A review of bioanalytical methods for chronic lymphocytic leukemia drugs and metabolites in biological matrices

Quantitation of drugs used for the treatment of chronic lymphocytic leukemia in various biological matrices during both pre-clinical and clinical developments is very important, often in routine therapeutic drug monitoring. The first developed methods for quantitation were traditionally done on LC in combination with either UV or fluorescence detection. However, the emergence of LC with mass spectrometry in tandem in early 1990s has revolutionized the quantitation as it has provided better sensitivity and selectivity within a shorter run time; therefore it has become the choice of method for the analysis of various drugs. In this article, an overview of various bioanalytical methods (HPLC or LC–MS/MS) for the quantification of drugs for the treatment of chronic lymphocytic leukemia, along with applicability of these methods, is given.     

Sodiation Of Hard Carbon: How Separating Enthalpy And Entropy Contributions Can Find Transitions Hidden In The Voltage Profile

Sodium-ion batteries (NIBs) utilize cheaper materials than lithium-ion batteries (LIBs) and can thus be used in larger scale applications. The preferred anode material is hard carbon, because sodium cannot be inserted into graphite. We apply experimental entropy profiling (EP), where the cell temperature is changed under open circuit conditions. EP has been used to characterize LIBs; here, we demonstrate the first application of EP to any NIB material. The voltage versus sodiation fraction curves (voltage profiles) of hard carbon lack clear features, consisting only of a slope and a plateau, making it difficult to clarify the structural features of hard carbon that could optimize cell performance. We find additional features through EP that are masked in the voltage profiles. We fit lattice gas models of hard carbon sodiation to experimental EP and system enthalpy, obtaining: 1. a theoretical maximum capacity, 2. interlayer versus pore filled sodium with state of charge.     

Development of Polar Organic Mode Chromatographic Method by Polysaccharide-Based Immobilized Chiral Selector and Validation for the Determination of the Enantiopurity of Novel Mineralocorticoid Receptor Antagonist Atropisomer–Esaxerenone

Esaxerenone is a new nonsteroidal mineralocorticoid receptor antagonist utilized to treat high blood pressure. Chemically, esaxerenone is a pyrrole derivative consisting of hindered rotation, which results in stereoisomers named atropisomers. Currently, no methods exist for the separation and quantification of these atropisomers. A new and accurate chiral liquid chromatographic technique was developed and validated to estimate the enantiomeric purity of esaxerenone. Polar organic chiral separation was carried out on an immobilized amylose-based chiral stationary phase (Chiralpak IG) with methanol:acetonitrile:diethylamine (9:1:0.1, v/v/v) mixture as a mobile phase. The total runtime was 15 min, and the resolution (R_s) between the atropisomers was more than 3.0. The detection and quantification thresholds for the R-atropisomer were found to be 0.03 and 0.1 µg mL^?1, respectively, for a test concentration of esaxerenone (1000 µg mL^?1). Over the range from the limit of quantification to 0.3 percent, the method's linearity for the R-atropisomer was excellent (R²?>?0.999). The R-atropisomer recovery varied from 95 to 102%, confirming the method’s good accuracy. For a 48-h research period, the chemical was shown to be stable.

     

Preliminary Study of Cationic Copolymerization of α-Methylstyrene and Isobutyl Vinyl Ether. II

α-Methylstyrene (α-MS) and isobutyl vinyl ether (IBVE) were copolymerized by using the H₂O/EtAlCl₂ initiator system and CH₂Cl₂ and CH₃Cl solvent in the temperature range from -30 to -90°C. As compared to homopolymerization of α-MS, both yields and molecular weights are reduced upon addition of small amounts of IBVE to the feed. The reactivity ratios were calculated by the method of Kelen and Tödös as well as the Fineman and Ross method, and the combined effect of change of solvent and temperature on reactivity ratios was determined. Effects of feed composition and temperature on the copolymer yield, composition, and number-average molecular weight M _n were studied in detail. M _n showed a novel exponential dependence on the IBVE concentration in the feed. The overall activation energies of molecular weight were determined from the Arrhenius plots for both homo-and copolymerization systems. Based on these and the yield data, a speculation is made regarding reaction mechanism for molecular weight control. NMR and DTA data are reported, which establish the random nature of the copolymers.     

Molecular Modeling and 3D-QSAR Studies in 2-Aziridinyl-and 2,3-Bis(Aziridinyl)-1,4-Naphthoquinonyl Sulfonate and Acylate Derivatives as Potential Antimalarial Agents

Abstract

Malaria is still continuing to be one of the most dreadful diseases of the tropical countries particularly due to the development of resistance to the existing antimalarials. From observed, antimalarial activity of 2-aziridinyl- and 2,3-bis(aziridinyl)-1,4-naphthoquinonyl sulfonate and acylate derivatives acting through redox cycling mechanism, molecular modeling and three dimensional-quantitative structure activity relationship (3D-QSAR) studies have been carried out on a set of 63 compounds to identify important pharmacophors. Among several 3D-QSAR models generated, three models with correlation coefficient r > 0.82, match > 0.60 and chance = 0.00 have shown two common biophoric sites: one being the oxygen atom at position 1 of the naphthoquinone ring in terms of π-population, charge and electron donating ability while the second being the center of the phenyl ring in terms of its 6π-electrons. In addition to these sites, the models also share two common secondary sites: one positively contributing H-acceptor site while the second site contributing negatively in terms of steric refractivity. All these models showed good agreement between the experimental, calculated and predicted antimalarial activities.     

A Convenient Synthesis of Naturally Occuring Xanthones

Six naturally occuring xanthones are synthesized by the thermal condensation of methyl 2,6-dihydroxybenzoate, methyl 2,4-dihydroxybenzoate and methyl 2,4,6-trihydroxybenzoate with hydroquinone, catechol and pyrogallol.     

Validated LC–MS/MS method for quantitation of a selective JAK1 inhibitor,filgotinib in rat plasma,and its application to a pharmacokinetic study in rats

Filgotinib is a selective JAK1 (Janus kinase) inhibitor, filed in Japan for the treatment of rheumatoid arthritis. In this paper, we report a validated liquid chromatography coupled with tandem mass spectrometry for the quantification of filgotinib in rat plasma using tofacitinib as an internal standard (IS) as per the Food and Drug Administration regulatory guidelines. Filgotinib and the IS were extracted from rat plasma using ethyl acetate as an extraction solvent and chromatographed using an isocratic mobile phase (0.2% formic acid:acetonitrile; 20:80, v/v) at a flow rate of 0.9 mL/min on a Gemini C₁₈ column. Filgotinib and the IS were eluted at ~1.31 and 0.89 min, respectively. The MS/MS ion transitions monitored were m/z 426.3 → 291.3 and m/z 313.2 → 149.2 for filgotinib and the IS, respectively. The calibration range was 0.78–1924 ng/mL. No matrix effect and carryover were observed. Intra- and inter-day accuracies and precisions were within the acceptance range. Filgotinib was stable for three freeze–thaw cycles: on bench-top up to 6 h, in an autosampler up to 21 h, and at −80 ° C for 1 month. This novel method has been applied to a pharmacokinetic study in rats.     

Simultaneous determination of colchicine and febuxostat in rat plasma: Application in a rat pharmacokinetic study

A selective, sensitive and rapid LC–MS/MS method has been developed and validated as per US Food and Drug Administration regulatory guidelines for the simultaneous quantitation of colchicine and febuxostat in rat plasma. Colchicine and febuxostat were extracted from the rat plasma using 10% tert-butyl methyl ether in ethyl acetate using colchicine-d₆ as an internal standard (IS). The chromatographic separation of colchicine, febuxostat and the IS was achieved using a mobile phase comprising 5 mm ammonium formate and 0.025% formic acid in acetonitrile (20:80, v/v) in isocratic mode on an Eclipse XDB-C₁₈ column. The injection volume and flow rate were 5.0 μl and 0.9 ml/min, respectively. Colchicine and febuxostat were detected by positive electrospray ionization in multiple reaction monitoring mode using transition pairs (Q1 → Q3) of m/z 400.10 → 358.10 and 317.05 → 261.00, respectively. The assay was linear in the ranges of 0.25–254 and 2.60–622 ng/ml for colchicine and febuxostat, respectively. The inter- and intra-day precision values were 0.58–13.0 and 1.03–4.88% for colchicine and febuxostat, respectively. No matrix or carryover effects were observed during the validation. Both analytes were stable on the bench-top, in the autosampler and in storage (freeze–thaw cycles and long-term storage at −80 ° C). A pharmacokinetic study in rats was performed to show the applicability of the validated method.     

Application of Linear Viscoelastic Continuum Damage Theory to the Low and High Strain Rate Response of Thermoplastic Polyurethane

Experimental Mechanics - Understanding the mechanical response of elastomers to applied deformation at different strain rates and temperatures is crucial in industrial design and manufacture;...