Synthesis of end‐functionalized polyethers by phosphazene base‐catalyzed ring‐opening polymerization of 1,2‐butylene oxide and glycidyl ether

For the living ring‐opening polymerization (ROP) of epoxy monomers, the catalytic activity of organic superbases, tert‐butylimino‐tris(dimethylamino)phosphorane, 1‐tert‐butyl‐2,2,4,4,4‐pentakis(dimethylamino)‐2Λ⁵,4Λ⁵‐catenadi(phosphazene), 2,8,9‐triisobutyl‐2,5,8,9‐tetraaza‐1‐phosphabicyclo[3.3.3]undecane, and 1‐tert‐butyl‐4,4,4‐tris(dimethylamino)‐2,2‐bis[tris(dimethylamino)phosphoranylidenamino]‐2Λ⁵,4Λ⁵‐catenadi(phosphazene) (t‐Bu‐P₄), was confirmed. Among these superbases, only t‐Bu‐P₄ showed catalytic activity for the ROP of 1,2‐butylene oxide (BO) to afford poly(1,2‐butylene oxide) (PBO) with predicted molecular weight and narrow molecular weight distribution. The results of the kinetic, post‐polymerization experiments, and MALDI‐TOF MS measurement revealed that the t‐Bu‐P₄‐catalyzed ROP of BO proceeded in a living manner in which the alcohol acted as the initiator. This alcohol/t‐Bu‐P₄ system was applicable to the glycidol derivatives, such as benzyl glycidyl ether (BnGE) and t‐butyl glycidyl ether, to afford well‐defined protected polyglycidols. The α‐functionalized polyethers could be obtained using different functionalized initiators, such as 4‐vinylbenzyl alcohol, 5‐hexen‐1‐ol, and 6‐azide‐1‐hexanol. In addition, the well‐defined cyclic‐PBO and PBnGE were successfully synthesized using the combination of t‐Bu‐P₄‐catalyzed ROP and click cyclization. © 2012 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2012     

International journal of computational fluid dynamics real-time prediction of unsteady flow based on POD reduced-order model and particle filter

An integrated method consisting of a proper orthogonal decomposition (POD)-based reduced-order model (ROM) and a particle filter (PF) is proposed for real-time prediction of an unsteady flow field. The proposed method is validated using identical twin experiments of an unsteady flow field around a circular cylinder for Reynolds numbers of 100 and 1000. In this study, a PF is employed (ROM-PF) to modify the temporal coefficient of the ROM based on observation data because the prediction capability of the ROM alone is limited due to the stability issue. The proposed method reproduces the unsteady flow field several orders faster than a reference numerical simulation based on Navier–Stokes equations. Furthermore, the effects of parameters, related to observation and simulation, on the prediction accuracy are studied. Most of the energy modes of the unsteady flow field are captured, and it is possible to stably predict the long-term evolution with ROM-PF.     

Changes in Hip and Knee Muscle Strength in Patients Following Total Hip Arthroplasty

Objective: To investigate changes in hip and knee muscle strength in patients before and after total hip arthroplasty (THA) in comparison with that in healthy adults. Methods: The study included 21 women who underwent unilateral THA (THA group) and 21 age-matched healthy women (healthy group). Maximal isometric strengths of hip flexors, extensors, and abductors, and knee extensors and flexors were measured before surgery and at 4 weeks and 6 months after surgery. Results: Before surgery, muscle strength on both sides, except for hip flexors on the uninvolved side, was significantly lower in the THA group than the corresponding muscle strength in the healthy group. Up to 6 months after THA, strength of all muscle groups on both sides was significantly improved compared with their preoperative status, although the knee extensor strength on the involved side temporarily worsened at 4 weeks. However, the strength of hip extensors and knee extensors on the involved side, and hip abductors on both sides in the THA group remained below that in the healthy group. Conclusions: Our results suggest that rehabilitation specialists should consider increasing the focus on the uninvolved side and encourage patients to continue strength training beyond 6 months after surgery.     

Copolymerization of ethylene and norbornene using cyclopentadienylzirconium trichloride activated by isobutyl‐modified methylaluminoxane

The copolymerization of ethylene (E) and norbornene (NB) was investigated using the commercially available and inexpensive catalyst system, cyclopentadienylzirconium trichloride (CpZrCl₃)/isobutyl‐modified methylaluminoxane (MMAO), at a moderate polymerization temperature in toluene. For the CpZrCl₃ catalyst system activated by aluminoxane with a 40 mol % methyl group and a 60 mol % isobutyl group (MMAO), the quantities of the charged NB and the polymerization temperature significantly affected the molecular weights, polydispersities, and NB contents of the obtained copolymers and the copolymerization activities in all the experiments. As the charged NB increased and thereby the NB/E molar ratio increased, the NB content in the copolymer increased and reached a maximum value of 71 mol %. The CpZrCl₃/MMAO ([Al]/[Zr] = 1000) catalyst system with the [NB] of 2.77 mol L^?1 and ethylene of 0.70 MPa at 50 °C showed the highest activity of 1690 kg mol_Zr^?1 h^?1 and molecular weight of 21,100 g mol^?1. The ¹³C NMR analysis showed that the CpZrCl₃/MMAO catalyst system produced the E‐NB random copolymer with a number of NB homosequences such as the NN dyad and NNN triad. © 2008 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 46: 7411–7418, 2008     

Chemical release control: Sulfonate esters from perfume and herbicide alcohols and p-styrenesulfonyl chloride

p-Styrenesulfonate esters of primary and secondary perfume alcohols and phenols, including citronellol, 1-menthol, borneol, β-phenethyl alcohol, eugenol, p-anisyl alcohol, cinnamyl alcohol, and geraniol, and herbicide alcohols such as 2,4-dichloro- and 2,4,5-trichlorophenoxy-ethanols were synthesized using p-styrenesulfonyl chloride in the presence of bases such as pyridine, triethylamine, sodium hydrogen carbonate, and sodium hydride. The hydrolytic behavior of sulfonate ester monomers and their copolymers with N-vinyl-2-pyrrolidone to liberate perfume and herbicide alcohols was structure-dependent, thereby affording chemical release control.     

Carboxylic acid clathrate hosts of Diels-Alder adducts of phencyclone and 2-alkenoic acids. Role of bidentate C-H ... O hydrogen bonds between the phenanthrene and carbonyl groups in host-host networks

Carboxylic acid host compounds (3) having a phenanthrene-condensed bicyclo[2.2.1]hept-2-en-7-one skeleton have been synthesized by the [4 + 2]pi cycloaddition of phencyclone (1a) with 2-alkenoic acids (2) and their inclusion behavior was investigated. The endo [4 + 2]pi cycloadducts (3) enclathrated alcohols and ethers besides aromatics and ketones. The X-ray crystallographic analysis of the inclusion compound (3ac-dioxane) of the endo [4 + 2]pi cycloadduct (3ac) of phencyclone and trans 2-butenoic acid (2c) indicated that dioxanes are located at the opposite side of the bridged carbonyl of the bicyclo[2.2.1]hept-2-en-7-one moiety, in which the O-H...O and C-H...O hydrogen bonds play an important role in the inclusion complex formation. Similarly, a pair of 3-pentanone molecules were included in the endo [4 + 2] pi cycloadduct (3ae) of 1a and cinnamic acid (2e). In both cases, the hosts are linked by the edge-to-face interaction between the phenanthrene and phenyl rings and the "bidentate" C-H...O hydrogen bonds between the phenanthrene-ring hydrogens and the bridged carbonyl or the carboxylic carbonyl group. The endo [4 + 2] pi cycloadduct (3bl) of tetracyclone (1b) and acrylamide (2l) also showed a wide-range inclusion behavior, in which alcohols are included by making a hydrogen-bond loop with the amide groups. The inclusion behavior of the carboxylic acid Diels-Alder hosts is discussed on the basis of the single crystal X-ray analysis, thermal analysis and semiempirical molecular orbital calculation data.     

Synthesis of novel hyperbranched polymer through cationic ring‐opening multibranching polymerization of 2‐hydroxymethyloxetane

The cationic ring‐opening multibranching polymerization of 2‐hydroxymethyloxetane ( 1 ) as a novel latent AB₂‐type monomer was carried out using trifluoromethane sulfonic acid or trifluoroboron diethyl etherate by a slow‐monomer‐addition (SMA) method. The polymer yield of poly‐1 ranged from ca. 58–88%, which increase with the increasing monomer addition time on the SMA method. The absolute molecular weights (M_w,MALLS) and the polydispersities of poly‐1 were in the range of 8,000–43,500 and 1.45–4.53, respectively, which also increased with the increasing monomer addition time. The Mark‐Houwink‐Sakurada exponents α in 0.2 M NaNO₃ aq. were determined to be 0.02–0.25 for poly‐1 , indicating that poly‐1 has compact forms in the solution because of the highly branched structure. The degree of the branching value of poly‐1 , which was calculated by Frey's equation, ranged from ca. 0.50 to 0.58, which increased with the increasing monomer addition time. The steady shear flow of poly‐1 in aqueous solution exhibited a Newtonian behavior with steady shear viscosities independent of the shear rate. The results of the MALLS, NMR, and viscosity measurements indicated that poly‐1 is composed of a highly branched structure, i.e., the hyperbranched poly (2‐hydroxymethyloxetane). © 2011 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2011     

Development of rapid and simultaneous quantitative method for green tea catechins on the bioanalytical study using UPLC/ESI‐MS

A rapid and quantitative analytical method for the simultaneous determination of green tea catechins using ultra‐performance liquid chromatography/electrospray ionization–mass spectrometry was developed. Total analytical run time was 3.5 min for the detection of (?)‐epicatechin (EC), (?)‐epicatechin‐3‐O‐gallate (ECG), (?)‐epigallocatechin (EGC), (?)‐epigallocatechin‐3‐O‐gallate (EGCG) and myricetin as the internal standard (IS) in rat plasma. The calibration curves were linear over the range of 10–5000 ng/mL for all the catechins. The inter‐ and intra‐day precision (relative standard deviation) and accuracy (percentage deviation) of the method were both lower than 10%. The average extraction recoveries in plasma ranged from 68.5 to 86.5%, and the lower limits of quantification of EC, EGC, ECG and EGCG were 10 ng/mL with a signal‐to‐noise ratio of >10. The assay developed was successfully applied to a pharmacokinetic study of catechins following intravenous and intragastric administrations of green tea extract in rats. Plasma concentrations of four catechins were detected up to 5–24 h after administration, and the pharmacokinetic parameters of catechins were in agreement with previous studies. From these findings, taken together with the high productivity and precision, the developed method could be a reliable and reproducible tool for the evaluation of pharmacokinetic properties of catechins. Copyright © 2012 John Wiley & Sons, Ltd.     

Adaptive mesh refinement and load balancing based on multi-level block-structured Cartesian mesh

We developed a framework for a distributed-memory parallel computer that enables dynamic data management for adaptive mesh refinement and load balancing. We employed simple data structure of the building cube method (BCM) where a computational domain is divided into multi-level cubic domains and each cube has the same number of grid points inside, realising a multi-level block-structured Cartesian mesh. Solution adaptive mesh refinement, which works efficiently with the help of the dynamic load balancing, was implemented by dividing cubes based on mesh refinement criteria. The framework was investigated with the Laplace equation in terms of adaptive mesh refinement, load balancing and the parallel efficiency. It was then applied to the incompressible Navier–Stokes equations to simulate a turbulent flow around a sphere. We considered wall-adaptive cube refinement where a non-dimensional wall distance y⁺ near the sphere is used for a criterion of mesh refinement. The result showed the load imbalance due to y⁺ adaptive mesh refinement was corrected by the present approach. To utilise the BCM framework more effectively, we also tested a cube-wise algorithm switching where an explicit and implicit time integration schemes are switched depending on the local Courant-Friedrichs-Lewy (CFL) condition in each cube.     

Vinyl addition polymerization of norbornene using cyclopentadienylzirconium trichloride activated by isobutyl‐modified methylaluminoxane

Norbornene polymerization using the commercially available and inexpensive catalyst system, cyclopentadienylzirconium trichloride (CpZrCl₃) and isobutyl‐modified methylaluminoxane (MMAO), were carried out over a wide range of polymerization temperatures and monomer concentrations. For the CpZrCl₃ catalyst system activated by aluminoxane with a 40 mol % methyl group and a 60 mol % isobutyl group (MMAO_40/60), the polymerization temperature and monomer concentration significantly affected the molecular weight (M_n) of the obtained polymer and the catalytic activity. With an increase in the polymerization temperature from 0 to 27 °C, the catalytic activity and M_n increased, but these values dramatically decreased with the increasing polymerization temperature from 27 to 70 °C, meaning that the most suitable temperature was 27 °C. The CpZrCl₃/MMAO_40/60 ([Al]/[Zr] = 1000) catalyst system with the [NB] of 2.76 mol L^?1 at 27 °C showed the highest activity of 145 kg mol_Zr^?1 h^?1 and molecular weight of 211,000 g mol^?1. The polymerization using the CpZrCl₃/MMAO_40/60 catalyst system proceeds through the vinyl addition mechanism to produce atactic polynorbornene, which was soluble in chloroform, toluene, and 1,2‐dichlorobenzene, but insoluble in methanol. © 2008 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 46: 1185–1191, 2008