Flame Temperature Effect on the Structure of SiC Nanoparticles Grown by Laser Pyrolysis

Small SiC nanoparticles (10 nm diameter) have been grown in a flow reactor by CO₂ laser pyrolysis from a C₂H₂ and SiH₄ mixture. The laser radiation is strongly absorbed by SiH₄ vibration. The energy is transferred to the reactive medium and leads to the dissociation of molecules and the subsequent growth of the nanoparticles. The reaction happens with a flame. The purpose of the experiments reported in this paper is to limit the size of the growing particles to the nanometric scale for which specific properties are expected to appear. Therefore the effects of experimental parameters on the structure and chemical composition of nanoparticles have been investigated. For a given reactive mixture and gas velocity, the flame temperature is governed by the laser power. In this study, the temperature was varied from 875°C to 1100°C. The chemical analysis of the products indicate that their composition is a function of the temperature. For the same C/Si atomic ratio in the gaseous phase, the C/Si ratio in the powder increases from 0.7 at 875°C up to 1.02 at 1100°C, indicating a growth mechanism limited by C₂H₂ dissociation. As expected, X-ray diffraction has shown an improved crystallisation with increasing temperature. Transmission electron microscopy observations have revealed the formation of 10 nm grains for all values of laser power (or flame temperature). These grains appear amorphous at low temperature, whereas they contain an increasing number of nanocrystals (2 nm diameter) when the temperature increases. These results pave the way to a better control of the structure and chemical composition of laser synthesised SiC nanoparticles in the 10 nm range.     

Adaptive control and synchronization of a coupled dynamo system with uncertain parameters

This paper treats the adaptive control and synchronization of the coupled dynamo system with unknown parameters. Based on the Lyapunov stability technique, an adaptive control laws are derived such that the coupled dynamo system is asymptotically stable and the two identical dynamo systems are asymptotically synchronized. Also the update rules of the unknown parameters are derived. Finally, numerical simulation of the controlled and synchronized systems are presented.     

Estimation of the ionization pK(a) of pharmaceutical substances using the computer program Sparc

The computer program sparc was used to calculate the pK(a) values of some important pharmaceutical substances. The sparc models proved to be suitable for estimating the pK(a) values of beta-adrenergic blocking agents and benzodiazepine drugs. Ionization macroconstants, microconstants, zwitterionic equilibria, speciation curves as a function of the pH and the isoelectric points of a semi-essential amino acid, arginine, and an anti-inflammatory, niflumic acid, were calculated.     

Carbon‐based Nanosensors for Salicylate Determination in Pharmaceutical Preparations

Thiourea derivative‐based carbon paste electrode (TUD1‐CPE) was constructed as a potentiometric sensor for the determination of salicylate anion in pharmaceutical formulations, Aspocid® and Aspirin®. The optimized CPE contained 45.5 % graphite, 0.5 % reduced graphene oxide (rGO), 46.0 % nitrophenyl octyl ether (NPOE) plasticizer, 5.0 % TUD1 ionophore, and 3.0 % tridodecylmethyl ammonium chloride as additive. The incorporation of NPOE of high dielectric constant, and rGO in electrode caused better performance of the sensor; Nernstian response of 59.0 mV decade^?1 in the concentration range of 10^?1–10^?5 mole L^?1, a detection limit of 1×10^?5 mole L^?1 in a very short response time of 6 seconds. The prepared sensor showed high selectivity against similar anions (i. e. , benzoate, I^?, SCN^?). Selectivity was confirmed by calculating the formation constant (K_β) using sandwich membrane method, where K_β for TUD1‐salicylate is 10^0.43. Theoretical calculations at DFT‐B3LY/6‐31G** level of theory were performed to find interaction mechanism, Energies of HOMO and LUMO orbitals, non‐linear optical (NLO) properties (the electronic dipole moment (μ), first‐order hyperpolarizability (β), the hyper‐Rayleigh scattering (β_HRS) and the depolarization ratio (DR)), and other global properties; these calculations showed lower values of β and DR, higher value of β_HRS, and the shortest lengths of the four N?H bonds between TUD1 and salicylate which confirm their strong complexation and salicylate‐selectivity. Also, all the studied anion‐TUD1 exhibited relatively high NLO properties, and these results were considered as a preliminary study for investigating new types of NLO bearing materials. The sensors were applied successfully for the determination of salicylate anion in Aspocid® and Aspirin®.     

Determination of hypophosphite and phosphite by their reduction of iodine,iodate, or periodate and mercury(I) titration of iodide

A new potentiometric method is adopted for the accurate determination of hypophosphite and phosphite alone or in their mixtures using alcoholic iodine, iodate, and periodate. Hg(I) was used as titrant for the produced iodide in case of using alcoholic iodine as oxidant or for the excess added iodide in case of iodate and periodate as oxidants using silver amalgam as the indicatior electrode. The potential breaks which average 300 mV per 0.1 ml of titrant were sharp enough for precise determination of endpoints, and hence the high accuracy of the present method.     

Hydralazine-selective PVC membrane electrode based on hydralazinium tetraphenylborate

A hydralazine ion-selective PVC membrane electrode based on hydralazinium tetraphenylborate has been prepared with dioctyl phthalate as plasticizer. The electrode showed linear response with a slope factor of 57.5 mV/concentration decade at 20 degrees over the concentration range from 4 x 10(-4) to 10(-1)M hydralazine. The effects, on the electrode performance, of membrane composition, pH of the test solution and the time of soaking were studied. The electrode exhibited good selectivity for hydralazine with respect to a large number of inorganic cations and organic substances of biological importance. The standard-addition method and potentiometric titrations were used to determine hydralazine concentrations in pure solutions and in a pharmaceutical preparation, with satisfactory results.     

Spectrophotometric determination of aluminum and copper ions using spadns

Aluminum and copper ions are selectively estimated spectrophotometrically. These ions form colored complexes with spadns which have a maximum absorbance at 580 nm. The complexes formed with both cations are stable and pH dependant; aluminum is favorably complexed at pH 5, while copper is complexed at pH 7.The percentage recoveries were found to be 99.69 ± 0.75 and 99.32 ± 0.6 with a minimum detection limit of 0.08 and 0.23 g ml^–1 for aluminum and copper ions respectively. There is insignificant interference from the 10-fold concentrations of other metal ions under the proposed reaction conditions.     

Charge-transfer complexes as polymerization inhibitors. I. Amine–chloranil complexes as inhibitors for the radical polymerization of methyl methacrylate

Charge-transfer complexes of N,N-dimethylaniline (DMA) and triethylamine (TEA) with chloranil have been investigated as inhibitors for the sensitized polymerization of methyl methacrylate (MMA) in bulk and in solution. Complete inhibition is achieved by the complexes of both amines followed by retardation only in case of DMA. The higher inhibiting efficiency of the TEA complexes is attributed to their greater stability. The polymers formed in the presence of chloranil alone or its complexes with both amines are quinonoid and contain no combined nitrogen. The results support the idea that inhibition reaction involve electron transfer from the growing chains to the quinone, with formation of molecular complexes of polymeric cations and semiquinone anions. The latter are the actual inhibiting species, so that the efficiency of inhibiting depends on their concentration, which is determined by the stability of the molecular complexes formed. The inhibition reactions should accordingly be considered as oxidation–reduction processes in which the growing chains are the electron donors. The suggested mechanism affords an explanation for the great differences in the inhibiting power of a particular quinone for the polymerization of different monomers.     

Spectrophotometric Determination of Piperazine,Piperazine Salts and Diethylcarbamazine Citrate with Chloranilic Acid

Abstract

A rapid and sensitive spectrophotometric method is developed for the quantitative determination of piperazine, piperazine salts and diethylcarbamazine citrate. The method is based on the formation of donor-acceptor complexes between the compound and chloranilic acid. The interaction product has a characteristic absorption maximum at about 345 nm. The system obeys Beer's law in the concentration range of 1–10 ugml^?1 of piperazine hexahydrate, adipate, phosphate, citrate and diethylcarbamazine citrate. The effects of several experimantal variables have been studied and the stoichiometric composition of the complex has been determined. The developed procedure has been found to be simple, rapid and precise and its application to various dosage forms was demonstrated and yields results comparable with the standard method.