negative ion source, which offers versatility and sustained operation. Employing the molecular ¹¹¹In¹⁶O⁻ ion, μCi activities of the radioisotope probe ¹¹¹In/Cd have been implanted into different material hosts. The implanted tracer activity has been shown to be sufficient for LTNO, NMRON and PAC. A new NMRON resonance for ¹¹¹InAg was observed at 75.08 MHz. In₂O₃ powder performed well as the radioisotope carrier in the ion source, with the ratio of radioisotope and parasitic ion current being typically 4 × 10⁻⁴.     

Interfacial Engineering of CdO–CdSe 3D Microarchitectures with in situ Photopolymerized PEDOT for an Enhanced Photovoltaic Performance

In the present work, porous 3D CdO‐microstructured electrode obtained by pyrolysis of 3D CdCO₃ microstructures is self‐sensitized with CdSe using an ion exchange reaction. After sensitization, an interfacial treatment of the CdO–CdSe interface is performed by depositing a thin film of PEDOT using a photoinduce polymerization route. The microstructured electrode before and after interfacial treatment is characterized using field‐emission scanning microscope, energy dispersive X‐ray analyzer, contact angle measurement, UV–Visible absorption spectrophotometer and X‐ray photoelectron spectrometer. After constructing a liquid junction solar cell with a Pt counter electrode, the photovoltaic performance and interfacial charge transfer kinetics across the CdO–CdSe interface before and after PEDOT treatment are investigated. The results exhibit an improved interfacial charge‐transfer resistance after the PEDOT treatment, which leads to enhance the short‐circuit current by 15.81% and the power conversion efficiency by 19.82%.