Particle size analysis by sedimentation field flow fractionation. Performance and application

Recently commercial equipment using sedimentation field flow fractionation (SFFF) has become available for analysis of particulate materials in the sub-micron range. This paper describes the DuPont instrument and discusses its performance. A particular study is described on the comparison of the SFFF technique with that of quasi-elastic light scattering (QELS). The paper concludes that the instrument is capable of measuring particle size distributions with high resolution and precision, provided that no particles above the upper size limit — about 1 μm — are present.     

On the Decay of Turbulence in the 20-Liter Explosion Sphere

The transient flow field in the standard 20-liter explosion sphere was investigated by means of laser Doppler anemometry. Velocities were measured at various locations within the flow field, and this information was used to quantify the transient behavior of the root-mean-square of the velocity fluctuations and to investigate the spatial homogeneity and the directional isotropy of the turbulence. The investigation involved the transient flow fields generated by the three most widely used dust dispersion systems, namely, the Perforated Dispersion Ring, the Rebound Nozzle, and the Dahoe Nozzle. With all three dispersion dust devices, the decay of turbulence could be correlated by a decay law of the form

Standardization of Nanoparticle Measurements

Journal of Nanoparticle Research -     

Stress Inhomogeneity in Powder Specimens Tested in the Jenike Shear Cell: Myth or Fact?

In the mechanical characterization of powders using the direct shear testers such as the Jenike shear cell, the existence of a uniform or well‐defined stress field in a powder specimen is assumed. This assumption has not been subjected to any serious scrutiny in the literature. In this study, the normal stress variation in a silica powder was locally determined by locating a pressure‐sensitive TekScan pad at the bottom section of a Jenike shear cell. A computer simulation of the consolidation and pre‐shearing stages of the Jenike test procedure was performed using the Discrete Element Method (DEM). The paper presents both experimental and computational evidence for the existence of a complex stress field in the powder specimen, thus clearly invalidating the long‐standing stress homogeneity assumption in the direct shear testing of powders. The implications of the stress inhomogeneity in terms of the accuracy of the material properties extracted from the Jenike test are also presented.     

Analysis of Single Particle Attrition during Impact Experiments†

Particle breakage can be characterised as attrition, chipping, fracture, abrasion and wear. All these types of breakage mechanisms are the effect of the damage caused to these particles. These mechanisms can be differentiated not just on the basis of magnitude and direction of the force but also by the damage caused to the particles. The damage is measured by change in the size distribution and the change in shape of the particles. In the current research, experiments were performed on the newly developed Repeated Impact Test. The unique feature of this test is that about hundred particles can be subjected simultaneously to a monitored number of impacts, without particle‐particle interactions at regulated velocities. The preliminary experiments were performed with single crystalline particles of different shapes and sizes. After fixed number of impacts, the images of the particles were taken. The volume and shape of the particles were determined by image analysis. It was observed that the rate of attrition was very high when the particles are irregular. The rate decreased as the particles became more spherical.     

Identification of individual acids in a commercial sample of naphthenic acids from petroleum by two-dimensional comprehensive gas chromatography/mass spectrometry

The identification of most individual members of the complex mixtures of carboxylic acids found in petroleum ('naphthenic acids') has eluded chemists for over a century; they remain unresolved by conventional gas chromatographic methods. Recently, however, we successfully used two-dimensional comprehensive gas chromatography/mass spectrometry to identify numerous individual diamondoid acids in the naphthenic acids of oil sands process water (OSPW). We have now applied the same methods to a study of a mixture of commercially available naphthenic acids originally refined from petroleum. The results confirm that OSPW and refined petroleum contain very different distributions of acids, as noted previously, although some of the diamondoid acids recently identified in OSPW were detectable in both. Rather, two-dimensional comprehensive gas chromatography/time-of-flight mass spectrometry (GCxGC/ToF-MS) of the methyl esters of the petroleum acids and of numerous acids synthesised for comparison showed that the former comprised mainly C(8-18) straight-chain, methyl-branched, acyclic isoprenoid, cyclohexyl and isomeric octahydropentalene, perhydroindane and perhydronaphthalene (decalin) acids. Some of the latter bicyclic acids occurred as both the non-alkyl-substituted isomers and the bicyclic ethanoic and propanoic acids. Also present in minor quantities was a range of phenyl carboxylic and substituted phenyl alkanoic acids, and traces of non-acids, including trimethylnaphthalenes, again identified by comparison with the synthesised compounds. These results represent some of the first identifications of multiple individual naphthenic acids in commercial mixtures originating from petroleum and provide a basis for future studies of the petroleum geochemistry, toxicities and environmental impacts of the acids. Furthermore, characterisation of the acids will be important for improving the understanding of the role of naphthenic acids in petroleum engineering, particularly for oil pipeline deposition problems.     

Interstrain Variability of Human Vaginal Lactobacillus crispatus for Metabolism of Biogenic Amines and Antimicrobial Activity against Urogenital Pathogens

Lactobacillus crispatus is the dominant species in the vagina of many women. With the potential for strains of this species to be used as a probiotic to help prevent and treat dysbiosis, we investigated isolates from vaginal swabs with Lactobacillus-dominated and a dysbiotic microbiota. A comparative genome analysis led to the identification of metabolic pathways for synthesis and degradation of three major biogenic amines in most strains. However, targeted metabolomic analysis of the production and degradation of biogenic amines showed that certain strains have either the ability to produce or to degrade these compounds. Notably, six strains produced cadaverine, one produced putrescine, and two produced tyramine. These biogenic amines are known to raise vaginal pH, cause malodour, and make the environment more favourable to vaginal pathogens. In vitro experiments confirmed that strains isolated from women with a dysbiotic vaginal microbiota have higher antimicrobial effects against the common urogenital pathogens Escherichia coli and Enterococcus faecium. The results indicate that not all L. crispatus vaginal strains appear suitable for probiotic application and the basis for selection should not be only the overall composition of the vaginal microbiota of the host from which they came, but specific biochemical and genetic traits.     

Synchrotron X‐ray CT characterization of titanium parts fabricated by additive manufacturing. Part I. Morphology

Synchrotron X‐ray tomography has been applied to the study of titanium parts fabricated by additive manufacturing (AM). The AM method employed here was the Arcam EBM^® (electron beam melting) process which uses powdered titanium alloy, Ti64 (Ti alloy with approximately 6%Al and 4%V), as the feed and an electron beam for the sintering/welding. The experiment was conducted on the Imaging and Medical Beamline of the Australian Synchrotron. Samples were chosen to examine the effect of build direction and complexity of design on the surface morphology and final dimensions of the piece.     

Influence of solvents and novel extraction methods on bioactive compounds and antioxidant capacity of <Emphasis Type="Italic">Phyllanthus amarus</Emphasis>

Phyllanthus amarus (P. amarus) is a herbal plant used in the treatment of various diseases such as hepatitis, diabetes, and cancer. Efficiency of its bioactive compounds extraction and therefore the biological activity of the extracts are significantly influenced by both solvent character and extraction method. This study is aimed at the determination of the influence of six various solvents (water, acetonitrile, ethanol, methanol, ethyl acetate, and dichloromethane) and nine different extraction methods (conventional, ultrasound-assisted, microwave-assisted, and six novel methods) on the extraction efficiency and antioxidant capacity of P. amarus. The results indicated that water extracted the maximal amount of phenolics from P. amarus and had the highest antioxidant capacity, while microwave-assisted extraction provided the highest yields of phenolics and saponins, and the highest antioxidant capacity with the lowest energy consumption when compared to the other extraction methods. These findings implied that water and microwave-assisted extraction are recommended as the most effective solvent and method for the extraction of bioactive compounds from P. amarus for potential application in the pharmaceutical and nutraceutical industries.